[Intel-gfx] [RESEND PATCH i-g-t v4 5/5] Add support for hotplug testing with the Chamelium
Lyude
lyude at redhat.com
Fri Jan 20 18:58:24 UTC 2017
For the purpose of testing things such as hotplugging and bad monitors,
the ChromeOS team ended up designing a neat little device known as the
Chamelium. More information on this can be found here:
https://www.chromium.org/chromium-os/testing/chamelium
This adds support for a couple of things to intel-gpu-tools:
- igt library functions for connecting to udev and monitoring it for
hotplug events, loosely based off of the unfinished hotplugging
implementation in testdisplay
- Library functions for controlling the chamelium in tests using
xmlrpc. A couple of RPC calls were ommitted here, mainly because they
didn't seem very useful for our needs (yet)
- A set of functions for doing CRC checks and frame comparisons in
tests
- A set of basic tests using the Chamelium library.
Cc: Tomeu Vizoso <tomeu at tomeuvizoso.net>
Signed-off-by: Lyude <lyude at redhat.com>
Changes since v1:
- Don't try to guess connector mappings, have the user specify them
manually using a configuration file
- Open DRM fd using DRIVER_ANY, not DRIVER_INTEL
- Lower the hotplug timeout a little bit, since 30 seconds was leftover
from debugging these tests anyway
- Don't try to keep track of the original state of the chamelium ports,
and just leave them plugged in after each run. This makes more sense
to me, since I'd imagine in automated testing setups using chameliums
that all of the extra monitors will probably be provided by the
Chamelium to begin with, so keeping them plugged in would make sure
tests running afterwards that require >1 monitor don't get skipped.
- Add wait_for_connector() to the chamelium tests. After some more
testing, I found that depending on the system some tests would throw
false negatives due to us not waiting long enough for the system to
detect that we connected something to it. This mainly happened with
VGA connectors, since their lack of HPD makes them take significantly
longer for the hardware to notice. wait_for_connector() fixes this by
continually reprobing the status of the desired connector (without
relying on a hpd event happening, since that might never come) until
we get what we want, or we time out and fail.
- Use kmstest_get_property() for retrieving EDIDs instead of doing it by
hand
- Don't hardcode PIPE_A for bringing up the display, use kmstest to find
an appropriate CRTC to use.
Changes since v2:
- Fix incorrect usage of the list helpers when recording new EDIDs
- Add missing documentation
- Make sure documentation actually appears
- Since we finally got video capture working, add CRC functions and fix
the ones we couldn't actually test before
- In the exit handler, reset the xmlrpc env so we can properly reset the
Chamelium even after an RPC error
- Make sure compiling without Chamelium support still works
Changes since v3:
- Change the config file name from .igt_chamelium_rc to .igtrc
- Remove chamelium global context
- Get rid of define_common_connector_tests()
- Get rid of connector list, expose connectors as opaque objects and
provide helpers for accessing their attributes
- Get rid of configure.ac option for Chamelium
- Add tests for CRC functions
- Add frame dumping functions + tests
- Add FSM handling to chamelium_rpc()
- Use LIBUDEV_LIBS in automake, not UDEV_LIBS
- Documentation fixes
- Improve debugging output some more
- Remove skip_without_suspend_support, we no longer need to check for
suspend support before calling things
- Remove unnessecary malloc() checks with igt_assert()
- Don't use igt_require in chamelium_init, leave it up to the caller
whether or not to abort when failing to initialize the chamelium
- Use igt_assert_eq for making assertions about connector's statuses
- Define suspend/resume delay for tests as constant
---
configure.ac | 4 +
.../intel-gpu-tools/intel-gpu-tools-docs.xml | 1 +
lib/Makefile.am | 6 +
lib/Makefile.sources | 2 +
lib/igt.h | 1 +
lib/igt_chamelium.c | 1346 ++++++++++++++++++++
lib/igt_chamelium.h | 103 ++
tests/Makefile.am | 5 +-
tests/Makefile.sources | 1 +
tests/chamelium.c | 689 ++++++++++
10 files changed, 2157 insertions(+), 1 deletion(-)
create mode 100644 lib/igt_chamelium.c
create mode 100644 lib/igt_chamelium.h
create mode 100644 tests/chamelium.c
diff --git a/configure.ac b/configure.ac
index 411bfab..229185c 100644
--- a/configure.ac
+++ b/configure.ac
@@ -169,6 +169,10 @@ if test x"$udev" = xyes; then
fi
PKG_CHECK_MODULES(GLIB, glib-2.0)
+# for chamelium
+PKG_CHECK_MODULES(XMLRPC, xmlrpc_client)
+PKG_CHECK_MODULES(PIXMAN, pixman-1)
+
# -----------------------------------------------------------------------------
# Configuration options
# -----------------------------------------------------------------------------
diff --git a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml
index 91b2499..990bbb8 100644
--- a/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml
+++ b/docs/reference/intel-gpu-tools/intel-gpu-tools-docs.xml
@@ -34,6 +34,7 @@
<xi:include href="xml/igt_vc4.xml"/>
<xi:include href="xml/igt_vgem.xml"/>
<xi:include href="xml/igt_dummyload.xml"/>
+ <xi:include href="xml/igt_chamelium.xml"/>
</chapter>
<xi:include href="xml/igt_test_programs.xml"/>
diff --git a/lib/Makefile.am b/lib/Makefile.am
index 57d3dbb..7030ea2 100644
--- a/lib/Makefile.am
+++ b/lib/Makefile.am
@@ -31,6 +31,9 @@ AM_CFLAGS = \
$(KMOD_CFLAGS) \
$(PROCPS_CFLAGS) \
$(DEBUG_CFLAGS) \
+ $(XMLRPC_CFLAGS) \
+ $(LIBUDEV_CFLAGS) \
+ $(PIXMAN_CFLAGS) \
-DIGT_SRCDIR=\""$(abs_top_srcdir)/tests"\" \
-DIGT_DATADIR=\""$(pkgdatadir)"\" \
-DIGT_LOG_DOMAIN=\""$(subst _,-,$*)"\" \
@@ -47,5 +50,8 @@ libintel_tools_la_LIBADD = \
$(LIBUDEV_LIBS) \
$(LIBUNWIND_LIBS) \
$(TIMER_LIBS) \
+ $(XMLRPC_LIBS) \
+ $(LIBUDEV_LIBS) \
+ $(PIXMAN_LIBS) \
-lm
diff --git a/lib/Makefile.sources b/lib/Makefile.sources
index 53fdb54..8cb95d8 100644
--- a/lib/Makefile.sources
+++ b/lib/Makefile.sources
@@ -83,6 +83,8 @@ lib_source_list = \
uwildmat/uwildmat.c \
igt_kmod.c \
igt_kmod.h \
+ igt_chamelium.h \
+ igt_chamelium.c \
$(NULL)
.PHONY: version.h.tmp
diff --git a/lib/igt.h b/lib/igt.h
index a0028d5..a97923e 100644
--- a/lib/igt.h
+++ b/lib/igt.h
@@ -38,6 +38,7 @@
#include "igt_kms.h"
#include "igt_pm.h"
#include "igt_stats.h"
+#include "igt_chamelium.h"
#include "instdone.h"
#include "intel_batchbuffer.h"
#include "intel_chipset.h"
diff --git a/lib/igt_chamelium.c b/lib/igt_chamelium.c
new file mode 100644
index 0000000..2315ce6
--- /dev/null
+++ b/lib/igt_chamelium.c
@@ -0,0 +1,1346 @@
+/*
+ * Copyright © 2016 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Lyude Paul <lyude at redhat.com>
+ */
+
+#include "config.h"
+
+#include <string.h>
+#include <errno.h>
+#include <xmlrpc-c/base.h>
+#include <xmlrpc-c/client.h>
+#include <pthread.h>
+#include <glib.h>
+#include <pixman.h>
+#include <cairo.h>
+
+#include "igt.h"
+
+/**
+ * SECTION:igt_chamelium
+ * @short_description: Library for using the Chamelium into igt tests
+ * @title: Chamelium
+ * @include: igt_chamelium.h
+ *
+ * This library contains helpers for using Chameliums in IGT tests. This allows
+ * for tests to simulate more difficult tasks to automate such as display
+ * hotplugging, faulty display behaviors, etc.
+ *
+ * More information on the Chamelium can be found
+ * [on the ChromeOS project page](https://www.chromium.org/chromium-os/testing/chamelium).
+ *
+ * In order to run tests using the Chamelium, a valid configuration file must be
+ * present. The configuration file is a normal Glib keyfile (similar to Windows
+ * INI) structured like so:
+ *
+ * |[<!-- language="plain" -->
+ * [Chamelium]
+ * URL=http://chameleon:9992 # The URL used for connecting to the Chamelium's RPC server
+ *
+ * # The rest of the sections are used for defining connector mappings.
+ * # This is required so any tests using the Chamelium know which connector
+ * # on the test machine should be connected to each Chamelium port.
+ * #
+ * # In the event that any of these mappings are specified incorrectly,
+ * # any hotplugging tests for the incorrect connector mapping will fail.
+ *
+ * [Chamelium:DP-1] # The name of the DRM connector
+ * ChameliumPortID=1 # The ID of the port on the Chamelium this connector is attached to
+ *
+ * [Chamelium:HDMI-A-1]
+ * ChameliumPortID=3
+ * ]|
+ *
+ * By default, this file is expected to exist in ~/.igtrc . The directory for
+ * this can be overriden by setting the environment variable %IGT_CONFIG_PATH.
+ */
+
+struct chamelium_edid {
+ int id;
+ struct igt_list link;
+};
+
+struct chamelium_port {
+ unsigned int type;
+ int id;
+ int connector_id;
+ char *name;
+};
+
+struct chamelium_frame_dump {
+ unsigned char *bgr;
+ size_t size;
+ int width;
+ int height;
+ struct chamelium_port *port;
+};
+
+struct chamelium {
+ xmlrpc_env env;
+ xmlrpc_client *client;
+ char *url;
+
+ /* Indicates the last port to have been used for capturing video */
+ struct chamelium_port *capturing_port;
+
+ int drm_fd;
+
+ struct chamelium_edid *edids;
+ struct chamelium_port *ports;
+ int port_count;
+};
+
+static struct chamelium *cleanup_instance;
+
+/**
+ * chamelium_get_ports:
+ * @chamelium: The Chamelium instance to use
+ * @count: Where to store the number of ports
+ *
+ * Retrieves all of the ports currently configured for use with this chamelium
+ *
+ * Returns: an array containing a pointer to each configured chamelium port
+ */
+struct chamelium_port **chamelium_get_ports(struct chamelium *chamelium,
+ int *count)
+{
+ int i;
+ struct chamelium_port **ret =
+ calloc(sizeof(void*), chamelium->port_count);
+
+ *count = chamelium->port_count;
+ for (i = 0; i < chamelium->port_count; i++)
+ ret[i] = &chamelium->ports[i];
+
+ return ret;
+}
+
+/**
+ * chamelium_port_get_type:
+ * @port: The chamelium port to retrieve the type from
+ *
+ * Retrieves the DRM connector type of the physical port on the Chamelium. It
+ * should be noted that this type may differ from the type provided by the
+ * driver.
+ *
+ * Returns: the DRM connector type of the physical Chamelium port
+ */
+unsigned int chamelium_port_get_type(const struct chamelium_port *port) {
+ return port->type;
+}
+
+/**
+ * chamelium_port_get_connector:
+ * @chamelium: The Chamelium instance to use
+ * @port: The chamelium port to retrieve the DRM connector for
+ * @reprobe: Whether or not to reprobe the DRM connector
+ *
+ * Get a drmModeConnector object for the given Chamelium port, and optionally
+ * reprobe the port in the process
+ *
+ * Returns: a drmModeConnector object corresponding to the given port
+ */
+drmModeConnector *chamelium_port_get_connector(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool reprobe)
+{
+ drmModeConnector *connector;
+
+ if (reprobe)
+ connector = drmModeGetConnector(chamelium->drm_fd,
+ port->connector_id);
+ else
+ connector = drmModeGetConnectorCurrent(
+ chamelium->drm_fd, port->connector_id);
+
+ return connector;
+}
+
+/**
+ * chamelium_port_get_name:
+ * @port: The chamelium port to retrieve the name of
+ *
+ * Gets the name of the DRM connector corresponding to the given Chamelium
+ * port.
+ *
+ * Returns: the name of the DRM connector
+ */
+const char *chamelium_port_get_name(struct chamelium_port *port)
+{
+ return port->name;
+}
+
+/**
+ * chamelium_destroy_frame_dump:
+ * @dump: The frame dump to destroy
+ *
+ * Destroys the given frame dump and frees all of the resources associated with
+ * it.
+ */
+void chamelium_destroy_frame_dump(struct chamelium_frame_dump *dump)
+{
+ free(dump->bgr);
+ free(dump);
+}
+
+struct fsm_monitor_args {
+ struct chamelium *chamelium;
+ struct chamelium_port *port;
+ struct udev_monitor *mon;
+};
+
+/*
+ * Whenever resolutions or other factors change with the display output, the
+ * Chamelium's display receivers need to be fully reset in order to perform any
+ * frame-capturing related tasks. This requires cutting off the display then
+ * turning it back on, and is indicated by the Chamelium sending hotplug events
+ */
+static void *chamelium_fsm_mon(void *data)
+{
+ struct fsm_monitor_args *args = data;
+ drmModeConnector *connector;
+ int drm_fd = args->chamelium->drm_fd;
+
+ /*
+ * Wait for the chamelium to try unplugging the connector, otherwise
+ * the thread calling chamelium_rpc will kill us
+ */
+ igt_hotplug_detected(args->mon, 60);
+
+ /*
+ * Just in case the RPC call being executed returns before we complete
+ * the FSM modesetting sequence, so we don't leave the display in a bad
+ * state.
+ */
+ pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL);
+
+ igt_debug("Chamelium needs FSM, handling\n");
+ connector = chamelium_port_get_connector(args->chamelium, args->port,
+ false);
+ kmstest_set_connector_dpms(drm_fd, connector, DRM_MODE_DPMS_OFF);
+ kmstest_set_connector_dpms(drm_fd, connector, DRM_MODE_DPMS_ON);
+
+ drmModeFreeConnector(connector);
+ return NULL;
+}
+
+static xmlrpc_value *chamelium_rpc(struct chamelium *chamelium,
+ struct chamelium_port *fsm_port,
+ const char *method_name,
+ const char *format_str,
+ ...)
+{
+ xmlrpc_value *res;
+ va_list va_args;
+ struct fsm_monitor_args monitor_args;
+ pthread_t fsm_thread_id;
+
+ /* Cleanup the last error, if any */
+ if (chamelium->env.fault_occurred) {
+ xmlrpc_env_clean(&chamelium->env);
+ xmlrpc_env_init(&chamelium->env);
+ }
+
+ /* Unfortunately xmlrpc_client's event loop helpers are rather useless
+ * for implementing any sort of event loop, since they provide no way
+ * to poll for events other then the RPC response. This means in order
+ * to handle the chamelium attempting FSM, we have to fork into another
+ * thread and have that handle hotplugging displays
+ */
+ if (fsm_port) {
+ monitor_args.chamelium = chamelium;
+ monitor_args.port = fsm_port;
+ monitor_args.mon = igt_watch_hotplug();
+ pthread_create(&fsm_thread_id, NULL, chamelium_fsm_mon,
+ &monitor_args);
+ }
+
+ va_start(va_args, format_str);
+ xmlrpc_client_call2f_va(&chamelium->env, chamelium->client,
+ chamelium->url, method_name, format_str, &res,
+ va_args);
+ va_end(va_args);
+
+ if (fsm_port) {
+ pthread_cancel(fsm_thread_id);
+ igt_cleanup_hotplug(monitor_args.mon);
+ }
+
+ igt_assert_f(!chamelium->env.fault_occurred,
+ "Chamelium RPC call failed: %s\n",
+ chamelium->env.fault_string);
+
+ return res;
+}
+
+/**
+ * chamelium_plug:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the chamelium to plug
+ *
+ * Simulate a display connector being plugged into the system using the
+ * chamelium.
+ */
+void chamelium_plug(struct chamelium *chamelium, struct chamelium_port *port)
+{
+ igt_debug("Plugging %s\n", port->name);
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "Plug", "(i)", port->id));
+}
+
+/**
+ * chamelium_unplug:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the chamelium to unplug
+ *
+ * Simulate a display connector being unplugged from the system using the
+ * chamelium.
+ */
+void chamelium_unplug(struct chamelium *chamelium, struct chamelium_port *port)
+{
+ igt_debug("Unplugging port %s\n", port->name);
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "Unplug", "(i)",
+ port->id));
+}
+
+/**
+ * chamelium_is_plugged:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the Chamelium to check the status of
+ *
+ * Check whether or not the given port has been plugged into the system using
+ * #chamelium_plug.
+ *
+ * Returns: %true if the connector is set to plugged in, %false otherwise.
+ */
+bool chamelium_is_plugged(struct chamelium *chamelium,
+ struct chamelium_port *port)
+{
+ xmlrpc_value *res;
+ xmlrpc_bool is_plugged;
+
+ res = chamelium_rpc(chamelium, NULL, "IsPlugged", "(i)", port->id);
+
+ xmlrpc_read_bool(&chamelium->env, res, &is_plugged);
+ xmlrpc_DECREF(res);
+
+ return is_plugged;
+}
+
+/**
+ * chamelium_port_wait_video_input_stable:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the Chamelium to check the status of
+ * @timeout_secs: How long to wait for a video signal to appear before timing
+ * out
+ *
+ * Waits for a video signal to appear on the given port. This is useful for
+ * checking whether or not we've setup a monitor correctly.
+ *
+ * Returns: %true if a video signal was detected, %false if we timed out
+ */
+bool chamelium_port_wait_video_input_stable(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int timeout_secs)
+{
+ xmlrpc_value *res;
+ xmlrpc_bool is_on;
+
+ igt_debug("Waiting for video input to stabalize on %s\n", port->name);
+
+ res = chamelium_rpc(chamelium, port, "WaitVideoInputStable", "(ii)",
+ port->id, timeout_secs);
+
+ xmlrpc_read_bool(&chamelium->env, res, &is_on);
+ xmlrpc_DECREF(res);
+
+ return is_on;
+}
+
+/**
+ * chamelium_fire_hpd_pulses:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to fire the HPD pulses on
+ * @width_msec: How long each pulse should last
+ * @count: The number of pulses to send
+ *
+ * A convienence function for sending multiple hotplug pulses to the system.
+ * The pulses start at low (e.g. connector is disconnected), and then alternate
+ * from high (e.g. connector is plugged in) to low. This is the equivalent of
+ * repeatedly calling #chamelium_plug and #chamelium_unplug, waiting
+ * @width_msec between each call.
+ *
+ * If @count is even, the last pulse sent will be high, and if it's odd then it
+ * will be low. Resetting the HPD line back to it's previous state, if desired,
+ * is the responsibility of the caller.
+ */
+void chamelium_fire_hpd_pulses(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int width_msec, int count)
+{
+ xmlrpc_value *pulse_widths = xmlrpc_array_new(&chamelium->env);
+ xmlrpc_value *width = xmlrpc_int_new(&chamelium->env, width_msec);
+ int i;
+
+ igt_debug("Firing %d HPD pulses with width of %d msec on %s\n",
+ count, width_msec, port->name);
+
+ for (i = 0; i < count; i++)
+ xmlrpc_array_append_item(&chamelium->env, pulse_widths, width);
+
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "FireMixedHpdPulses",
+ "(iA)", port->id, pulse_widths));
+
+ xmlrpc_DECREF(width);
+ xmlrpc_DECREF(pulse_widths);
+}
+
+/**
+ * chamelium_fire_mixed_hpd_pulses:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to fire the HPD pulses on
+ * @...: The length of each pulse in milliseconds, terminated with a %0
+ *
+ * Does the same thing as #chamelium_fire_hpd_pulses, but allows the caller to
+ * specify the length of each individual pulse.
+ */
+void chamelium_fire_mixed_hpd_pulses(struct chamelium *chamelium,
+ struct chamelium_port *port, ...)
+{
+ va_list args;
+ xmlrpc_value *pulse_widths = xmlrpc_array_new(&chamelium->env), *width;
+ int arg;
+
+ igt_debug("Firing mixed HPD pulses on %s\n", port->name);
+
+ va_start(args, port);
+ for (arg = va_arg(args, int); arg; arg = va_arg(args, int)) {
+ width = xmlrpc_int_new(&chamelium->env, arg);
+ xmlrpc_array_append_item(&chamelium->env, pulse_widths, width);
+ xmlrpc_DECREF(width);
+ }
+ va_end(args);
+
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "FireMixedHpdPulses",
+ "(iA)", port->id, pulse_widths));
+
+ xmlrpc_DECREF(pulse_widths);
+}
+
+static void async_rpc_handler(const char *server_url, const char *method_name,
+ xmlrpc_value *param_array, void *user_data,
+ xmlrpc_env *fault, xmlrpc_value *result)
+{
+ /* We don't care about the responses */
+}
+
+/**
+ * chamelium_async_hpd_pulse_start:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to fire the HPD pulses on
+ * @high: Whether to fire a high pulse (e.g. simulate a connect), or a low
+ * pulse (e.g. simulate a disconnect)
+ * @delay_secs: How long to wait before sending the HPD pulse.
+ *
+ * Instructs the chamelium to send an hpd pulse after @delay_secs seconds have
+ * passed, without waiting for the chamelium to finish. This is useful for
+ * testing things such as hpd after a suspend/resume cycle, since we can't tell
+ * the chamelium to send a hotplug at the same time that our system is
+ * suspended.
+ *
+ * It is required that the user eventually call
+ * #chamelium_async_hpd_pulse_finish, to clean up the leftover XML-RPC
+ * responses from the chamelium.
+ */
+void chamelium_async_hpd_pulse_start(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool high, int delay_secs)
+{
+ xmlrpc_value *pulse_widths = xmlrpc_array_new(&chamelium->env), *width;
+
+ /* TODO: Actually implement something in the chameleon server to allow
+ * for delayed actions such as hotplugs. This would work a bit better
+ * and allow us to test suspend/resume on ports without hpd like VGA
+ */
+
+ igt_debug("Sending HPD pulse (%s) on %s with %d second delay\n",
+ high ? "high->low" : "low->high", port->name, delay_secs);
+
+ /* If we're starting at high, make the first pulse width 0 so we keep
+ * the port connected */
+ if (high) {
+ width = xmlrpc_int_new(&chamelium->env, 0);
+ xmlrpc_array_append_item(&chamelium->env, pulse_widths, width);
+ xmlrpc_DECREF(width);
+ }
+
+ width = xmlrpc_int_new(&chamelium->env, delay_secs * 1000);
+ xmlrpc_array_append_item(&chamelium->env, pulse_widths, width);
+ xmlrpc_DECREF(width);
+
+ xmlrpc_client_start_rpcf(&chamelium->env, chamelium->client,
+ chamelium->url,
+ "FireMixedHpdPulses", async_rpc_handler, NULL,
+ "(iA)", port->id, pulse_widths);
+ xmlrpc_DECREF(pulse_widths);
+}
+
+/**
+ * chamelium_async_hpd_pulse_finish:
+ * @chamelium: The Chamelium instance to use
+ *
+ * Waits for any asynchronous RPC started by #chamelium_async_hpd_pulse_start
+ * to complete, and then cleans up any leftover responses from the chamelium.
+ * If all of the RPC calls have already completed, this function returns
+ * immediately.
+ */
+void chamelium_async_hpd_pulse_finish(struct chamelium *chamelium)
+{
+ xmlrpc_client_event_loop_finish(chamelium->client);
+}
+
+/**
+ * chamelium_new_edid:
+ * @chamelium: The Chamelium instance to use
+ * @edid: The edid blob to upload to the chamelium
+ *
+ * Uploads and registers a new EDID with the chamelium. The EDID will be
+ * destroyed automatically when #chamelium_deinit is called.
+ *
+ * Returns: The ID of the EDID uploaded to the chamelium.
+ */
+int chamelium_new_edid(struct chamelium *chamelium, const unsigned char *edid)
+{
+ xmlrpc_value *res;
+ struct chamelium_edid *allocated_edid;
+ int edid_id;
+
+ res = chamelium_rpc(chamelium, NULL, "CreateEdid", "(6)",
+ edid, EDID_LENGTH);
+
+ xmlrpc_read_int(&chamelium->env, res, &edid_id);
+ xmlrpc_DECREF(res);
+
+ allocated_edid = malloc(sizeof(struct chamelium_edid));
+ memset(allocated_edid, 0, sizeof(*allocated_edid));
+
+ allocated_edid->id = edid_id;
+ igt_list_init(&allocated_edid->link);
+
+ if (chamelium->edids)
+ igt_list_add(&chamelium->edids->link, &allocated_edid->link);
+ else
+ chamelium->edids = allocated_edid;
+
+ return edid_id;
+}
+
+static void chamelium_destroy_edid(struct chamelium *chamelium, int edid_id)
+{
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "DestroyEdid", "(i)",
+ edid_id));
+}
+
+/**
+ * chamelium_port_set_edid:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the Chamelium to set the EDID on
+ * @edid_id: The ID of an EDID on the chamelium created with
+ * #chamelium_new_edid, or 0 to disable the EDID on the port
+ *
+ * Sets a port on the chamelium to use the specified EDID. This does not fire a
+ * hotplug pulse on it's own, and merely changes what EDID the chamelium port
+ * will report to us the next time we probe it. Users will need to reprobe the
+ * connectors themselves if they want to see the EDID reported by the port
+ * change.
+ */
+void chamelium_port_set_edid(struct chamelium *chamelium,
+ struct chamelium_port *port, int edid_id)
+{
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "ApplyEdid", "(ii)",
+ port->id, edid_id));
+}
+
+/**
+ * chamelium_port_set_ddc_state:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to change the DDC state on
+ * @enabled: Whether or not to enable the DDC bus
+ *
+ * This disables the DDC bus (e.g. the i2c line on the connector that gives us
+ * an EDID) of the specified port on the chamelium. This is useful for testing
+ * behavior on legacy connectors such as VGA, where the presence of a DDC bus
+ * is not always guaranteed.
+ */
+void chamelium_port_set_ddc_state(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool enabled)
+{
+ igt_debug("%sabling DDC bus on %s\n",
+ enabled ? "En" : "Dis", port->name);
+
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "SetDdcState", "(ib)",
+ port->id, enabled));
+}
+
+/**
+ * chamelium_port_get_ddc_state:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the Chamelium to check the status of
+ *
+ * Check whether or not the DDC bus on the specified chamelium port is enabled
+ * or not.
+ *
+ * Returns: %true if the DDC bus is enabled, %false otherwise.
+ */
+bool chamelium_port_get_ddc_state(struct chamelium *chamelium,
+ struct chamelium_port *port)
+{
+ xmlrpc_value *res;
+ xmlrpc_bool enabled;
+
+ res = chamelium_rpc(chamelium, NULL, "IsDdcEnabled", "(i)", port->id);
+ xmlrpc_read_bool(&chamelium->env, res, &enabled);
+
+ xmlrpc_DECREF(res);
+ return enabled;
+}
+
+/**
+ * chamelium_port_get_resolution:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port on the Chamelium to check
+ * @x: Where to store the horizontal resolution of the port
+ * @y: Where to store the verical resolution of the port
+ *
+ * Check the current reported display resolution of the specified port on the
+ * chamelium. This information is provided by the chamelium itself, not DRM.
+ * Useful for verifying that we really are scanning out at the resolution we
+ * think we are.
+ */
+void chamelium_port_get_resolution(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int *x, int *y)
+{
+ xmlrpc_value *res, *res_x, *res_y;
+
+ res = chamelium_rpc(chamelium, port, "DetectResolution", "(i)",
+ port->id);
+
+ xmlrpc_array_read_item(&chamelium->env, res, 0, &res_x);
+ xmlrpc_array_read_item(&chamelium->env, res, 1, &res_y);
+ xmlrpc_read_int(&chamelium->env, res_x, x);
+ xmlrpc_read_int(&chamelium->env, res_y, y);
+
+ xmlrpc_DECREF(res_x);
+ xmlrpc_DECREF(res_y);
+ xmlrpc_DECREF(res);
+}
+
+static void chamelium_get_captured_resolution(struct chamelium *chamelium,
+ int *w, int *h)
+{
+ xmlrpc_value *res, *res_w, *res_h;
+
+ res = chamelium_rpc(chamelium, NULL, "GetCapturedResolution", "()");
+
+ xmlrpc_array_read_item(&chamelium->env, res, 0, &res_w);
+ xmlrpc_array_read_item(&chamelium->env, res, 1, &res_h);
+ xmlrpc_read_int(&chamelium->env, res_w, w);
+ xmlrpc_read_int(&chamelium->env, res_h, h);
+
+ xmlrpc_DECREF(res_w);
+ xmlrpc_DECREF(res_h);
+ xmlrpc_DECREF(res);
+}
+
+static struct chamelium_frame_dump *frame_from_xml(struct chamelium *chamelium,
+ xmlrpc_value *frame_xml)
+{
+ struct chamelium_frame_dump *ret = malloc(sizeof(*ret));
+
+ chamelium_get_captured_resolution(chamelium, &ret->width, &ret->height);
+ ret->port = chamelium->capturing_port;
+ xmlrpc_read_base64(&chamelium->env, frame_xml, &ret->size,
+ (void*)&ret->bgr);
+
+ return ret;
+}
+
+/**
+ * chamelium_port_dump_pixels:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to perform the video capture on
+ * @x: The X coordinate to crop the screen capture to
+ * @y: The Y coordinate to crop the screen capture to
+ * @w: The width of the area to crop the screen capture to, or 0 for the whole
+ * screen
+ * @h: The height of the area to crop the screen capture to, or 0 for the whole
+ * screen
+ *
+ * Captures the currently displayed image on the given chamelium port,
+ * optionally cropped to a given region. In situations where pre-calculating
+ * CRCs may not be reliable, this can be used as an alternative for figuring
+ * out whether or not the correct images are being displayed on the screen.
+ *
+ * The frame dump data returned by this function should be freed when the
+ * caller is done with it using #chamelium_destroy_frame_dump.
+ *
+ * As an important note: some of the EDIDs provided by the Chamelium cause
+ * certain GPU drivers to default to using limited color ranges. This can cause
+ * video captures from the Chamelium to provide different images then expected
+ * due to the difference in color ranges (framebuffer uses full color range,
+ * but the video output doesn't), and as a result lead to CRC mismatches. To
+ * workaround this, the caller should force the connector to use full color
+ * ranges by using #kmstest_set_connector_broadcast_rgb before setting up the
+ * display.
+ *
+ * Returns: a chamelium_frame_dump struct
+ */
+struct chamelium_frame_dump *chamelium_port_dump_pixels(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int x, int y,
+ int w, int h)
+{
+ xmlrpc_value *res;
+ struct chamelium_frame_dump *frame;
+
+ res = chamelium_rpc(chamelium, port, "DumpPixels",
+ (w && h) ? "(iiiii)" : "(innnn)",
+ port->id, x, y, w, h);
+ chamelium->capturing_port = port;
+
+ frame = frame_from_xml(chamelium, res);
+ xmlrpc_DECREF(res);
+
+ return frame;
+}
+
+static void crc_from_xml(struct chamelium *chamelium,
+ xmlrpc_value *xml_crc, igt_crc_t *out)
+{
+ xmlrpc_value *res;
+ int i;
+
+ out->n_words = xmlrpc_array_size(&chamelium->env, xml_crc);
+ for (i = 0; i < out->n_words; i++) {
+ xmlrpc_array_read_item(&chamelium->env, xml_crc, i, &res);
+ xmlrpc_read_int(&chamelium->env, res, (int*)&out->crc[i]);
+ xmlrpc_DECREF(res);
+ }
+}
+
+/**
+ * chamelium_get_crc_for_area:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to perform the CRC checking on
+ * @x: The X coordinate on the emulated display to start calculating the CRC
+ * from
+ * @y: The Y coordinate on the emulated display to start calculating the CRC
+ * from
+ * @w: The width of the area to fetch the CRC from, or %0 for the whole display
+ * @h: The height of the area to fetch the CRC from, or %0 for the whole display
+ *
+ * Reads back the pixel CRC for an area on the specified chamelium port. This
+ * is the same as using the CRC readback from a GPU, the main difference being
+ * the data is provided by the chamelium and also allows us to specify a region
+ * of the screen to use as opposed to the entire thing.
+ *
+ * As an important note: some of the EDIDs provided by the Chamelium cause
+ * certain GPU drivers to default to using limited color ranges. This can cause
+ * video captures from the Chamelium to provide different images then expected
+ * due to the difference in color ranges (framebuffer uses full color range,
+ * but the video output doesn't), and as a result lead to CRC mismatches. To
+ * workaround this, the caller should force the connector to use full color
+ * ranges by using #kmstest_set_connector_broadcast_rgb before setting up the
+ * display.
+ *
+ * After the caller is finished with the EDID returned by this function, the
+ * caller should manually free the resources associated with it.
+ *
+ * Returns: The CRC read back from the chamelium
+ */
+igt_crc_t *chamelium_get_crc_for_area(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int x, int y, int w, int h)
+{
+ xmlrpc_value *res;
+ igt_crc_t *ret = malloc(sizeof(igt_crc_t));
+
+ res = chamelium_rpc(chamelium, port, "ComputePixelChecksum",
+ (w && h) ? "(iiiii)" : "(innnn)",
+ port->id, x, y, w, h);
+ chamelium->capturing_port = port;
+
+ crc_from_xml(chamelium, res, ret);
+ xmlrpc_DECREF(res);
+
+ return ret;
+}
+
+/**
+ * chamelium_start_capture:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to perform the video capture on
+ * @x: The X coordinate to crop the video to
+ * @y: The Y coordinate to crop the video to
+ * @w: The width of the cropped video, or %0 for the whole display
+ * @h: The height of the cropped video, or %0 for the whole display
+ *
+ * Starts capturing video frames on the given Chamelium port. Once the user is
+ * finished capturing frames, they should call #chamelium_stop_capture.
+ *
+ * A blocking, one-shot version of this function is available: see
+ * #chamelium_capture
+ *
+ * As an important note: some of the EDIDs provided by the Chamelium cause
+ * certain GPU drivers to default to using limited color ranges. This can cause
+ * video captures from the Chamelium to provide different images then expected
+ * due to the difference in color ranges (framebuffer uses full color range,
+ * but the video output doesn't), and as a result lead to CRC and frame dump
+ * comparison mismatches. To workaround this, the caller should force the
+ * connector to use full color ranges by using
+ * #kmstest_set_connector_broadcast_rgb before setting up the display.
+ */
+void chamelium_start_capture(struct chamelium *chamelium,
+ struct chamelium_port *port, int x, int y, int w, int h)
+{
+ xmlrpc_DECREF(chamelium_rpc(chamelium, port, "StartCapturingVideo",
+ (w && h) ? "(iiiii)" : "(innnn)",
+ port->id, x, y, w, h));
+ chamelium->capturing_port = port;
+}
+
+/**
+ * chamelium_stop_capture:
+ * @chamelium: The Chamelium instance to use
+ * @frame_count: The number of frames to wait to capture, or %0 to stop
+ * immediately
+ *
+ * Finishes capturing video frames on the given Chamelium port. If @frame_count
+ * is specified, this call will block until the given number of frames have been
+ * captured.
+ */
+void chamelium_stop_capture(struct chamelium *chamelium, int frame_count)
+{
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "StopCapturingVideo",
+ "(i)", frame_count));
+}
+
+/**
+ * chamelium_capture:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to perform the video capture on
+ * @x: The X coordinate to crop the video to
+ * @y: The Y coordinate to crop the video to
+ * @w: The width of the cropped video, or %0 for the whole display
+ * @h: The height of the cropped video, or %0 for the whole display
+ * @frame_count: The number of frames to capture
+ *
+ * Captures the given number of frames on the chamelium. This is equivalent to
+ * calling #chamelium_start_capture immediately followed by
+ * #chamelium_stop_capture. The caller is blocked until all of the frames have
+ * been captured.
+ *
+ * As an important note: some of the EDIDs provided by the Chamelium cause
+ * certain GPU drivers to default to using limited color ranges. This can cause
+ * video captures from the Chamelium to provide different images then expected
+ * due to the difference in color ranges (framebuffer uses full color range,
+ * but the video output doesn't), and as a result lead to CRC and frame dump
+ * comparison mismatches. To workaround this, the caller should force the
+ * connector to use full color ranges by using
+ * #kmstest_set_connector_broadcast_rgb before setting up the display.
+ */
+void chamelium_capture(struct chamelium *chamelium, struct chamelium_port *port,
+ int x, int y, int w, int h, int frame_count)
+{
+ xmlrpc_DECREF(chamelium_rpc(chamelium, port, "CaptureVideo",
+ (w && h) ? "(iiiiii)" : "(iinnnn)",
+ port->id, frame_count, x, y, w, h));
+ chamelium->capturing_port = port;
+}
+
+/**
+ * chamelium_read_captured_crcs:
+ * @chamelium: The Chamelium instance to use
+ * @frame_count: Where to store the number of CRCs we read in
+ *
+ * Reads all of the CRCs that have been captured thus far from the Chamelium.
+ *
+ * Returns: An array of @frame_count length containing all of the CRCs we read
+ */
+igt_crc_t *chamelium_read_captured_crcs(struct chamelium *chamelium,
+ int *frame_count)
+{
+ igt_crc_t *ret;
+ xmlrpc_value *res, *elem;
+ int i;
+
+ res = chamelium_rpc(chamelium, NULL, "GetCapturedChecksums", "(in)", 0);
+
+ *frame_count = xmlrpc_array_size(&chamelium->env, res);
+ ret = calloc(sizeof(igt_crc_t), *frame_count);
+
+ for (i = 0; i < *frame_count; i++) {
+ xmlrpc_array_read_item(&chamelium->env, res, i, &elem);
+
+ crc_from_xml(chamelium, elem, &ret[i]);
+ ret[i].frame = i;
+
+ xmlrpc_DECREF(elem);
+ }
+
+ xmlrpc_DECREF(res);
+
+ return ret;
+}
+
+/**
+ * chamelium_port_read_captured_frame:
+ *
+ * @chamelium: The Chamelium instance to use
+ * @index: The index of the captured frame we want to get
+ *
+ * Retrieves a single video frame captured during the last video capture on the
+ * Chamelium. This data should be freed using #chamelium_destroy_frame_data
+ *
+ * Returns: a chamelium_frame_dump struct
+ */
+struct chamelium_frame_dump *chamelium_read_captured_frame(struct chamelium *chamelium,
+ unsigned int index)
+{
+ xmlrpc_value *res;
+ struct chamelium_frame_dump *frame;
+
+ res = chamelium_rpc(chamelium, NULL, "ReadCapturedFrame", "(i)", index);
+ frame = frame_from_xml(chamelium, res);
+ xmlrpc_DECREF(res);
+
+ return frame;
+}
+
+/**
+ * chamelium_get_captured_frame_count:
+ * @chamelium: The Chamelium instance to use
+ *
+ * Gets the number of frames that were captured during the last video capture.
+ *
+ * Returns: the number of frames the Chamelium captured during the last video
+ * capture.
+ */
+int chamelium_get_captured_frame_count(struct chamelium *chamelium)
+{
+ xmlrpc_value *res;
+ int ret;
+
+ res = chamelium_rpc(chamelium, NULL, "GetCapturedFrameCount", "()");
+ xmlrpc_read_int(&chamelium->env, res, &ret);
+
+ xmlrpc_DECREF(res);
+ return ret;
+}
+
+static pixman_image_t *convert_frame_format(pixman_image_t *src,
+ int format)
+{
+ pixman_image_t *converted;
+ int w = pixman_image_get_width(src), h = pixman_image_get_height(src);
+
+ converted = pixman_image_create_bits(format, w, h, NULL,
+ PIXMAN_FORMAT_BPP(format) * w);
+ pixman_image_composite(PIXMAN_OP_ADD, src, NULL, converted,
+ 0, 0, 0, 0, 0, 0, w, h);
+
+ return converted;
+}
+
+/**
+ * chamelium_assert_frame_eq:
+ * @chamelium: The chamelium instance the frame dump belongs to
+ * @dump: The chamelium frame dump to check
+ * @fb: The framebuffer to check against
+ *
+ * Asserts that the image contained in the chamelium frame dump is identical to
+ * the given framebuffer. Useful for scenarios where pre-calculating CRCs might
+ * not be ideal.
+ */
+void chamelium_assert_frame_eq(const struct chamelium *chamelium,
+ const struct chamelium_frame_dump *dump,
+ struct igt_fb *fb)
+{
+ cairo_t *cr;
+ cairo_surface_t *fb_surface;
+ pixman_image_t *reference_src, *reference_bgr;
+ int w = dump->width, h = dump->height;
+ bool eq;
+
+ /* Get the cairo surface for the framebuffer */
+ cr = igt_get_cairo_ctx(chamelium->drm_fd, fb);
+ fb_surface = cairo_get_target(cr);
+ cairo_surface_reference(fb_surface);
+ cairo_destroy(cr);
+
+ /*
+ * Convert the reference image into the same format as the chamelium
+ * image
+ */
+ reference_src = pixman_image_create_bits(
+ PIXMAN_x8r8g8b8, w, h,
+ (void*)cairo_image_surface_get_data(fb_surface),
+ cairo_image_surface_get_stride(fb_surface));
+ reference_bgr = convert_frame_format(reference_src, PIXMAN_b8g8r8);
+ pixman_image_unref(reference_src);
+
+ /* Now do the actual comparison */
+ eq = memcmp(dump->bgr, pixman_image_get_data(reference_bgr),
+ dump->size) == 0;
+
+ pixman_image_unref(reference_bgr);
+ cairo_surface_destroy(fb_surface);
+
+ igt_fail_on_f(!eq,
+ "Chamelium frame dump didn't match reference image\n");
+}
+
+/**
+ * chamelium_get_frame_limit:
+ * @chamelium: The Chamelium instance to use
+ * @port: The port to check the frame limit on
+ * @w: The width of the area to get the capture frame limit for, or %0 for the
+ * whole display
+ * @h: The height of the area to get the capture frame limit for, or %0 for the
+ * whole display
+ *
+ * Gets the max number of frames we can capture with the Chamelium for the given
+ * resolution.
+ *
+ * Returns: The number of the max number of frames we can capture
+ */
+int chamelium_get_frame_limit(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int w, int h)
+{
+ xmlrpc_value *res;
+ int ret;
+
+ if (!w && !h)
+ chamelium_port_get_resolution(chamelium, port, &w, &h);
+
+ res = chamelium_rpc(chamelium, port, "GetMaxFrameLimit", "(iii)",
+ port->id, w, h);
+
+ xmlrpc_read_int(&chamelium->env, res, &ret);
+ xmlrpc_DECREF(res);
+
+ return ret;
+}
+
+static unsigned int chamelium_get_port_type(struct chamelium *chamelium,
+ struct chamelium_port *port)
+{
+ xmlrpc_value *res;
+ const char *port_type_str;
+ unsigned int port_type;
+
+ res = chamelium_rpc(chamelium, NULL, "GetConnectorType",
+ "(i)", port->id);
+
+ xmlrpc_read_string(&chamelium->env, res, &port_type_str);
+ igt_debug("Port %d is of type '%s'\n", port->id, port_type_str);
+
+ if (strcmp(port_type_str, "DP") == 0)
+ port_type = DRM_MODE_CONNECTOR_DisplayPort;
+ else if (strcmp(port_type_str, "HDMI") == 0)
+ port_type = DRM_MODE_CONNECTOR_HDMIA;
+ else if (strcmp(port_type_str, "VGA") == 0)
+ port_type = DRM_MODE_CONNECTOR_VGA;
+ else
+ port_type = DRM_MODE_CONNECTOR_Unknown;
+
+ free((void*)port_type_str);
+ xmlrpc_DECREF(res);
+
+ return port_type;
+}
+
+static bool chamelium_read_port_mappings(struct chamelium *chamelium,
+ int drm_fd, GKeyFile *key_file)
+{
+ drmModeRes *res;
+ drmModeConnector *connector;
+ struct chamelium_port *port;
+ GError *error = NULL;
+ char **group_list;
+ char *group, *map_name;
+ int port_i, i, j;
+ bool ret = true;
+
+ group_list = g_key_file_get_groups(key_file, NULL);
+
+ /* Count how many connector mappings are specified in the config */
+ for (i = 0; group_list[i] != NULL; i++) {
+ if (strstr(group_list[i], "Chamelium:"))
+ chamelium->port_count++;
+ }
+
+ chamelium->ports = calloc(sizeof(struct chamelium_port),
+ chamelium->port_count);
+ port_i = 0;
+ res = drmModeGetResources(drm_fd);
+
+ for (i = 0; group_list[i] != NULL; i++) {
+ group = group_list[i];
+
+ if (!strstr(group, "Chamelium:"))
+ continue;
+
+ map_name = group + (sizeof("Chamelium:") - 1);
+
+ port = &chamelium->ports[port_i++];
+ port->name = strdup(map_name);
+ port->id = g_key_file_get_integer(key_file, group,
+ "ChameliumPortID",
+ &error);
+ if (!port->id) {
+ igt_warn("Failed to read chamelium port ID for %s: %s\n",
+ map_name, error->message);
+ ret = false;
+ goto out;
+ }
+
+ port->type = chamelium_get_port_type(chamelium, port);
+ if (port->type == DRM_MODE_CONNECTOR_Unknown) {
+ igt_warn("Unable to retrieve the physical port type from the Chamelium for '%s'\n",
+ map_name);
+ ret = false;
+ goto out;
+ }
+
+ for (j = 0;
+ j < res->count_connectors && !port->connector_id;
+ j++) {
+ char name[50];
+
+ connector = drmModeGetConnectorCurrent(
+ drm_fd, res->connectors[j]);
+
+ /* We have to generate the connector name on our own */
+ snprintf(name, 50, "%s-%u",
+ kmstest_connector_type_str(connector->connector_type),
+ connector->connector_type_id);
+
+ if (strcmp(name, map_name) == 0)
+ port->connector_id = connector->connector_id;
+
+ drmModeFreeConnector(connector);
+ }
+ if (!port->connector_id) {
+ igt_warn("No connector found with name '%s'\n",
+ map_name);
+ ret = false;
+ goto out;
+ }
+
+ igt_debug("Port '%s' with physical type '%s' mapped to Chamelium port %d\n",
+ map_name, kmstest_connector_type_str(port->type),
+ port->id);
+ }
+
+out:
+ drmModeFreeResources(res);
+ g_strfreev(group_list);
+
+ return ret;
+}
+
+static bool chamelium_read_config(struct chamelium *chamelium, int drm_fd)
+{
+ GKeyFile *key_file = g_key_file_new();
+ GError *error = NULL;
+ char *key_file_loc, *key_file_env;
+ int rc;
+ bool ret = true;
+
+ key_file_env = getenv("IGT_CONFIG_PATH");
+ if (key_file_env) {
+ key_file_loc = key_file_env;
+ } else {
+ key_file_loc = malloc(100);
+ snprintf(key_file_loc, 100, "%s/.igtrc", g_get_home_dir());
+ }
+
+ rc = g_key_file_load_from_file(key_file, key_file_loc,
+ G_KEY_FILE_NONE, &error);
+ if (!rc) {
+ igt_warn("Failed to read chamelium configuration file: %s\n",
+ error->message);
+ ret = false;
+ goto out;
+ }
+
+ chamelium->url = g_key_file_get_string(key_file, "Chamelium", "URL",
+ &error);
+ if (!chamelium->url) {
+ igt_warn("Couldn't read chamelium URL from config file: %s\n",
+ error->message);
+ ret = false;
+ goto out;
+ }
+
+ ret = chamelium_read_port_mappings(chamelium, drm_fd, key_file);
+
+out:
+ g_key_file_free(key_file);
+
+ if (!key_file_env)
+ free(key_file_loc);
+
+ return ret;
+}
+
+/**
+ * chamelium_reset:
+ * @chamelium: The Chamelium instance to use
+ *
+ * Resets the chamelium's IO board. As well, this also has the effect of
+ * causing all of the chamelium ports to get set to unplugged
+ */
+void chamelium_reset(struct chamelium *chamelium)
+{
+ igt_debug("Resetting the chamelium\n");
+ xmlrpc_DECREF(chamelium_rpc(chamelium, NULL, "Reset", "()"));
+}
+
+static void chamelium_exit_handler(int sig)
+{
+ igt_debug("Deinitializing Chamelium\n");
+
+ if (cleanup_instance)
+ chamelium_deinit(cleanup_instance);
+}
+
+/**
+ * chamelium_init:
+ * @chamelium: The Chamelium instance to use
+ * @drm_fd: a display initialized with #igt_display_init
+ *
+ * Sets up a connection with a chamelium, using the URL specified in the
+ * Chamelium configuration. This must be called first before trying to use the
+ * chamelium.
+ *
+ * If we fail to establish a connection with the chamelium, fail to find a
+ * configured connector, etc. we fail the current test.
+ *
+ * Returns: A newly initialized chamelium struct, or NULL on error
+ */
+struct chamelium *chamelium_init(int drm_fd)
+{
+ struct chamelium *chamelium = malloc(sizeof(struct chamelium));
+
+ if (!chamelium)
+ return NULL;
+
+ /* A chamelium instance was set up previously, so clean it up before
+ * starting a new one
+ */
+ if (cleanup_instance)
+ chamelium_deinit(cleanup_instance);
+
+ memset(chamelium, 0, sizeof(*chamelium));
+ chamelium->drm_fd = drm_fd;
+
+ /* Setup the libxmlrpc context */
+ xmlrpc_env_init(&chamelium->env);
+ xmlrpc_client_setup_global_const(&chamelium->env);
+ xmlrpc_client_create(&chamelium->env, XMLRPC_CLIENT_NO_FLAGS, PACKAGE,
+ PACKAGE_VERSION, NULL, 0, &chamelium->client);
+ if (chamelium->env.fault_occurred) {
+ igt_debug("Failed to init xmlrpc: %s\n",
+ chamelium->env.fault_string);
+ goto error;
+ }
+
+ if (!chamelium_read_config(chamelium, drm_fd))
+ goto error;
+
+ chamelium_reset(chamelium);
+
+ cleanup_instance = chamelium;
+ igt_install_exit_handler(chamelium_exit_handler);
+
+ return chamelium;
+
+error:
+ xmlrpc_env_clean(&chamelium->env);
+ free(chamelium);
+
+ return NULL;
+}
+
+/**
+ * chamelium_deinit:
+ * @chamelium: The Chamelium instance to use
+ *
+ * Frees the resources used by a connection to the chamelium that was set up
+ * with #chamelium_init. As well, this function restores the state of the
+ * chamelium like it was before calling #chamelium_init. This function is also
+ * called as an exit handler, so users only need to call manually if they don't
+ * want the chamelium interfering with other tests in the same file.
+ */
+void chamelium_deinit(struct chamelium *chamelium)
+{
+ int i;
+ struct chamelium_edid *pos, *tmp;
+
+ /* We want to make sure we leave all of the ports plugged in, since
+ * testing setups requiring multiple monitors are probably using the
+ * chamelium to provide said monitors
+ */
+ chamelium_reset(chamelium);
+ for (i = 0; i < chamelium->port_count; i++)
+ chamelium_plug(chamelium, &chamelium->ports[i]);
+
+ /* Destroy any EDIDs we created to make sure we don't leak them */
+ igt_list_for_each_safe(pos, tmp, &chamelium->edids->link, link) {
+ chamelium_destroy_edid(chamelium, pos->id);
+ free(pos);
+ }
+
+ xmlrpc_client_destroy(chamelium->client);
+ xmlrpc_env_clean(&chamelium->env);
+
+ for (i = 0; i < chamelium->port_count; i++)
+ free(chamelium->ports[i].name);
+
+ free(chamelium->ports);
+ free(chamelium);
+}
+
+igt_constructor {
+ /* Frame dumps can be large, so we need to be able to handle very large
+ * responses
+ *
+ * Limit here is 10MB
+ */
+ xmlrpc_limit_set(XMLRPC_XML_SIZE_LIMIT_ID, 10485760);
+}
diff --git a/lib/igt_chamelium.h b/lib/igt_chamelium.h
new file mode 100644
index 0000000..f421d83
--- /dev/null
+++ b/lib/igt_chamelium.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright © 2016 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors: Lyude Paul <lyude at redhat.com>
+ */
+
+#ifndef IGT_CHAMELIUM_H
+#define IGT_CHAMELIUM_H
+
+#include "config.h"
+#include "igt.h"
+#include <stdbool.h>
+
+struct chamelium;
+struct chamelium_port;
+struct chamelium_frame_dump;
+
+struct chamelium *chamelium_init(int drm_fd);
+void chamelium_deinit(struct chamelium *chamelium);
+void chamelium_reset(struct chamelium *chamelium);
+
+struct chamelium_port **chamelium_get_ports(struct chamelium *chamelium,
+ int *count);
+unsigned int chamelium_port_get_type(const struct chamelium_port *port);
+drmModeConnector *chamelium_port_get_connector(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool reprobe);
+const char *chamelium_port_get_name(struct chamelium_port *port);
+
+void chamelium_plug(struct chamelium *chamelium, struct chamelium_port *port);
+void chamelium_unplug(struct chamelium *chamelium, struct chamelium_port *port);
+bool chamelium_is_plugged(struct chamelium *chamelium,
+ struct chamelium_port *port);
+bool chamelium_port_wait_video_input_stable(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int timeout_secs);
+void chamelium_fire_mixed_hpd_pulses(struct chamelium *chamelium,
+ struct chamelium_port *port, ...);
+void chamelium_fire_hpd_pulses(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int width_msec, int count);
+void chamelium_async_hpd_pulse_start(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool high, int delay_secs);
+void chamelium_async_hpd_pulse_finish(struct chamelium *chamelium);
+int chamelium_new_edid(struct chamelium *chamelium, const unsigned char *edid);
+void chamelium_port_set_edid(struct chamelium *chamelium,
+ struct chamelium_port *port, int edid_id);
+bool chamelium_port_get_ddc_state(struct chamelium *chamelium,
+ struct chamelium_port *port);
+void chamelium_port_set_ddc_state(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ bool enabled);
+void chamelium_port_get_resolution(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int *x, int *y);
+igt_crc_t *chamelium_get_crc_for_area(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int x, int y, int w, int h);
+void chamelium_start_capture(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int x, int y, int w, int h);
+void chamelium_stop_capture(struct chamelium *chamelium, int frame_count);
+void chamelium_capture(struct chamelium *chamelium, struct chamelium_port *port,
+ int x, int y, int w, int h, int frame_count);
+igt_crc_t *chamelium_read_captured_crcs(struct chamelium *chamelium,
+ int *frame_count);
+struct chamelium_frame_dump *chamelium_read_captured_frame(struct chamelium *chamelium,
+ unsigned int index);
+struct chamelium_frame_dump *chamelium_port_dump_pixels(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int x, int y,
+ int w, int h);
+int chamelium_get_captured_frame_count(struct chamelium *chamelium);
+int chamelium_get_frame_limit(struct chamelium *chamelium,
+ struct chamelium_port *port,
+ int w, int h);
+
+void chamelium_assert_frame_eq(const struct chamelium *chamelium,
+ const struct chamelium_frame_dump *dump,
+ struct igt_fb *fb);
+void chamelium_destroy_frame_dump(struct chamelium_frame_dump *dump);
+
+#endif /* IGT_CHAMELIUM_H */
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 14a41ae..8930c24 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -62,7 +62,7 @@ AM_CFLAGS = $(DRM_CFLAGS) $(CWARNFLAGS) -Wno-unused-result $(DEBUG_CFLAGS)\
$(LIBUNWIND_CFLAGS) $(WERROR_CFLAGS) \
$(NULL)
-LDADD = ../lib/libintel_tools.la $(GLIB_LIBS)
+LDADD = ../lib/libintel_tools.la $(GLIB_LIBS) $(XMLRPC_LIBS)
AM_CFLAGS += $(CAIRO_CFLAGS) $(LIBUDEV_CFLAGS) $(GLIB_CFLAGS)
AM_LDFLAGS = -Wl,--as-needed
@@ -118,5 +118,8 @@ vc4_wait_bo_CFLAGS = $(AM_CFLAGS) $(DRM_VC4_CFLAGS)
vc4_wait_bo_LDADD = $(LDADD) $(DRM_VC4_LIBS)
vc4_wait_seqno_CFLAGS = $(AM_CFLAGS) $(DRM_VC4_CFLAGS)
vc4_wait_seqno_LDADD = $(LDADD) $(DRM_VC4_LIBS)
+
+chamelium_CFLAGS = $(AM_CFLAGS) $(XMLRPC_CFLAGS) $(LIBUDEV_CFLAGS)
+chamelium_LDADD = $(LDADD) $(XMLRPC_LIBS) $(LIBUDEV_LIBS)
endif
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 38385aa..016cd86 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -142,6 +142,7 @@ TESTS_progs_M = \
template \
vgem_basic \
vgem_slow \
+ chamelium \
$(NULL)
TESTS_progs_XM = \
diff --git a/tests/chamelium.c b/tests/chamelium.c
new file mode 100644
index 0000000..d914d5b
--- /dev/null
+++ b/tests/chamelium.c
@@ -0,0 +1,689 @@
+/*
+ * Copyright © 2016 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Lyude Paul <lyude at redhat.com>
+ */
+
+#include "config.h"
+#include "igt.h"
+
+#include <fcntl.h>
+#include <string.h>
+
+typedef struct {
+ struct chamelium *chamelium;
+ struct chamelium_port **ports;
+ int port_count;
+
+ int drm_fd;
+
+ int edid_id;
+ int alt_edid_id;
+} data_t;
+
+#define HOTPLUG_TIMEOUT 20 /* seconds */
+#define SUSPEND_RESUME_DELAY 20 /* seconds */
+
+/* Pre-calculated CRCs for the pattern fb, for all the modes in the default
+ * chamelium edid
+ */
+struct crc_entry {
+ int width;
+ int height;
+ igt_crc_t crc;
+};
+
+#define CRC_ENTRY(w_, h_, ...) \
+ { w_, h_, { .n_words = 4, .crc = { __VA_ARGS__ } } }
+
+static const struct crc_entry pattern_fb_crcs[] = {
+ CRC_ENTRY(1920, 1080, 0xf859, 0xa751, 0x8c81, 0x45a1),
+ CRC_ENTRY(1280, 720, 0xcec2, 0x4246, 0x6cfd, 0xeb43),
+ CRC_ENTRY(1024, 768, 0x85e5, 0xf0cd, 0xafe3, 0x7f18),
+ CRC_ENTRY( 800, 600, 0x6b39, 0x32b6, 0x831a, 0xb03e),
+ CRC_ENTRY( 640, 480, 0xa121, 0x2473, 0xb150, 0x8c47),
+};
+#undef CRC_ENTRY
+
+static const igt_crc_t *
+get_precalculated_crc(struct chamelium_port *port, int w, int h)
+{
+ int i;
+ const struct crc_entry *entry;
+
+ for (i = 0; i < ARRAY_SIZE(pattern_fb_crcs); i++) {
+ entry = &pattern_fb_crcs[i];
+
+ if (entry->width == w && entry->height == h)
+ return &entry->crc;
+ }
+
+ return NULL;
+}
+
+static void
+require_connector_present(data_t *data, unsigned int type)
+{
+ int i;
+ bool found = false;
+
+ for (i = 0; i < data->port_count && !found; i++) {
+ if (chamelium_port_get_type(data->ports[i]) == type)
+ found = true;
+ }
+
+ igt_require_f(found, "No port of type %s was found\n",
+ kmstest_connector_type_str(type));
+}
+
+static drmModeConnection
+reprobe_connector(data_t *data, struct chamelium_port *port)
+{
+ drmModeConnector *connector;
+ drmModeConnection status;
+
+ igt_debug("Reprobing %s...\n", chamelium_port_get_name(port));
+ connector = chamelium_port_get_connector(data->chamelium, port, true);
+ igt_assert(connector);
+ status = connector->connection;
+
+ drmModeFreeConnector(connector);
+ return status;
+}
+
+static void
+wait_for_connector(data_t *data, struct chamelium_port *port,
+ drmModeConnection status)
+{
+ bool finished = false;
+
+ igt_debug("Waiting for %s to %sconnect...\n",
+ chamelium_port_get_name(port),
+ status == DRM_MODE_DISCONNECTED ? "dis" : "");
+
+ /*
+ * Rely on simple reprobing so we don't fail tests that don't require
+ * that hpd events work in the event that hpd doesn't work on the system
+ */
+ igt_until_timeout(HOTPLUG_TIMEOUT) {
+ if (reprobe_connector(data, port) == status) {
+ finished = true;
+ return;
+ }
+
+ sleep(1);
+ }
+
+ igt_assert(finished);
+}
+
+static void
+reset_state(data_t *data, struct chamelium_port *port)
+{
+ chamelium_reset(data->chamelium);
+ wait_for_connector(data, port, DRM_MODE_DISCONNECTED);
+}
+
+static void
+test_basic_hotplug(data_t *data, struct chamelium_port *port)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+ int i;
+
+ reset_state(data, port);
+
+ for (i = 0; i < 15; i++) {
+ igt_flush_hotplugs(mon);
+
+ /* Check if we get a sysfs hotplug event */
+ chamelium_plug(data->chamelium, port);
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+ igt_assert_eq(reprobe_connector(data, port),
+ DRM_MODE_CONNECTED);
+
+ igt_flush_hotplugs(mon);
+
+ /* Now check if we get a hotplug from disconnection */
+ chamelium_unplug(data->chamelium, port);
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+ igt_assert_eq(reprobe_connector(data, port),
+ DRM_MODE_DISCONNECTED);
+
+ /* Sleep so we don't accidentally cause an hpd storm */
+ usleep(500 * 1000);
+ }
+
+ igt_cleanup_hotplug(mon);
+}
+
+static void
+test_edid_read(data_t *data, struct chamelium_port *port,
+ int edid_id, const unsigned char *edid)
+{
+ drmModePropertyBlobPtr edid_blob = NULL;
+ drmModeConnector *connector = chamelium_port_get_connector(
+ data->chamelium, port, false);
+ uint64_t edid_blob_id;
+
+ reset_state(data, port);
+
+ chamelium_port_set_edid(data->chamelium, port, edid_id);
+ chamelium_plug(data->chamelium, port);
+ wait_for_connector(data, port, DRM_MODE_CONNECTED);
+
+ igt_assert(kmstest_get_property(data->drm_fd, connector->connector_id,
+ DRM_MODE_OBJECT_CONNECTOR, "EDID", NULL,
+ &edid_blob_id, NULL));
+ igt_assert(edid_blob = drmModeGetPropertyBlob(data->drm_fd,
+ edid_blob_id));
+
+ igt_assert(memcmp(edid, edid_blob->data, EDID_LENGTH) == 0);
+
+ drmModeFreePropertyBlob(edid_blob);
+ drmModeFreeConnector(connector);
+}
+
+static void
+test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
+ enum igt_suspend_state state,
+ enum igt_suspend_test test)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+
+ reset_state(data, port);
+
+ igt_set_autoresume_delay(SUSPEND_RESUME_DELAY);
+ igt_flush_hotplugs(mon);
+
+ /* Make sure we notice new connectors after resuming */
+ chamelium_async_hpd_pulse_start(data->chamelium, port, false,
+ SUSPEND_RESUME_DELAY / 2);
+ igt_system_suspend_autoresume(state, test);
+ chamelium_async_hpd_pulse_finish(data->chamelium);
+
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+ igt_assert_eq(reprobe_connector(data, port), DRM_MODE_CONNECTED);
+
+ igt_flush_hotplugs(mon);
+
+ /* Now make sure we notice disconnected connectors after resuming */
+ chamelium_async_hpd_pulse_start(data->chamelium, port, true,
+ SUSPEND_RESUME_DELAY / 2);
+ igt_system_suspend_autoresume(state, test);
+ chamelium_async_hpd_pulse_finish(data->chamelium);
+
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+ igt_assert_eq(reprobe_connector(data, port), DRM_MODE_DISCONNECTED);
+
+ igt_cleanup_hotplug(mon);
+}
+
+static void
+test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
+ enum igt_suspend_state state,
+ enum igt_suspend_test test,
+ int edid_id,
+ int alt_edid_id)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+
+ reset_state(data, port);
+
+ /* First plug in the port */
+ chamelium_port_set_edid(data->chamelium, port, edid_id);
+ chamelium_plug(data->chamelium, port);
+ wait_for_connector(data, port, DRM_MODE_CONNECTED);
+
+ igt_flush_hotplugs(mon);
+
+ /*
+ * Change the edid before we suspend. On resume, the machine should
+ * notice the EDID change and fire a hotplug event.
+ */
+ chamelium_port_set_edid(data->chamelium, port, alt_edid_id);
+
+ igt_system_suspend_autoresume(state, test);
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+}
+
+static igt_output_t *
+prepare_output(data_t *data,
+ igt_display_t *display,
+ struct chamelium_port *port)
+{
+ igt_output_t *output;
+ drmModeRes *res;
+ drmModeConnector *connector =
+ chamelium_port_get_connector(data->chamelium, port, false);
+
+ chamelium_reset(data->chamelium);
+
+ igt_assert(res = drmModeGetResources(data->drm_fd));
+ kmstest_unset_all_crtcs(data->drm_fd, res);
+
+ /* The chamelium's default EDID has a lot of resolutions, way more then
+ * we need to test
+ */
+ chamelium_port_set_edid(data->chamelium, port, data->edid_id);
+
+ chamelium_plug(data->chamelium, port);
+ wait_for_connector(data, port, DRM_MODE_CONNECTED);
+
+ igt_display_init(display, data->drm_fd);
+ output = igt_output_from_connector(display, connector);
+
+ igt_assert(kmstest_probe_connector_config(
+ data->drm_fd, connector->connector_id, ~0, &output->config));
+ igt_output_set_pipe(output, output->config.pipe);
+
+ drmModeFreeConnector(connector);
+ drmModeFreeResources(res);
+
+ return output;
+}
+
+static void
+enable_output(data_t *data,
+ struct chamelium_port *port,
+ igt_output_t *output,
+ drmModeModeInfo *mode,
+ struct igt_fb *fb)
+{
+ igt_display_t *display = output->display;
+ igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ drmModeConnector *connector = chamelium_port_get_connector(
+ data->chamelium, port, false);
+
+ igt_assert(primary);
+
+ igt_plane_set_size(primary, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(primary, fb);
+ igt_output_override_mode(output, mode);
+
+ /* Clear any color correction values that might be enabled */
+ igt_pipe_set_degamma_lut(primary->pipe, NULL, 0);
+ igt_pipe_set_gamma_lut(primary->pipe, NULL, 0);
+ igt_pipe_set_ctm_matrix(primary->pipe, NULL, 0);
+
+ kmstest_set_connector_broadcast_rgb(display->drm_fd, connector,
+ BROADCAST_RGB_FULL);
+
+ igt_display_commit(display);
+ chamelium_port_wait_video_input_stable(data->chamelium, port,
+ HOTPLUG_TIMEOUT);
+
+ drmModeFreeConnector(connector);
+}
+
+static void
+disable_output(data_t *data,
+ struct chamelium_port *port,
+ igt_output_t *output)
+{
+ igt_display_t *display = output->display;
+ igt_plane_t *primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_assert(primary);
+
+ /* Disable the display */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit(display);
+}
+
+static void
+test_display_crc_single(data_t *data, struct chamelium_port *port)
+{
+ igt_display_t display;
+ igt_output_t *output;
+ igt_plane_t *primary;
+ igt_crc_t *crc;
+ const igt_crc_t *expected_crc;
+ struct igt_fb fb;
+ drmModeModeInfo *mode;
+ drmModeConnector *connector;
+ int fb_id, i;
+
+ output = prepare_output(data, &display, port);
+ connector = chamelium_port_get_connector(data->chamelium, port, false);
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_assert(primary);
+
+ for (i = 0; i < connector->count_modes; i++) {
+ mode = &connector->modes[i];
+ fb_id = igt_create_color_pattern_fb(data->drm_fd,
+ mode->hdisplay,
+ mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ 0, 0, 0, &fb);
+ igt_assert(fb_id > 0);
+
+ enable_output(data, port, output, mode, &fb);
+
+ expected_crc = get_precalculated_crc(port,
+ mode->hdisplay,
+ mode->vdisplay);
+ if (!expected_crc) {
+ igt_warn("No precalculated CRC found for %dx%d, skipping CRC check\n",
+ mode->hdisplay, mode->vdisplay);
+ goto next;
+ }
+
+ igt_debug("Testing single CRC fetch\n");
+ crc = chamelium_get_crc_for_area(data->chamelium, port,
+ 0, 0, 0, 0);
+ igt_assert_crc_equal(crc, expected_crc);
+ free(crc);
+
+next:
+ disable_output(data, port, output);
+ igt_remove_fb(data->drm_fd, &fb);
+ }
+
+ drmModeFreeConnector(connector);
+ igt_display_fini(&display);
+}
+
+static void
+test_display_crc_multiple(data_t *data, struct chamelium_port *port)
+{
+ igt_display_t display;
+ igt_output_t *output;
+ igt_plane_t *primary;
+ igt_crc_t *crc;
+ const igt_crc_t *expected_crc;
+ struct igt_fb fb;
+ drmModeModeInfo *mode;
+ drmModeConnector *connector;
+ int fb_id, i, j, captured_frame_count;
+
+ output = prepare_output(data, &display, port);
+ connector = chamelium_port_get_connector(data->chamelium, port, false);
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_assert(primary);
+
+ for (i = 0; i < connector->count_modes; i++) {
+ mode = &connector->modes[i];
+ fb_id = igt_create_color_pattern_fb(data->drm_fd,
+ mode->hdisplay,
+ mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ 0, 0, 0, &fb);
+ igt_assert(fb_id > 0);
+
+ enable_output(data, port, output, mode, &fb);
+
+ expected_crc = get_precalculated_crc(port, mode->hdisplay,
+ mode->vdisplay);
+ if (!expected_crc) {
+ igt_warn("No precalculated CRC found for %dx%d, skipping CRC check\n",
+ mode->hdisplay, mode->vdisplay);
+ goto next;
+ }
+
+ /* We want to keep the display running for a little bit, since
+ * there's always the potential the driver isn't able to keep
+ * the display running properly for very long
+ */
+ chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 3);
+ crc = chamelium_read_captured_crcs(data->chamelium,
+ &captured_frame_count);
+
+ igt_debug("Captured %d frames\n", captured_frame_count);
+ for (j = 0; j < captured_frame_count; j++)
+ igt_assert_crc_equal(&crc[j], expected_crc);
+ free(crc);
+
+next:
+ disable_output(data, port, output);
+ igt_remove_fb(data->drm_fd, &fb);
+ }
+
+ drmModeFreeConnector(connector);
+ igt_display_fini(&display);
+}
+
+static void
+test_display_frame_dump(data_t *data, struct chamelium_port *port)
+{
+ igt_display_t display;
+ igt_output_t *output;
+ igt_plane_t *primary;
+ struct igt_fb fb;
+ struct chamelium_frame_dump *frame;
+ drmModeModeInfo *mode;
+ drmModeConnector *connector;
+ int fb_id, i, j;
+
+ output = prepare_output(data, &display, port);
+ connector = chamelium_port_get_connector(data->chamelium, port, false);
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_assert(primary);
+
+ for (i = 0; i < connector->count_modes; i++) {
+ mode = &connector->modes[i];
+ fb_id = igt_create_color_pattern_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ 0, 0, 0, &fb);
+ igt_assert(fb_id > 0);
+
+ enable_output(data, port, output, mode, &fb);
+
+ igt_debug("Reading frame dumps from Chamelium...\n");
+ chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 5);
+ for (j = 0; j < 5; j++) {
+ frame = chamelium_read_captured_frame(
+ data->chamelium, j);
+ chamelium_assert_frame_eq(data->chamelium, frame, &fb);
+ chamelium_destroy_frame_dump(frame);
+ }
+
+ disable_output(data, port, output);
+ igt_remove_fb(data->drm_fd, &fb);
+ }
+
+ drmModeFreeConnector(connector);
+ igt_display_fini(&display);
+}
+
+static void
+test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
+{
+ struct udev_monitor *mon = igt_watch_hotplug();
+
+ reset_state(data, port);
+
+ /* Disable the DDC on the connector and make sure we still get a
+ * hotplug
+ */
+ chamelium_port_set_ddc_state(data->chamelium, port, false);
+ chamelium_plug(data->chamelium, port);
+
+ igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
+ igt_assert_eq(reprobe_connector(data, port), DRM_MODE_CONNECTED);
+
+ igt_cleanup_hotplug(mon);
+}
+
+#define for_each_port(p, port) \
+ for (p = 0, port = data.ports[p]; \
+ p < data.port_count; \
+ p++, port = data.ports[p])
+
+#define connector_subtest(name__, type__) \
+ igt_subtest(name__) \
+ for_each_port(p, port) \
+ if (chamelium_port_get_type(port) == \
+ DRM_MODE_CONNECTOR_ ## type__)
+
+static data_t data;
+
+igt_main
+{
+ struct chamelium_port *port;
+ int edid_id, alt_edid_id, p;
+
+ igt_fixture {
+ igt_skip_on_simulation();
+
+ data.drm_fd = drm_open_driver_master(DRIVER_ANY);
+ data.chamelium = chamelium_init(data.drm_fd);
+ igt_require(data.chamelium);
+
+ data.ports = chamelium_get_ports(data.chamelium,
+ &data.port_count);
+
+ edid_id = chamelium_new_edid(data.chamelium,
+ igt_kms_get_base_edid());
+ alt_edid_id = chamelium_new_edid(data.chamelium,
+ igt_kms_get_alt_edid());
+ data.edid_id = edid_id;
+ data.alt_edid_id = alt_edid_id;
+
+ /* So fbcon doesn't try to reprobe things itself */
+ kmstest_set_vt_graphics_mode();
+ }
+
+ igt_subtest_group {
+ igt_fixture {
+ require_connector_present(
+ &data, DRM_MODE_CONNECTOR_DisplayPort);
+ }
+
+ connector_subtest("dp-hpd", DisplayPort)
+ test_basic_hotplug(&data, port);
+
+ connector_subtest("dp-edid-read", DisplayPort) {
+ test_edid_read(&data, port, edid_id,
+ igt_kms_get_base_edid());
+ test_edid_read(&data, port, alt_edid_id,
+ igt_kms_get_alt_edid());
+ }
+
+ connector_subtest("dp-hpd-after-suspend", DisplayPort)
+ test_suspend_resume_hpd(&data, port,
+ SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE);
+
+ connector_subtest("dp-hpd-after-hibernate", DisplayPort)
+ test_suspend_resume_hpd(&data, port,
+ SUSPEND_STATE_DISK,
+ SUSPEND_TEST_DEVICES);
+
+ connector_subtest("dp-edid-change-during-suspend", DisplayPort)
+ test_suspend_resume_edid_change(&data, port,
+ SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE,
+ edid_id, alt_edid_id);
+
+ connector_subtest("dp-edid-change-during-hibernate", DisplayPort)
+ test_suspend_resume_edid_change(&data, port,
+ SUSPEND_STATE_DISK,
+ SUSPEND_TEST_DEVICES,
+ edid_id, alt_edid_id);
+
+ connector_subtest("dp-crc-single", DisplayPort)
+ test_display_crc_single(&data, port);
+
+ connector_subtest("dp-crc-multiple", DisplayPort)
+ test_display_crc_multiple(&data, port);
+
+ connector_subtest("dp-frame-dump", DisplayPort)
+ test_display_frame_dump(&data, port);
+ }
+
+ igt_subtest_group {
+ igt_fixture {
+ require_connector_present(
+ &data, DRM_MODE_CONNECTOR_HDMIA);
+ }
+
+ connector_subtest("hdmi-hpd", HDMIA)
+ test_basic_hotplug(&data, port);
+
+ connector_subtest("hdmi-edid-read", HDMIA) {
+ test_edid_read(&data, port, edid_id,
+ igt_kms_get_base_edid());
+ test_edid_read(&data, port, alt_edid_id,
+ igt_kms_get_alt_edid());
+ }
+
+ connector_subtest("hdmi-hpd-after-suspend", HDMIA)
+ test_suspend_resume_hpd(&data, port,
+ SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE);
+
+ connector_subtest("hdmi-hpd-after-hibernate", HDMIA)
+ test_suspend_resume_hpd(&data, port,
+ SUSPEND_STATE_DISK,
+ SUSPEND_TEST_DEVICES);
+
+ connector_subtest("hdmi-edid-change-during-suspend", HDMIA)
+ test_suspend_resume_edid_change(&data, port,
+ SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE,
+ edid_id, alt_edid_id);
+
+ connector_subtest("hdmi-edid-change-during-hibernate", HDMIA)
+ test_suspend_resume_edid_change(&data, port,
+ SUSPEND_STATE_DISK,
+ SUSPEND_TEST_DEVICES,
+ edid_id, alt_edid_id);
+
+ connector_subtest("hdmi-crc-single", HDMIA)
+ test_display_crc_single(&data, port);
+
+ connector_subtest("hdmi-crc-multiple", HDMIA)
+ test_display_crc_multiple(&data, port);
+
+ connector_subtest("hdmi-frame-dump", HDMIA)
+ test_display_frame_dump(&data, port);
+ }
+
+ igt_subtest_group {
+ igt_fixture {
+ require_connector_present(
+ &data, DRM_MODE_CONNECTOR_VGA);
+ }
+
+ connector_subtest("vga-hpd", VGA)
+ test_basic_hotplug(&data, port);
+
+ connector_subtest("vga-edid-read", VGA) {
+ test_edid_read(&data, port, edid_id,
+ igt_kms_get_base_edid());
+ test_edid_read(&data, port, alt_edid_id,
+ igt_kms_get_alt_edid());
+ }
+
+ /* FIXME: Right now there isn't a way to do any sort of delayed
+ * psuedo-hotplug with VGA, so testing detection after a
+ * suspend/resume cycle isn't possible yet
+ */
+
+ connector_subtest("vga-hpd-without-ddc", VGA)
+ test_hpd_without_ddc(&data, port);
+ }
+}
--
2.9.3
More information about the Intel-gfx
mailing list