[Intel-gfx] [PATCH 3/3] drm/i915/glk: Fix Geminilake scalers mode programming
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Feb 22 14:41:18 UTC 2017
On Wed, Feb 22, 2017 at 12:29:09PM +0200, Ander Conselvan de Oliveira wrote:
> Geminilake scalers can do 7x7 filtering for all supported input sizes,
> so it doesn't need the "high quality" mode programming, which was
> actually removed from that platform.
>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> ---
> drivers/gpu/drm/i915/intel_atomic.c | 14 ++++++++------
> drivers/gpu/drm/i915/intel_display.c | 2 +-
> drivers/gpu/drm/i915/intel_drv.h | 6 +++---
> 3 files changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index aa9160e..e65818e 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -121,7 +121,7 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
>
> /**
> * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
> - * @dev: DRM device
> + * @dev_priv: i915 device
This change makes the diff quite messy for what's essentially a
addition of two lines of code.
> * @crtc: intel crtc
> * @crtc_state: incoming crtc_state to validate and setup scalers
> *
> @@ -136,9 +136,9 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
> * 0 - scalers were setup succesfully
> * error code - otherwise
> */
> -int intel_atomic_setup_scalers(struct drm_device *dev,
> - struct intel_crtc *intel_crtc,
> - struct intel_crtc_state *crtc_state)
> +int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> + struct intel_crtc *intel_crtc,
> + struct intel_crtc_state *crtc_state)
> {
> struct drm_plane *plane = NULL;
> struct intel_plane *intel_plane;
> @@ -199,7 +199,7 @@ int intel_atomic_setup_scalers(struct drm_device *dev,
> */
> if (!plane) {
> struct drm_plane_state *state;
> - plane = drm_plane_from_index(dev, i);
> + plane = drm_plane_from_index(&dev_priv->drm, i);
> state = drm_atomic_get_plane_state(drm_state, plane);
> if (IS_ERR(state)) {
> DRM_DEBUG_KMS("Failed to add [PLANE:%d] to drm_state\n",
> @@ -247,7 +247,9 @@ int intel_atomic_setup_scalers(struct drm_device *dev,
> }
>
> /* set scaler mode */
> - if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
> + if (IS_GEMINILAKE(dev_priv)) {
> + scaler_state->scalers[*scaler_id].mode = 0;
> + } else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
> /*
> * when only 1 scaler is in use on either pipe A or B,
> * scaler 0 operates in high quality (HQ) mode.
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 000fb31..65e76d1 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10959,7 +10959,7 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
> ret = skl_update_scaler_crtc(pipe_config);
>
> if (!ret)
> - ret = intel_atomic_setup_scalers(dev, intel_crtc,
> + ret = intel_atomic_setup_scalers(dev_priv, intel_crtc,
> pipe_config);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0edc499..d9d96d6 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1910,9 +1910,9 @@ intel_atomic_get_existing_plane_state(struct drm_atomic_state *state,
> return to_intel_plane_state(plane_state);
> }
>
> -int intel_atomic_setup_scalers(struct drm_device *dev,
> - struct intel_crtc *intel_crtc,
> - struct intel_crtc_state *crtc_state);
> +int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> + struct intel_crtc *intel_crtc,
> + struct intel_crtc_state *crtc_state);
>
> /* intel_atomic_plane.c */
> struct intel_plane_state *intel_create_plane_state(struct drm_plane *plane);
> --
> 2.9.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list