[Intel-gfx] [PATCH i-g-t v2 03/33] lib/igt_kms: Rename kmstest properties nplanes and plane

[Mika Kahola]

Reviewed-by: Mika Kahola <mika.kahola at intel.com>

On Tue, 2017-01-24 at 18:33 -0500, Robert Foss wrote:
> Rename these properties to have them use the same naming convention
> as the igt_*_t structs.
> 
> Signed-off-by: Robert Foss <robert.foss at collabora.com>
> ---
>  lib/igt_kms.c            | 16 +++++++++-------
>  lib/igt_kms.h            |  4 ++--
>  tests/kms_plane_lowres.c | 10 +++++-----
>  3 files changed, 16 insertions(+), 14 deletions(-)
> 
> diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> index 922bba63..8fa40c28 100644
> --- a/lib/igt_kms.c
> +++ b/lib/igt_kms.c
> @@ -1310,11 +1310,13 @@ void kmstest_get_crtc(enum pipe pipe, struct
> kmstest_crtc *crtc)
>  				crtc->active = true;
>  				parse_crtc(tmp, crtc);
>  
> -				crtc->nplanes = parse_planes(fid,
> NULL);
> -				crtc->plane = calloc(crtc->nplanes,
> sizeof(*crtc->plane));
> +				crtc->n_planes = parse_planes(fid,
> NULL);
> +				crtc->planes = calloc(crtc-
> >n_planes, sizeof(*crtc->planes));
> +				igt_assert_f(crtc->planes, "Failed
> to allocate memory for %d planes\n", crtc->n_planes);
> +
>  				fseek(fid, 0, SEEK_END);
>  				fseek(fid, 0, SEEK_SET);
> -				parse_planes(fid, crtc->plane);
> +				parse_planes(fid, crtc->planes);
>  
>  				if (crtc->pipe != pipe)
>  					crtc = NULL;
> @@ -1340,14 +1342,14 @@ void igt_assert_plane_visible(enum pipe pipe,
> bool visibility)
>  	kmstest_get_crtc(pipe, &crtc);
>  
>  	visible = true;
> -	for (i = 0; i < crtc.nplanes; i++) {
> -		if (crtc.plane[i].type == DRM_PLANE_TYPE_PRIMARY)
> +	for (i = 0; i < crtc.n_planes; i++) {
> +		if (crtc.planes[i].type == DRM_PLANE_TYPE_PRIMARY)
>  			continue;
>  
> -		if (crtc.plane[i].pos_x > crtc.width) {
> +		if (crtc.planes[i].pos_x > crtc.width) {
>  			visible = false;
>  			break;
> -		} else if (crtc.plane[i].pos_y > crtc.height) {
> +		} else if (crtc.planes[i].pos_y > crtc.height) {
>  			visible = false;
>  			break;
>  		}
> diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> index 5eb49ab3..3bc69b84 100644
> --- a/lib/igt_kms.h
> +++ b/lib/igt_kms.h
> @@ -149,8 +149,8 @@ struct kmstest_crtc {
>  	bool active;
>  	int width;
>  	int height;
> -	int nplanes;
> -	struct kmstest_plane *plane;
> +	int n_planes;
> +	struct kmstest_plane *planes;
>  };
>  
>  /**
> diff --git a/tests/kms_plane_lowres.c b/tests/kms_plane_lowres.c
> index 858cc482..424ecb97 100644
> --- a/tests/kms_plane_lowres.c
> +++ b/tests/kms_plane_lowres.c
> @@ -181,11 +181,11 @@ test_setup(data_t *data, enum pipe pipe,
> uint64_t modifier, int flags,
>  	igt_output_set_pipe(output, pipe);
>  
>  	kmstest_get_crtc(pipe, &crtc);
> -	igt_skip_on(crtc.nplanes > data-
> >display.pipes[pipe].n_planes);
> -	igt_skip_on(crtc.nplanes == 0);
> +	igt_skip_on(crtc.n_planes > data-
> >display.pipes[pipe].n_planes);
> +	igt_skip_on(crtc.n_planes == 0);
>  
> -	for (i = 0; i < crtc.nplanes; i++)
> -		data->plane[i] = igt_output_get_plane(output,
> crtc.plane[i].index);
> +	for (i = 0; i < crtc.n_planes; i++)
> +		data->plane[i] = igt_output_get_plane(output,
> crtc.planes[i].index);
>  
>  	mode = igt_output_get_mode(output);
>  
> @@ -198,7 +198,7 @@ test_setup(data_t *data, enum pipe pipe, uint64_t
> modifier, int flags,
>  	igt_plane_set_fb(data->plane[0], &data->fb[0]);
>  
>  	/* yellow sprite plane in lower left corner */
> -	for (i = IGT_PLANE_2; i < crtc.nplanes; i++) {
> +	for (i = IGT_PLANE_2; i < crtc.n_planes; i++) {
>  		if (data->plane[i]->is_cursor)
>  			size = 64;
>  		else
-- 
Mika Kahola - Intel OTC