[Intel-gfx] [PATCH i-g-t 2/3] tests/kms_cursor_legacy: Perform lazy cleanup between tests
Mika Kahola
mika.kahola at intel.com
Fri Dec 22 09:14:04 UTC 2017
On Thu, 2017-12-07 at 14:40 +0100, Maarten Lankhorst wrote:
> Instead of assuming each subtest cleans up after itself, assume it
> fails and doesn't. Now that igt_kms can clean up stale events, we
> can just force each subtest to only clean up its framebuffers,
> which isn't harmful if it failed.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> tests/kms_cursor_legacy.c | 88 +++++++----------------------------
> ------------
> 1 file changed, 12 insertions(+), 76 deletions(-)
>
> diff --git a/tests/kms_cursor_legacy.c b/tests/kms_cursor_legacy.c
> index 5720dbef90d3..94d91e9c921a 100644
> --- a/tests/kms_cursor_legacy.c
> +++ b/tests/kms_cursor_legacy.c
> @@ -45,6 +45,8 @@
>
> IGT_TEST_DESCRIPTION("Stress legacy cursor ioctl");
>
> +igt_pipe_crc_t *pipe_crc;
> +
> static void stress(igt_display_t *display,
> enum pipe pipe, int num_children, unsigned mode,
> int timeout)
> @@ -203,22 +205,6 @@ static void populate_cursor_args(igt_display_t
> *display, enum pipe pipe,
> arg[1] = *arg;
> }
>
> -static void do_cleanup_display(igt_display_t *display)
> -{
> - enum pipe pipe;
> - igt_output_t *output;
> - igt_plane_t *plane;
> -
> - for_each_pipe(display, pipe)
> - for_each_plane_on_pipe(display, pipe, plane)
> - igt_plane_set_fb(plane, NULL);
> -
> - for_each_connected_output(display, output)
> - igt_output_set_pipe(output, PIPE_NONE);
> -
> - igt_display_commit2(display, display->is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
> -}
> -
> static enum pipe find_connected_pipe(igt_display_t *display, bool
> second)
> {
> enum pipe pipe, first = PIPE_NONE;
> @@ -226,6 +212,14 @@ static enum pipe
> find_connected_pipe(igt_display_t *display, bool second)
> igt_output_t *first_output = NULL;
> bool found = false;
>
> + if (!second) {
> + igt_pipe_crc_free(pipe_crc);
> + pipe_crc = NULL;
> +
> + /* Clear display, events will be eaten by commit..
> */
> + igt_display_reset(display);
> + }
> +
> for_each_pipe_with_valid_output(display, pipe, output) {
> if (first == pipe || output == first_output)
> continue;
> @@ -451,8 +445,6 @@ static void flip(igt_display_t *display,
>
> munmap(results, 4096);
>
> - do_cleanup_display(display);
> -
> igt_remove_fb(display->drm_fd, &fb_info);
> if (flip_pipe != cursor_pipe)
> igt_remove_fb(display->drm_fd, &fb_info2);
> @@ -608,7 +600,6 @@ static void basic_flip_cursor(igt_display_t
> *display,
> if (miss1 || miss2)
> igt_info("Failed to evade %i vblanks and missed %i
> page flips\n", miss1, miss2);
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
>
> @@ -758,7 +749,6 @@ static void flip_vs_cursor(igt_display_t
> *display, enum flip_test mode, int nloo
> sched_setaffinity(0, sizeof(oldmask), &oldmask);
> }
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
>
> @@ -768,34 +758,12 @@ static void flip_vs_cursor(igt_display_t
> *display, enum flip_test mode, int nloo
> igt_remove_fb(display->drm_fd, &cursor_fb2);
> }
>
> -static bool skip_on_unsupported_nonblocking_modeset(igt_display_t
> *display)
> -{
> - enum pipe pipe;
> - int ret;
> -
> - igt_display_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY
> | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> -
> - ret = igt_display_try_commit_atomic(display,
> DRM_MODE_ATOMIC_ALLOW_MODESET | DRM_MODE_ATOMIC_NONBLOCK, NULL);
> -
> - if (ret == -EINVAL)
> - return true;
> -
> - igt_assert_eq(ret, 0);
> -
> - /* Force the next state to update all crtc's, to synchronize
> with the nonblocking modeset. */
> - for_each_pipe(display, pipe)
> - igt_pipe_refresh(display, pipe, false);
> -
> - return false;
> -}
Just wondering why we need to remove this check for nonblocking modeset
that is not supported?
> -
> static void nonblocking_modeset_vs_cursor(igt_display_t *display,
> int loops)
> {
> struct igt_fb fb_info, cursor_fb;
> igt_output_t *output;
> enum pipe pipe = find_connected_pipe(display, false);
> struct drm_mode_cursor arg[2];
> - bool skip_test;
> igt_plane_t *cursor = NULL, *plane;
>
> igt_require(display->is_atomic);
> @@ -815,13 +783,9 @@ static void
> nonblocking_modeset_vs_cursor(igt_display_t *display, int loops)
>
> igt_skip_on(!cursor);
>
> - if ((skip_test =
> skip_on_unsupported_nonblocking_modeset(display)))
> - goto cleanup;
> -
> /*
> - * Start disabled, because
> skip_on_unsupported_nonblocking_modeset
> - * will have enabled this pipe. No way around it, since the
> first
> - * atomic commit may be unreliable with amount of events
> sent.
> + * Start disabled. No way around it, since the first atomic
> + * commit may be unreliable with amount of events sent.
> */
> igt_output_set_pipe(output, PIPE_NONE);
> igt_display_commit2(display, COMMIT_ATOMIC);
> @@ -873,13 +837,8 @@ static void
> nonblocking_modeset_vs_cursor(igt_display_t *display, int loops)
> igt_reset_timeout();
> }
>
> -cleanup:
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> -
> - if (skip_test)
> - igt_skip("Nonblocking modeset is not supported by
> this kernel\n");
> }
>
> static void two_screens_flip_vs_cursor(igt_display_t *display, int
> nloops, bool modeset, bool atomic)
> @@ -891,7 +850,6 @@ static void
> two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool
> enum pipe pipe = find_connected_pipe(display, false);
> enum pipe pipe2 = find_connected_pipe(display, true);
> igt_output_t *output, *output2;
> - bool skip_test = false;
>
> igt_fail_on(modeset && !atomic);
>
> @@ -912,9 +870,6 @@ static void
> two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool
>
> arg2[1].x = arg2[1].y = 192;
>
> - if (modeset && (skip_test =
> skip_on_unsupported_nonblocking_modeset(display)))
> - goto cleanup;
> -
> igt_display_commit2(display, display->is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
>
> vblank_start = get_vblank(display->drm_fd, pipe,
> DRM_VBLANK_NEXTONMISS);
> @@ -977,14 +932,9 @@ static void
> two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool
> }
> }
>
> -cleanup:
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &fb2_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> -
> - if (skip_test)
> - igt_skip("Nonblocking modeset is not supported by
> this kernel\n");
> }
>
> static void cursor_vs_flip(igt_display_t *display, enum flip_test
> mode, int nloops)
> @@ -1066,7 +1016,6 @@ static void cursor_vs_flip(igt_display_t
> *display, enum flip_test mode, int nloo
> vrefresh*target, vrefresh*target / 2);
> }
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> munmap((void *)shared, 4096);
> @@ -1173,7 +1122,6 @@ static void
> two_screens_cursor_vs_flip(igt_display_t *display, int nloops, bool
> vrefresh[child]*target[child],
> vrefresh[child]*target[child] / 2);
> }
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info[0]);
> igt_remove_fb(display->drm_fd, &fb_info[1]);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> @@ -1187,7 +1135,6 @@ static void flip_vs_cursor_crc(igt_display_t
> *display, bool atomic)
> struct igt_fb fb_info, cursor_fb;
> unsigned vblank_start;
> enum pipe pipe = find_connected_pipe(display, false);
> - igt_pipe_crc_t *pipe_crc;
> igt_crc_t crcs[3];
>
> if (atomic)
> @@ -1232,10 +1179,8 @@ static void flip_vs_cursor_crc(igt_display_t
> *display, bool atomic)
> igt_assert_crc_equal(&crcs[i], &crcs[2]);
> }
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> - igt_pipe_crc_free(pipe_crc);
> }
>
> static void flip_vs_cursor_busy_crc(igt_display_t *display, bool
> atomic)
> @@ -1245,7 +1190,6 @@ static void
> flip_vs_cursor_busy_crc(igt_display_t *display, bool atomic)
> struct igt_fb fb_info[2], cursor_fb;
> unsigned vblank_start;
> enum pipe pipe = find_connected_pipe(display, false);
> - igt_pipe_crc_t *pipe_crc;
> igt_pipe_t *pipe_connected = &display->pipes[pipe];
> igt_plane_t *plane_primary =
> igt_pipe_get_plane_type(pipe_connected, DRM_PLANE_TYPE_PRIMARY);
> igt_crc_t crcs[2];
> @@ -1333,17 +1277,9 @@ static void
> flip_vs_cursor_busy_crc(igt_display_t *display, bool atomic)
> free(received_crcs);
> }
>
> - do_cleanup_display(display);
> igt_remove_fb(display->drm_fd, &fb_info[1]);
> igt_remove_fb(display->drm_fd, &fb_info[0]);
> igt_remove_fb(display->drm_fd, &cursor_fb);
> -
> - /*
> - * igt_pipe_crc_stop() may force a modeset for workarounds,
> call
> - * it after do_cleanup_display since we disable the display
> anyway.
> - */
> - igt_pipe_crc_stop(pipe_crc);
> - igt_pipe_crc_free(pipe_crc);
> }
>
> igt_main
--
Mika Kahola - Intel OTC
More information about the Intel-gfx
mailing list