[Intel-gfx] [PATCH 3/3] drm/i915: Disable all planes for load detection, v2.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Wed Dec 20 09:35:45 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
We don't need any active planes during load detection, so just disable
them all. This saves us from having to come up with a suitable
framebuffer. And we also avoid leaving sprite/cursor planes on and
potentially presenting them at a peculiar location during the load
detection.
Changes since v1 (Maarten):
- Add missing call to add_all_affected_planes.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
---
drivers/gpu/drm/i915/intel_display.c | 147 +++++------------------------------
1 file changed, 18 insertions(+), 129 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7e833268c9df..ef61f9a75c93 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -9689,111 +9689,27 @@ intel_framebuffer_create(struct drm_i915_gem_object *obj,
return ERR_PTR(ret);
}
-static u32
-intel_framebuffer_pitch_for_width(int width, int bpp)
-{
- u32 pitch = DIV_ROUND_UP(width * bpp, 8);
- return ALIGN(pitch, 64);
-}
-
-static u32
-intel_framebuffer_size_for_mode(const struct drm_display_mode *mode, int bpp)
-{
- u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
- return PAGE_ALIGN(pitch * mode->vdisplay);
-}
-
-static struct drm_framebuffer *
-intel_framebuffer_create_for_mode(struct drm_device *dev,
- const struct drm_display_mode *mode,
- int depth, int bpp)
-{
- struct drm_framebuffer *fb;
- struct drm_i915_gem_object *obj;
- struct drm_mode_fb_cmd2 mode_cmd = { 0 };
-
- obj = i915_gem_object_create(to_i915(dev),
- intel_framebuffer_size_for_mode(mode, bpp));
- if (IS_ERR(obj))
- return ERR_CAST(obj);
-
- mode_cmd.width = mode->hdisplay;
- mode_cmd.height = mode->vdisplay;
- mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
- bpp);
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
-
- fb = intel_framebuffer_create(obj, &mode_cmd);
- if (IS_ERR(fb))
- i915_gem_object_put(obj);
-
- return fb;
-}
-
-static struct drm_framebuffer *
-mode_fits_in_fbdev(struct drm_device *dev,
- const struct drm_display_mode *mode)
-{
-#ifdef CONFIG_DRM_FBDEV_EMULATION
- struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_i915_gem_object *obj;
- struct drm_framebuffer *fb;
-
- if (!dev_priv->fbdev)
- return NULL;
-
- if (!dev_priv->fbdev->fb)
- return NULL;
-
- obj = dev_priv->fbdev->fb->obj;
- BUG_ON(!obj);
-
- fb = &dev_priv->fbdev->fb->base;
- if (fb->pitches[0] < intel_framebuffer_pitch_for_width(mode->hdisplay,
- fb->format->cpp[0] * 8))
- return NULL;
-
- if (obj->base.size < mode->vdisplay * fb->pitches[0])
- return NULL;
-
- drm_framebuffer_get(fb);
- return fb;
-#else
- return NULL;
-#endif
-}
-
-static int intel_modeset_setup_plane_state(struct drm_atomic_state *state,
- struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_framebuffer *fb,
- int x, int y)
+static int intel_modeset_disable_planes(struct drm_atomic_state *state,
+ struct drm_crtc *crtc)
{
+ struct drm_plane *plane;
struct drm_plane_state *plane_state;
- int hdisplay, vdisplay;
- int ret;
-
- plane_state = drm_atomic_get_plane_state(state, crtc->primary);
- if (IS_ERR(plane_state))
- return PTR_ERR(plane_state);
-
- if (mode)
- drm_mode_get_hv_timing(mode, &hdisplay, &vdisplay);
- else
- hdisplay = vdisplay = 0;
+ int ret, i;
- ret = drm_atomic_set_crtc_for_plane(plane_state, fb ? crtc : NULL);
+ ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
return ret;
- drm_atomic_set_fb_for_plane(plane_state, fb);
- plane_state->crtc_x = 0;
- plane_state->crtc_y = 0;
- plane_state->crtc_w = hdisplay;
- plane_state->crtc_h = vdisplay;
- plane_state->src_x = x << 16;
- plane_state->src_y = y << 16;
- plane_state->src_w = hdisplay << 16;
- plane_state->src_h = vdisplay << 16;
+
+ for_each_new_plane_in_state(state, plane, plane_state, i) {
+ if (plane_state->crtc != crtc)
+ continue;
+
+ ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
+ if (ret)
+ return ret;
+
+ drm_atomic_set_fb_for_plane(plane_state, NULL);
+ }
return 0;
}
@@ -9811,7 +9727,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_crtc *crtc = NULL;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_framebuffer *fb;
struct drm_mode_config *config = &dev->mode_config;
struct drm_atomic_state *state = NULL, *restore_state = NULL;
struct drm_connector_state *connector_state;
@@ -9879,10 +9794,6 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
found:
intel_crtc = to_intel_crtc(crtc);
- ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
- if (ret)
- goto fail;
-
state = drm_atomic_state_alloc(dev);
restore_state = drm_atomic_state_alloc(dev);
if (!state || !restore_state) {
@@ -9914,39 +9825,17 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
if (!mode)
mode = &load_detect_mode;
- /* We need a framebuffer large enough to accommodate all accesses
- * that the plane may generate whilst we perform load detection.
- * We can not rely on the fbcon either being present (we get called
- * during its initialisation to detect all boot displays, or it may
- * not even exist) or that it is large enough to satisfy the
- * requested mode.
- */
- fb = mode_fits_in_fbdev(dev, mode);
- if (fb == NULL) {
- DRM_DEBUG_KMS("creating tmp fb for load-detection\n");
- fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32);
- } else
- DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n");
- if (IS_ERR(fb)) {
- DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n");
- ret = PTR_ERR(fb);
- goto fail;
- }
-
- ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
- drm_framebuffer_put(fb);
+ ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
if (ret)
goto fail;
- ret = drm_atomic_set_mode_for_crtc(&crtc_state->base, mode);
+ ret = intel_modeset_disable_planes(state, crtc);
if (ret)
goto fail;
ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
if (!ret)
ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
- if (!ret)
- ret = PTR_ERR_OR_ZERO(drm_atomic_get_plane_state(restore_state, crtc->primary));
if (ret) {
DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
goto fail;
--
2.15.1
More information about the Intel-gfx
mailing list