[Intel-gfx] [PATCH 01/10] drm : adds Y-coordinate and Colorimetry Format

[Rodrigo Vivi]

patch merged to dinq. thanks for patch and review.

On Mon, Jan 2, 2017 at 3:34 AM vathsala nagaraju <
vathsala.nagaraju at intel.com> wrote:

> PSR2 vsc revision number hb2( as per table 6-11)is updated to
> 4 or 5 based on Y cordinate and Colorimetry Format as below
> 04h = 3D stereo + PSR/PSR2 + Y-coordinate.
> 05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
> Format indication. A DP Source device is allowed to indicate the pixel
> encoding/colorimetry format to the DP Sink device with VSC SDP only when
> the DP Sink device supports it (
> i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
> DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
> is set to 1).
>
> v2: (Jani)
> - Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
> - Add DP_PSR2_SU_GRANULARITY_REQUIRED.
> - Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
> - Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
>
> v3: (Jani)
> - Add support for bits 7:4 and 1 as per DP v1.4 for
>   DPRX_FEATURE_ENUMERATION_LIST.
>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Jim Bride <jim.bride at linux.intel.com>
> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
> Signed-off-by: Patil Deepti <deepti.patil at intel.com>
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  include/drm/drm_dp_helper.h | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 55bbeb0..0468135 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -194,7 +194,8 @@
>  # define DP_PSR_SETUP_TIME_0                (6 << 1)
>  # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
>  # define DP_PSR_SETUP_TIME_SHIFT            1
> -
> +# define DP_PSR2_SU_Y_COORDINATE_REQUIRED   (1 << 4)  /* eDP 1.4a */
> +# define DP_PSR2_SU_GRANULARITY_REQUIRED    (1 << 5)  /* eDP 1.4b */
>  /*
>   * 0x80-0x8f describe downstream port capabilities, but there are two
> layouts
>   * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was
> not,
> @@ -568,6 +569,16 @@
>  #define DP_RECEIVER_ALPM_STATUS                    0x200b  /* eDP 1.4 */
>  # define DP_ALPM_LOCK_TIMEOUT_ERROR        (1 << 0)
>
> +#define DP_DPRX_FEATURE_ENUMERATION_LIST    0x2210  /* DP 1.3 */
> +# define DP_GTC_CAP                                    (1 << 0)  /* DP
> 1.3 */
> +# define DP_SST_SPLIT_SDP_CAP                          (1 << 1)  /* DP
> 1.4 */
> +# define DP_AV_SYNC_CAP                                        (1 << 2)
> /* DP 1.3 */
> +# define DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED      (1 << 3)  /* DP
> 1.3 */
> +# define DP_VSC_EXT_VESA_SDP_SUPPORTED                 (1 << 4)  /* DP
> 1.4 */
> +# define DP_VSC_EXT_VESA_SDP_CHAINING_SUPPORTED                (1 << 5)
> /* DP 1.4 */
> +# define DP_VSC_EXT_CEA_SDP_SUPPORTED                  (1 << 6)  /* DP
> 1.4 */
> +# define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED         (1 << 7)  /* DP
> 1.4 */
> +
>  /* DP 1.2 Sideband message defines */
>  /* peer device type - DP 1.2a Table 2-92 */
>  #define DP_PEER_DEVICE_NONE            0x0
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20170110/0a420103/attachment-0001.html>