[Intel-gfx] [PATCH v4 1/2] drm/i915/dp: Enable DP audio stall fix for gen9 platforms

Peter Fr├╝hberger fritsch at kodi.tv
Wed Jan 4 09:11:41 UTC 2017


Hi

On Sun, Nov 6, 2016 at 1:23 AM, Pandiyan, Dhinakaran <
dhinakaran.pandiyan at intel.com> wrote:

> On Sat, 2016-11-05 at 21:40 +0200, Jani Nikula wrote:
> > On Fri, 04 Nov 2016, "Pandiyan, Dhinakaran" <
> dhinakaran.pandiyan at intel.com> wrote:
> > > On Fri, 2016-11-04 at 17:48 +0200, Jani Nikula wrote:
> > >> On Wed, 26 Oct 2016, Dhinakaran Pandiyan <
> dhinakaran.pandiyan at intel.com> wrote:
> > >> > Enabling DP audio stall fix is necessary to play audio over DP
> HBR2. So,
> > >> > let's set this bit right before enabling the audio codec. Playing
> audio
> > >> > without setting this bit results in pipe FIFO underruns.
> > >> >
> > >> > This workaround is applicable only for audio sample rates up to
> 96kHz. For
> > >> > frequencies above 96kHz, this is insufficient and cdclk should be
> increased
> > >> > to at least 432 MHz, just like BDW. Since, the audio driver does not
> > >> > support sample rates > 48 kHz, we are safe with this fix for now.
> > >>
> > >> Do we still need this patch now that these two have been pushed?
> > >>
> > >> b30ce9e0552a drm/i915/dp: BDW cdclk fix for DP audio
> > >> 9c7540241885 drm/i915/dp: Extend BDW DP audio workaround to GEN9
> platforms
> > >>
> > >> BR,
> > >> Jani.
> > >>
> > >>
> > >>
> > >
> > > No, we are good afaik. This patch would have helped us to make use of a
> > > lower cdclk (337.5 MHz), with constraints on audio bit rate. Operating
> > > at 432 MHz, like we do now, rules out the need for this patch.
> >
> > Hmm, what about 5.4 Gbps link with 1 or 2 lanes?
> >
> > BR,
> > Jani.
> >
>
> Good point, I think it will depend on the audio sampling rate. But, I
> have to figure out a way to play high sampling rate audio (> 96 KHz) and
> test 5.4 Gbps with 1 or 2 lanes.
>
> The other option is to play safe and apply this patch with even lesser
> restrictions, say link rate >= 2.7 Gbps.
>
>
> -DK
>

as we are currently talking about high samplerates in this context. I
wanted to post a perhaps related issue. On my Apollo Lake (J4205) I have
two outputs. One DVI and one HDMI 2.0 via internal DP. Via DVI the
following works without issues, via DP it fails. As the original commit
mentions HBR, I think there is still something missing. We submit TrueHD,
DTS-HD via 192 khz and 16 bit format while setting AES0=2

You can easily reproduce with (you obviously need a DTS-HD, TrueHD capable
AVR attached to your HDMI 2.0 (DP) out):

#TrueHD
aplay -D 'hdmi:CARD=PCH,DEV=0,AES0=2' -c8 -fs16_le -r192000
testi.truehd.anssi1.ff.60s.spdif
#DTS-HD
aplay -D 'hdmi:CARD=PCH,DEV=0,AES0=2' -c8 -fs16_le -r192000
testi.dtshd.anssi1.ma-71-24.spdif
Samples:
http://www.avenard.org/files/media/mediatest/audiotest/HDAUDIO/Passthrough/

For the old HDMI 1.x chips it was fixed via:
https://bugs.freedesktop.org/show_bug.cgi?id=49055

Is this also planned for DP within that patch series?

Best regards
Peter

>
> > >
> > > -DK
> > >
> > >> >
> > >> > v2: Inlined the code change within hsw_audio_codec_enable() (Jani)
> > >> >     Fixed the port clock typo
> > >> >     Added TODO comment
> > >> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > >> > ---
> > >> >  drivers/gpu/drm/i915/i915_reg.h    |  5 +++++
> > >> >  drivers/gpu/drm/i915/intel_audio.c | 30
> +++++++++++++++++++++++++++++-
> > >> >  2 files changed, 34 insertions(+), 1 deletion(-)
> > >> >
> > >> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> b/drivers/gpu/drm/i915/i915_reg.h
> > >> > index 00efaa1..76dac48 100644
> > >> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > >> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > >> > @@ -6236,6 +6236,11 @@ enum {
> > >> >  #define SLICE_ECO_CHICKEN0                      _MMIO(0x7308)
> > >> >  #define   PIXEL_MASK_CAMMING_DISABLE            (1 << 14)
> > >> >
> > >> > +#define _CHICKEN_TRANS_A        0x420C0
> > >> > +#define _CHICKEN_TRANS_B        0x420C4
> > >> > +#define CHICKEN_TRANS(tran) _MMIO_TRANS(tran, _CHICKEN_TRANS_A,
> _CHICKEN_TRANS_B)
> > >> > +#define SPARE_13        (1<<13)
> > >> > +
> > >> >  /* WaCatErrorRejectionIssue */
> > >> >  #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG          _MMIO(0x9030)
> > >> >  #define  GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB       (1<<11)
> > >> > diff --git a/drivers/gpu/drm/i915/intel_audio.c
> b/drivers/gpu/drm/i915/intel_audio.c
> > >> > index 7093cfb..894f11e 100644
> > >> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > >> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > >> > @@ -283,6 +283,8 @@ static void hsw_audio_codec_disable(struct
> intel_encoder *encoder)
> > >> >  {
> > >> >          struct drm_i915_private *dev_priv =
> to_i915(encoder->base.dev);
> > >> >          struct intel_crtc *intel_crtc =
> to_intel_crtc(encoder->base.crtc);
> > >> > +        struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > >> > +        enum transcoder cpu_transcoder =
> crtc_config->cpu_transcoder;
> > >> >          enum pipe pipe = intel_crtc->pipe;
> > >> >          uint32_t tmp;
> > >> >
> > >> > @@ -290,13 +292,21 @@ static void hsw_audio_codec_disable(struct
> intel_encoder *encoder)
> > >> >
> > >> >          mutex_lock(&dev_priv->av_mutex);
> > >> >
> > >> > +        /*Disable DP audio stall fix for HBR2*/
> > >> > +        if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config)
> &&
> > >> > +            crtc_config->port_clock >= 540000) {
> > >> > +                tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > >> > +                tmp &= ~SPARE_13;
> > >> > +                I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > >> > +        }
> > >> > +
> > >> >          /* Disable timestamps */
> > >> >          tmp = I915_READ(HSW_AUD_CFG(pipe));
> > >> >          tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> > >> >          tmp |= AUD_CONFIG_N_PROG_ENABLE;
> > >> >          tmp &= ~AUD_CONFIG_UPPER_N_MASK;
> > >> >          tmp &= ~AUD_CONFIG_LOWER_N_MASK;
> > >> > -        if (intel_crtc_has_dp_encoder(intel_crtc->config))
> > >> > +        if (intel_crtc_has_dp_encoder(crtc_config))
> > >> >                  tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > >> >          I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > >> >
> > >> > @@ -315,6 +325,8 @@ static void hsw_audio_codec_enable(struct
> drm_connector *connector,
> > >> >  {
> > >> >          struct drm_i915_private *dev_priv =
> to_i915(connector->dev);
> > >> >          struct intel_crtc *intel_crtc =
> to_intel_crtc(intel_encoder->base.crtc);
> > >> > +        struct intel_crtc_state *crtc_config =  intel_crtc->config;
> > >> > +        enum transcoder cpu_transcoder =
> crtc_config->cpu_transcoder;
> > >> >          enum pipe pipe = intel_crtc->pipe;
> > >> >          enum port port = intel_encoder->port;
> > >> >          const uint8_t *eld = connector->eld;
> > >> > @@ -326,6 +338,22 @@ static void hsw_audio_codec_enable(struct
> drm_connector *connector,
> > >> >
> > >> >          mutex_lock(&dev_priv->av_mutex);
> > >> >
> > >> > +        /* Enable DP audio stall fix for HBR2
> > >> > +         *
> > >> > +         * TODO: This workaround is applicable only for audio
> sample rates up
> > >> > +         * to 96kHz. For frequencies above 96kHz, this is
> insufficient and
> > >> > +         * cdclk should be increased to at least 432 MHz, just
> like BDW. Since,
> > >> > +         * the audio driver does not support sample rates > 48
> kHz, we are safe
> > >> > +         * with this fix for now.
> > >> > +         */
> > >> > +
> > >> > +        if (IS_GEN9(dev_priv) && intel_crtc_has_dp_encoder(crtc_config)
> &&
> > >> > +            crtc_config->port_clock >= 540000) {
> > >> > +                tmp = I915_READ(CHICKEN_TRANS(cpu_transcoder));
> > >> > +                tmp |= SPARE_13;
> > >> > +                I915_WRITE(CHICKEN_TRANS(cpu_transcoder), tmp);
> > >> > +        }
> > >> > +
> > >> >          /* Enable audio presence detect, invalidate ELD */
> > >> >          tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
> > >> >          tmp |= AUDIO_OUTPUT_ENABLE(pipe);
> > >>
> > >
> >
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20170104/074c3d44/attachment.html>


More information about the Intel-gfx mailing list