[Intel-gfx] [PATCH] drm/i915: Avoid tweaking evaluation thresholds on Baytrail v2

Mika Kuoppala mika.kuoppala at linux.intel.com
Wed Feb 15 13:51:26 UTC 2017


Chris Wilson <chris at chris-wilson.co.uk> writes:

> On Wed, Feb 15, 2017 at 02:37:50PM +0200, Mika Kuoppala wrote:
>> Certain Baytrails, namely the 4 cpu core variants, have been
>> plaqued by spurious system hangs, mostly occurring with light loads.
>> 
>> Multiple bisects by various people point to a commit which changes the
>> reclocking strategy for Baytrail to follow its bigger brethen:
>> commit 8fb55197e64d ("drm/i915: Agressive downclocking on Baytrail")
>> 
>> There is also a review comment attached to this commit from Deepak S
>> on avoiding punit access on Cherryview and thus it was excluded on
>> common reclocking path. By taking the same approach and omitting
>> the punit access by not tweaking the thresholds when the hardware
>> has been asked to move into different frequency, considerable gains
>> in stability have been observed.
>> 
>> With J1900 box, light render/video load would end up in system hang
>> in usually less than 12 hours. With this patch applied, the cumulative
>> uptime has now been 34 days without issues. To provoke system hang,
>> light loads on both render and bsd engines in parallel have been used:
>> glxgears >/dev/null 2>/dev/null &
>> mpv --vo=vaapi --hwdec=vaapi --loop=inf vid.mp4
>> 
>> So far, author has not witnessed system hang with above load
>> and this patch applied. Reports from the tenacious people at
>> kernel bugzilla are also promising.
>> 
>> Considering that the punit access frequency with this patch is
>> considerably less, there is a possibility that this will push
>> the, still unknown, root cause past the triggering point on most loads.
>> 
>> But as we now can reliably reproduce the hang independently,
>> we can reduce the pain that users are having and use a
>> static thresholds until a root cause is found.
>> 
>> References: https://bugzilla.kernel.org/show_bug.cgi?id=109051
>> Cc: Chris Wilson <chris at chris-wilson.co.uk>
>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> Cc: Len Brown <len.brown at intel.com>
>> Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
>> Cc: Jani Nikula <jani.nikula at intel.com>
>> Cc: fritsch at xbmc.org
>> Cc: miku at iki.fi
>> Cc: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
>> CC: Michal Feix <michal at feix.cz>
>> Cc: Hans de Goede <hdegoede at redhat.com>
>> Cc: Deepak S <deepak.s at linux.intel.com>
>> Cc: Jarkko Nikula <jarkko.nikula at linux.intel.com>
>> Cc: <stable at vger.kernel.org> # v4.2+
>> Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>> Signed-off-by: Mika Kuoppala <mika.kuoppala at intel.com>
>> ---
>>  drivers/gpu/drm/i915/i915_irq.c | 4 ++--
>>  drivers/gpu/drm/i915/i915_reg.h | 2 ++
>>  drivers/gpu/drm/i915/intel_pm.c | 6 +++++-
>>  3 files changed, 9 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
>> index a887aef..319c02d 100644
>> --- a/drivers/gpu/drm/i915/i915_irq.c
>> +++ b/drivers/gpu/drm/i915/i915_irq.c
>> @@ -1095,7 +1095,7 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
>>  	if (pm_iir & GEN6_PM_RP_DOWN_EI_EXPIRED) {
>>  		if (!vlv_c0_above(dev_priv,
>>  				  &dev_priv->rps.down_ei, &now,
>> -				  dev_priv->rps.down_threshold))
>> +				  VLV_RP_DOWN_EI_THRESHOLD))
>>  			events |= GEN6_PM_RP_DOWN_THRESHOLD;
>>  		dev_priv->rps.down_ei = now;
>>  	}
>> @@ -1103,7 +1103,7 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
>>  	if (pm_iir & GEN6_PM_RP_UP_EI_EXPIRED) {
>>  		if (vlv_c0_above(dev_priv,
>>  				 &dev_priv->rps.up_ei, &now,
>> -				 dev_priv->rps.up_threshold))
>> +				 VLV_RP_UP_EI_THRESHOLD))
>
> A patch to set them as we set the default values during rps enable so
> that you don't break the debug interfaces.
>
>>  			events |= GEN6_PM_RP_UP_THRESHOLD;
>>  		dev_priv->rps.up_ei = now;
>>  	}
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 141a5c1..1297f6a 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -1135,6 +1135,8 @@ enum skl_disp_power_wells {
>>  #define 	CHV_BIAS_CPU_50_SOC_50 (3 << 2)
>>  
>>  #define VLV_CZ_CLOCK_TO_MILLI_SEC		100000
>> +#define VLV_RP_UP_EI_THRESHOLD			90
>> +#define VLV_RP_DOWN_EI_THRESHOLD		70
>>  
>>  /* vlv2 north clock has */
>>  #define CCK_FUSE_REG				0x8
>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
>> index 3d311e1..bce6aae 100644
>> --- a/drivers/gpu/drm/i915/intel_pm.c
>> +++ b/drivers/gpu/drm/i915/intel_pm.c
>> @@ -4971,7 +4971,11 @@ static int valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val)
>>  		if (err)
>>  			return err;
>>  
>> -		gen6_set_rps_thresholds(dev_priv, val);
>> +		/* When byt can survive without system hang with dynamic
>> +		 * sw freq adjustments, this restriction can be lifted.
>> +		 */
>> +		if (!IS_VALLEYVIEW(dev_priv))
>
> Are all vlv affected?

Not all. From what I have gathered, the 4 core variants are
the susceptile ones. For example N28xx works, N29xx freezes.

-Mika

> -Chris
>
> -- 
> Chris Wilson, Intel Open Source Technology Centre


More information about the Intel-gfx mailing list