[Intel-gfx] [PATCH] drm/i915/dsi: VLV/CHT Only wait for LP00 on MIPI PORT A

[Hans de Goede]

On some devices only MIPI PORT C is used, in this case checking the
MIPI PORT A CTRL AFE_LATCHOUT bit (there is no such bit for PORT C
on VLV/CHT) will result in false positive "DSI LP not going Low" errors
as this checks the PORT A clk status.

In case both ports are used we have already checked the AFE_LATCHOUT
bit when going through the for_each_dsi_port() loop for PORT A and
checking the same bit again for PORT C is a no-op.

BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=97061
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/i915/intel_dsi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 1fcce2c..185b8eb 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -458,10 +458,12 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
 							ULPS_STATE_ENTER);
 		usleep_range(2000, 2500);
 
-		/* Wait till Clock lanes are in LP-00 state for MIPI Port A
-		 * only. MIPI Port C has no similar bit for checking
+		/*
+		 * On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
+		 * Port A only. MIPI Port C has no similar bit for checking.
 		 */
-		if (intel_wait_for_register(dev_priv,
+		if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
+		    intel_wait_for_register(dev_priv,
 					    port_ctrl, AFE_LATCHOUT, 0,
 					    30))
 			DRM_ERROR("DSI LP not going Low\n");
-- 
2.9.3