[Intel-gfx] [PATCH 1/6] drm/i915: Store aux power domain in intel_dp
Ander Conselvan De Oliveira
conselvan2 at gmail.com
Thu Feb 16 12:23:12 UTC 2017
On Thu, 2017-02-16 at 11:05 +0200, Imre Deak wrote:
> On Fri, Feb 10, 2017 at 03:29:54PM +0200, Ander Conselvan de Oliveira wrote:
> > The aux power domain only makes sense in the DP code. Storing it in
> > struct intel_dp avoids some indirection.
> >
> > v2: Rebase
> > Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 50 -----------------------------
> > drivers/gpu/drm/i915/intel_dp.c | 61 ++++++++++++++----------------------
> > drivers/gpu/drm/i915/intel_drv.h | 3 +-
> > 3 files changed, 24 insertions(+), 90 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index ab78df9..1e70776 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -5589,26 +5589,6 @@ static enum intel_display_power_domain port_to_power_domain(enum port port)
> > }
> > }
> >
> > -static enum intel_display_power_domain port_to_aux_power_domain(enum port port)
> > -{
> > - switch (port) {
> > - case PORT_A:
> > - return POWER_DOMAIN_AUX_A;
> > - case PORT_B:
> > - return POWER_DOMAIN_AUX_B;
> > - case PORT_C:
> > - return POWER_DOMAIN_AUX_C;
> > - case PORT_D:
> > - return POWER_DOMAIN_AUX_D;
> > - case PORT_E:
> > - /* FIXME: Check VBT for actual wiring of PORT E */
> > - return POWER_DOMAIN_AUX_D;
> > - default:
> > - MISSING_CASE(port);
> > - return POWER_DOMAIN_AUX_A;
> > - }
> > -}
> > -
> > enum intel_display_power_domain
> > intel_display_port_power_domain(struct intel_encoder *intel_encoder)
> > {
> > @@ -5636,36 +5616,6 @@ intel_display_port_power_domain(struct intel_encoder *intel_encoder)
> > }
> > }
> >
> > -enum intel_display_power_domain
> > -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
> > -{
> > - struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> > - struct intel_digital_port *intel_dig_port;
> > -
> > - switch (intel_encoder->type) {
> > - case INTEL_OUTPUT_UNKNOWN:
> > - case INTEL_OUTPUT_HDMI:
> > - /*
> > - * Only DDI platforms should ever use these output types.
> > - * We can get here after the HDMI detect code has already set
> > - * the type of the shared encoder. Since we can't be sure
> > - * what's the status of the given connectors, play safe and
> > - * run the DP detection too.
> > - */
> > - WARN_ON_ONCE(!HAS_DDI(dev_priv));
> > - case INTEL_OUTPUT_DP:
> > - case INTEL_OUTPUT_EDP:
> > - intel_dig_port = enc_to_dig_port(&intel_encoder->base);
> > - return port_to_aux_power_domain(intel_dig_port->port);
> > - case INTEL_OUTPUT_DP_MST:
> > - intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
> > - return port_to_aux_power_domain(intel_dig_port->port);
>
> I was wondering where the dp->aux_power_domain gets inited for the MST case,
> but looks like this case could never happen even now. The patch looks ok:
Looks like I forgot to Cc Jani, but he had the same concern: https://lists.freed
esktop.org/archives/intel-gfx/2017-February/119027.html
The important part is that when the MST connector is initialized, it receives a
struct intel_dp as a parameter, and that struct has the aux power domain
initialized. That is what ends up in the ->primary field which the function
above uses.
> Reviewed-by: Imre Deak <imre.deak at intel.com>
Thanks,
Ander
>
> > - default:
> > - MISSING_CASE(intel_encoder->type);
> > - return POWER_DOMAIN_AUX_A;
> > - }
> > -}
> > -
> > static u64 get_crtc_power_domains(struct drm_crtc *crtc,
> > struct intel_crtc_state *crtc_state)
> > {
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index fa77e96..e2e4766 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -396,14 +396,12 @@ static void pps_lock(struct intel_dp *intel_dp)
> > struct intel_encoder *encoder = &intel_dig_port->base;
> > struct drm_device *dev = encoder->base.dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> >
> > /*
> > * See vlv_power_sequencer_reset() why we need
> > * a power domain reference here.
> > */
> > - power_domain = intel_display_port_aux_power_domain(encoder);
> > - intel_display_power_get(dev_priv, power_domain);
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >
> > mutex_lock(&dev_priv->pps_mutex);
> > }
> > @@ -414,12 +412,10 @@ static void pps_unlock(struct intel_dp *intel_dp)
> > struct intel_encoder *encoder = &intel_dig_port->base;
> > struct drm_device *dev = encoder->base.dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> >
> > mutex_unlock(&dev_priv->pps_mutex);
> >
> > - power_domain = intel_display_port_aux_power_domain(encoder);
> > - intel_display_power_put(dev_priv, power_domain);
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> > }
> >
> > static void
> > @@ -2005,9 +2001,7 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
> > {
> > struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> > u32 pp;
> > i915_reg_t pp_stat_reg, pp_ctrl_reg;
> > bool need_to_disable = !intel_dp->want_panel_vdd;
> > @@ -2023,8 +2017,7 @@ static bool edp_panel_vdd_on(struct intel_dp *intel_dp)
> > if (edp_have_panel_vdd(intel_dp))
> > return need_to_disable;
> >
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_get(dev_priv, power_domain);
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >
> > DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
> > port_name(intel_dig_port->port));
> > @@ -2082,8 +2075,6 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > struct intel_digital_port *intel_dig_port =
> > dp_to_dig_port(intel_dp);
> > - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > - enum intel_display_power_domain power_domain;
> > u32 pp;
> > i915_reg_t pp_stat_reg, pp_ctrl_reg;
> >
> > @@ -2113,8 +2104,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp *intel_dp)
> > if ((pp & PANEL_POWER_ON) == 0)
> > intel_dp->panel_power_off_time = ktime_get_boottime();
> >
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_put(dev_priv, power_domain);
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> > }
> >
> > static void edp_panel_vdd_work(struct work_struct *__work)
> > @@ -2227,11 +2217,8 @@ void intel_edp_panel_on(struct intel_dp *intel_dp)
> >
> > static void edp_panel_off(struct intel_dp *intel_dp)
> > {
> > - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> > u32 pp;
> > i915_reg_t pp_ctrl_reg;
> >
> > @@ -2263,8 +2250,7 @@ static void edp_panel_off(struct intel_dp *intel_dp)
> > wait_panel_off(intel_dp);
> >
> > /* We got a reference when we enabled the VDD. */
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_put(dev_priv, power_domain);
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> > }
> >
> > void intel_edp_panel_off(struct intel_dp *intel_dp)
> > @@ -4587,11 +4573,9 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> > struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > struct drm_device *dev = connector->dev;
> > enum drm_connector_status status;
> > - enum intel_display_power_domain power_domain;
> > u8 sink_irq_vector = 0;
> >
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_get(to_i915(dev), power_domain);
> > + intel_display_power_get(to_i915(dev), intel_dp->aux_power_domain);
> >
> > /* Can't disconnect eDP, but you can close the lid... */
> > if (is_edp(intel_dp))
> > @@ -4688,7 +4672,7 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> > if (status != connector_status_connected && !intel_dp->is_mst)
> > intel_dp_unset_edid(intel_dp);
> >
> > - intel_display_power_put(to_i915(dev), power_domain);
> > + intel_display_power_put(to_i915(dev), intel_dp->aux_power_domain);
> > return status;
> > }
> >
> > @@ -4716,7 +4700,6 @@ intel_dp_force(struct drm_connector *connector)
> > struct intel_dp *intel_dp = intel_attached_dp(connector);
> > struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> > struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> > - enum intel_display_power_domain power_domain;
> >
> > DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> > connector->base.id, connector->name);
> > @@ -4725,12 +4708,11 @@ intel_dp_force(struct drm_connector *connector)
> > if (connector->status != connector_status_connected)
> > return;
> >
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_get(dev_priv, power_domain);
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >
> > intel_dp_set_edid(intel_dp);
> >
> > - intel_display_power_put(dev_priv, power_domain);
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >
> > if (intel_encoder->type != INTEL_OUTPUT_EDP)
> > intel_encoder->type = INTEL_OUTPUT_DP;
> > @@ -4965,7 +4947,6 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
> > struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > struct drm_device *dev = intel_dig_port->base.base.dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> >
> > lockdep_assert_held(&dev_priv->pps_mutex);
> >
> > @@ -4979,8 +4960,7 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
> > * indefinitely.
> > */
> > DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
> > - power_domain = intel_display_port_aux_power_domain(&intel_dig_port->base);
> > - intel_display_power_get(dev_priv, power_domain);
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >
> > edp_panel_vdd_schedule_off(intel_dp);
> > }
> > @@ -5052,10 +5032,8 @@ enum irqreturn
> > intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> > {
> > struct intel_dp *intel_dp = &intel_dig_port->dp;
> > - struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > struct drm_device *dev = intel_dig_port->base.base.dev;
> > struct drm_i915_private *dev_priv = to_i915(dev);
> > - enum intel_display_power_domain power_domain;
> > enum irqreturn ret = IRQ_NONE;
> >
> > if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
> > @@ -5083,8 +5061,7 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> > return IRQ_NONE;
> > }
> >
> > - power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > - intel_display_power_get(dev_priv, power_domain);
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >
> > if (intel_dp->is_mst) {
> > if (intel_dp_check_mst_status(intel_dp) == -EINVAL) {
> > @@ -5112,7 +5089,7 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> > ret = IRQ_HANDLED;
> >
> > put_power:
> > - intel_display_power_put(dev_priv, power_domain);
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >
> > return ret;
> > }
> > @@ -5903,27 +5880,35 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > return false;
> > }
> >
> > +/* Set up the hotplug pin and aux power domain. */
> > static void
> > intel_dp_init_connector_port_info(struct intel_digital_port *intel_dig_port)
> > {
> > struct intel_encoder *encoder = &intel_dig_port->base;
> > + struct intel_dp *intel_dp = &intel_dig_port->dp;
> >
> > - /* Set up the hotplug pin. */
> > switch (intel_dig_port->port) {
> > case PORT_A:
> > encoder->hpd_pin = HPD_PORT_A;
> > + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_A;
> > break;
> > case PORT_B:
> > encoder->hpd_pin = HPD_PORT_B;
> > + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_B;
> > break;
> > case PORT_C:
> > encoder->hpd_pin = HPD_PORT_C;
> > + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_C;
> > break;
> > case PORT_D:
> > encoder->hpd_pin = HPD_PORT_D;
> > + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> > break;
> > case PORT_E:
> > encoder->hpd_pin = HPD_PORT_E;
> > +
> > + /* FIXME: Check VBT for actual wiring of PORT E */
> > + intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> > break;
> > default:
> > MISSING_CASE(intel_dig_port->port);
> > @@ -6003,6 +5988,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> > connector->interlace_allowed = true;
> > connector->doublescan_allowed = 0;
> >
> > + intel_dp_init_connector_port_info(intel_dig_port);
> > +
> > intel_dp_aux_init(intel_dp);
> >
> > INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> > @@ -6015,8 +6002,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> > else
> > intel_connector->get_hw_state = intel_connector_get_hw_state;
> >
> > - intel_dp_init_connector_port_info(intel_dig_port);
> > -
> > /* init MST on ports that can support it */
> > if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
> > (port == PORT_B || port == PORT_C || port == PORT_D))
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 6e37fba..3ddeaa6 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -950,6 +950,7 @@ struct intel_dp {
> > /* sink or branch descriptor */
> > struct intel_dp_desc desc;
> > struct drm_dp_aux aux;
> > + enum intel_display_power_domain aux_power_domain;
> > uint8_t train_set[4];
> > int panel_power_up_delay;
> > int panel_power_down_delay;
> > @@ -1421,8 +1422,6 @@ void hsw_enable_ips(struct intel_crtc *crtc);
> > void hsw_disable_ips(struct intel_crtc *crtc);
> > enum intel_display_power_domain
> > intel_display_port_power_domain(struct intel_encoder *intel_encoder);
> > -enum intel_display_power_domain
> > -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder);
> > void intel_mode_from_pipe_config(struct drm_display_mode *mode,
> > struct intel_crtc_state *pipe_config);
> >
> > --
> > 2.9.3
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list