[Intel-gfx] [PATCH 03/15] drm/kms-core: Use recommened kerneldoc for struct member refs
Eric Engestrom
eric.engestrom at imgtec.com
Wed Jan 25 13:52:41 UTC 2017
On Wednesday, 2017-01-25 07:26:45 +0100, Daniel Vetter wrote:
> I just learned that &struct_name.member_name works and looks pretty
> even. It doesn't (yet) link to the member directly though, which would
> be really good for big structures or vfunc tables (where the
> per-member kerneldoc tends to be long).
>
> Also some minor drive-by polish where it makes sense, I read a lot
> of docs ...
>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Chris Wilson <chris at chris-wilson.co.uk>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 71 ++++++++++++++++++-------------------
> drivers/gpu/drm/drm_blend.c | 11 +++---
> drivers/gpu/drm/drm_connector.c | 12 +++----
> drivers/gpu/drm/drm_crtc.c | 7 ++--
> drivers/gpu/drm/drm_dumb_buffers.c | 4 +--
> drivers/gpu/drm/drm_encoder.c | 2 +-
> drivers/gpu/drm/drm_encoder_slave.c | 2 +-
> drivers/gpu/drm/drm_framebuffer.c | 10 +++---
> drivers/gpu/drm/drm_modeset_lock.c | 10 +++---
> drivers/gpu/drm/drm_plane.c | 2 +-
> drivers/gpu/drm/drm_property.c | 2 +-
> include/drm/drm_atomic.h | 6 ++--
> include/drm/drm_color_mgmt.h | 2 +-
> include/drm/drm_connector.h | 40 ++++++++++-----------
> include/drm/drm_crtc.h | 29 +++++++--------
> include/drm/drm_framebuffer.h | 15 ++++----
> include/drm/drm_mode_config.h | 12 +++----
> include/drm/drm_mode_object.h | 13 ++++---
> include/drm/drm_modeset_lock.h | 2 +-
> include/drm/drm_plane.h | 18 +++++-----
> include/drm/drm_property.h | 8 ++---
> 21 files changed, 141 insertions(+), 137 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 723392fc98c8..96c81a61a542 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -195,8 +195,8 @@ EXPORT_SYMBOL(drm_atomic_state_default_clear);
> * all locks. So someone else could sneak in and change the current modeset
> * configuration. Which means that all the state assembled in @state is no
> * longer an atomic update to the current state, but to some arbitrary earlier
> - * state. Which could break assumptions the driver's ->atomic_check likely
> - * relies on.
> + * state. Which could break assumptions the driver's
> + * &drm_mode_config_funcs.atomic_check likely relies on.
> *
> * Hence we must clear all cached state and completely start over, using this
> * function.
> @@ -456,11 +456,10 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc,
> * @property: the property to set
> * @val: the new property value
> *
> - * Use this instead of calling crtc->atomic_set_property directly.
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_set_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_crtc_funcs.atomic_set_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -532,10 +531,10 @@ EXPORT_SYMBOL(drm_atomic_crtc_set_property);
> * @property: the property to set
> * @val: return location for the property value
> *
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_get_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_crtc_funcs.atomic_get_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -716,11 +715,10 @@ EXPORT_SYMBOL(drm_atomic_get_plane_state);
> * @property: the property to set
> * @val: the new property value
> *
> - * Use this instead of calling plane->atomic_set_property directly.
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_set_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_plane_funcs.atomic_set_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -791,10 +789,10 @@ EXPORT_SYMBOL(drm_atomic_plane_set_property);
> * @property: the property to set
> * @val: return location for the property value
> *
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_get_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_plane_funcs.atomic_get_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -1057,11 +1055,10 @@ EXPORT_SYMBOL(drm_atomic_get_connector_state);
> * @property: the property to set
> * @val: the new property value
> *
> - * Use this instead of calling connector->atomic_set_property directly.
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_set_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_connector_funcs.atomic_set_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -1136,10 +1133,10 @@ static void drm_atomic_connector_print_state(struct drm_printer *p,
> * @property: the property to set
> * @val: return location for the property value
> *
> - * This function handles generic/core properties and calls out to
> - * driver's ->atomic_get_property() for driver properties. To ensure
> - * consistent behavior you must call this function rather than the
> - * driver hook directly.
> + * This function handles generic/core properties and calls out to driver's
> + * &drm_connector_funcs.atomic_get_property for driver properties. To ensure
> + * consistent behavior you must call this function rather than the driver hook
> + * directly.
> *
> * RETURNS:
> * Zero on success, error code on failure
> @@ -1316,8 +1313,8 @@ EXPORT_SYMBOL(drm_atomic_set_fb_for_plane);
> * all drope the reference to the fence as we not storing it
The sentence above could be rewritten as:
"It will drop all reference to the fence as we are not storing it
anywhere."
> * anywhere.
> *
> - * Otherwise, if plane_state->fence is not set this function we
> - * just set it with the received implict fence.
> + * Otherwise, if &drm_plane_state.fence is not set this function we just set it
> + * with the received implict fence.
"implicit"
> */
> void
> drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state,
> @@ -1616,7 +1613,7 @@ int drm_atomic_commit(struct drm_atomic_state *state)
> EXPORT_SYMBOL(drm_atomic_commit);
>
> /**
> - * drm_atomic_nonblocking_commit - atomic&nonblocking configuration commit
> + * drm_atomic_nonblocking_commit - atomic nonblocking commit
> * @state: atomic configuration to check
> *
> * Note that this function can return -EDEADLK if the driver needed to acquire
> @@ -1829,10 +1826,10 @@ static int atomic_set_prop(struct drm_atomic_state *state,
> * @plane_mask: plane mask for planes that were updated.
> * @ret: return value, can be -EDEADLK for a retry.
> *
> - * Before doing an update plane->old_fb is set to plane->fb,
> - * but before dropping the locks old_fb needs to be set to NULL
> - * and plane->fb updated. This is a common operation for each
> - * atomic update, so this call is split off as a helper.
> + * Before doing an update &drm_plane.old_fb is set to &drm_plane.fb, but before
> + * dropping the locks old_fb needs to be set to NULL and plane->fb updated. This
> + * is a common operation for each atomic update, so this call is split off as a
> + * helper.
> */
> void drm_atomic_clean_old_fb(struct drm_device *dev,
> unsigned plane_mask,
> @@ -1873,7 +1870,7 @@ EXPORT_SYMBOL(drm_atomic_clean_old_fb);
> * As a contrast, with implicit fencing the kernel keeps track of any
> * ongoing rendering, and automatically ensures that the atomic update waits
> * for any pending rendering to complete. For shared buffers represented with
> - * a &struct dma_buf this is tracked in &reservation_object structures.
> + * a &struct dma_buf this is tracked in &struct reservation_object.
> * Implicit syncing is how Linux traditionally worked (e.g. DRI2/3 on X.org),
> * whereas explicit fencing is what Android wants.
> *
> diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
> index 1f2412c7ccfd..665aafc6ad68 100644
> --- a/drivers/gpu/drm/drm_blend.c
> +++ b/drivers/gpu/drm/drm_blend.c
> @@ -40,9 +40,8 @@
> * sub-pixel accuracy, which is scaled up to a pixel-aligned destination
> * rectangle in the visible area of a &drm_crtc. The visible area of a CRTC is
> * defined by the horizontal and vertical visible pixels (stored in @hdisplay
> - * and @vdisplay) of the requested mode (stored in @mode in the
> - * &drm_crtc_state). These two rectangles are both stored in the
> - * &drm_plane_state.
> + * and @vdisplay) of the requested mode (stored in &drm_crtc_state.mode). These
> + * two rectangles are both stored in the &drm_plane_state.
> *
> * For the atomic ioctl the following standard (atomic) properties on the plane object
> * encode the basic plane composition model:
> @@ -215,7 +214,7 @@ EXPORT_SYMBOL(drm_rotation_simplify);
> * for it in drm core. Drivers can then attach this property to planes to enable
> * support for configurable planes arrangement during blending operation.
> * Once mutable zpos property has been enabled, the DRM core will automatically
> - * calculate drm_plane_state->normalized_zpos values. Usually min should be set
> + * calculate &drm_plane_state.normalized_zpos values. Usually min should be set
> * to 0 and max to maximal number of planes for given crtc - 1.
> *
> * If zpos of some planes cannot be changed (like fixed background or
> @@ -367,8 +366,8 @@ static int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc,
> * For every CRTC this function checks new states of all planes assigned to
> * it and calculates normalized zpos value for these planes. Planes are compared
> * first by their zpos values, then by plane id (if zpos is equal). The plane
> - * with lowest zpos value is at the bottom. The plane_state->normalized_zpos is
> - * then filled with unique values from 0 to number of active planes in crtc
> + * with lowest zpos value is at the bottom. The &drm_plane_state.normalized_zpos
> + * is then filled with unique values from 0 to number of active planes in crtc
> * minus one.
> *
> * RETURNS
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 799edd0d308e..dd720d4cb4f7 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -38,8 +38,8 @@
> * Hence they are reference-counted using drm_connector_reference() and
> * drm_connector_unreference().
> *
> - * KMS driver must create, initialize, register and attach at a struct
> - * &drm_connector for each such sink. The instance is created as other KMS
> + * KMS driver must create, initialize, register and attach at a &struct
> + * drm_connector for each such sink. The instance is created as other KMS
> * objects and initialized by setting the following fields.
> *
> * The connector is then registered with a call to drm_connector_init() with a
> @@ -49,7 +49,7 @@
> * Connectors must be attached to an encoder to be used. For devices that map
> * connectors to encoders 1:1, the connector should be attached at
> * initialization time with a call to drm_mode_connector_attach_encoder(). The
> - * driver must also set the &struct drm_connector encoder field to point to the
> + * driver must also set the &drm_connector.encoder field to point to the
> * attached encoder.
> *
> * For connectors which are not fixed (like built-in panels) the driver needs to
> @@ -497,7 +497,7 @@ static struct lockdep_map connector_list_iter_dep_map = {
> * @dev: DRM device
> * @iter: connector_list iterator
> *
> - * Sets @iter up to walk the connector list in &drm_mode_config of @dev. @iter
> + * Sets @iter up to walk the &drm_mode_config.connector_list of @dev. @iter
> * must always be cleaned up again by calling drm_connector_list_iter_put().
> * Iteration itself happens using drm_connector_list_iter_next() or
> * drm_for_each_connector_iter().
> @@ -696,8 +696,8 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
> * drivers this is only provided for backwards compatibility with existing
> * drivers, it remaps to controlling the "ACTIVE" property on the CRTC the
> * connector is linked to. Drivers should never set this property directly,
> - * it is handled by the DRM core by calling the ->dpms() callback in
> - * &drm_connector_funcs. Atomic drivers should implement this hook using
> + * it is handled by the DRM core by calling the &drm_connector_funcs.dpms
> + * callback. Atomic drivers should implement this hook using
> * drm_atomic_helper_connector_dpms(). This is the only property standard
> * connector property that userspace can change.
> * PATH:
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index bd3c8b243447..cea7a7efa43c 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -415,11 +415,12 @@ int drm_mode_getcrtc(struct drm_device *dev,
> }
>
> /**
> - * drm_mode_set_config_internal - helper to call ->set_config
> + * drm_mode_set_config_internal - helper to call &drm_mode_config_funcs.set_config
> * @set: modeset config to set
> *
> - * This is a little helper to wrap internal calls to the ->set_config driver
> - * interface. The only thing it adds is correct refcounting dance.
> + * This is a little helper to wrap internal calls to the
> + * &drm_mode_config_funcs.set_config driver interface. The only thing it adds is
> + * correct refcounting dance.
> *
> * Returns:
> * Zero on success, negative errno on failure.
> diff --git a/drivers/gpu/drm/drm_dumb_buffers.c b/drivers/gpu/drm/drm_dumb_buffers.c
> index e5c61cda4ae3..10307cc16d75 100644
> --- a/drivers/gpu/drm/drm_dumb_buffers.c
> +++ b/drivers/gpu/drm/drm_dumb_buffers.c
> @@ -42,8 +42,8 @@
> * create dumb buffers suitable for scanout, which can then be used to create
> * KMS frame buffers.
> *
> - * To support dumb objects drivers must implement the dumb_create,
> - * dumb_destroy and dumb_map_offset operations from &struct drm_driver. See
> + * To support dumb objects drivers must implement the &drm_driver.dumb_create,
> + * &drm_driver.dumb_destroy and &drm_driver.dumb_map_offset operations. See
> * there for further details.
> *
> * Note that dumb objects may not be used for gpu acceleration, as has been
> diff --git a/drivers/gpu/drm/drm_encoder.c b/drivers/gpu/drm/drm_encoder.c
> index 487cfe3989e8..129450713bb7 100644
> --- a/drivers/gpu/drm/drm_encoder.c
> +++ b/drivers/gpu/drm/drm_encoder.c
> @@ -98,7 +98,7 @@ void drm_encoder_unregister_all(struct drm_device *dev)
> *
> * Initialises a preallocated encoder. Encoder should be subclassed as part of
> * driver encoder objects. At driver unload time drm_encoder_cleanup() should be
> - * called from the driver's destroy hook in &drm_encoder_funcs.
> + * called from the driver's &drm_encoder_funcs.destroy hook.
> *
> * Returns:
> * Zero on success, error code on failure.
> diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c
> index 4484785cd9ac..cf804389f5ec 100644
> --- a/drivers/gpu/drm/drm_encoder_slave.c
> +++ b/drivers/gpu/drm/drm_encoder_slave.c
> @@ -43,7 +43,7 @@
> * &drm_encoder_slave. The @slave_funcs field will be initialized with
> * the hooks provided by the slave driver.
> *
> - * If @info->platform_data is non-NULL it will be used as the initial
> + * If @info.platform_data is non-NULL it will be used as the initial
> * slave config.
> *
> * Returns 0 on success or a negative errno on failure, in particular,
> diff --git a/drivers/gpu/drm/drm_framebuffer.c b/drivers/gpu/drm/drm_framebuffer.c
> index 588ccc3a2218..ca9cff09cad1 100644
> --- a/drivers/gpu/drm/drm_framebuffer.c
> +++ b/drivers/gpu/drm/drm_framebuffer.c
> @@ -58,8 +58,8 @@
> * fbdev framebuffer when the struct &struct drm_framebuffer is embedded into
> * the fbdev helper struct) drivers can manually clean up a framebuffer at
> * module unload time with drm_framebuffer_unregister_private(). But doing this
> - * is not recommended, and it's better to have a normal free-standing struct
> - * &drm_framebuffer.
> + * is not recommended, and it's better to have a normal free-standing &struct
> + * drm_framebuffer.
> */
>
> int drm_framebuffer_check_src_coords(uint32_t src_x, uint32_t src_y,
> @@ -470,7 +470,7 @@ int drm_mode_getfb(struct drm_device *dev,
> * usb display-link, mipi manual update panels or edp panel self refresh modes.
> *
> * Modesetting drivers which always update the frontbuffer do not need to
> - * implement the corresponding ->dirty framebuffer callback.
> + * implement the corresponding &drm_framebuffer_funcs.dirty callback.
> *
> * Called by the user via ioctl.
> *
> @@ -709,8 +709,8 @@ EXPORT_SYMBOL(drm_framebuffer_unregister_private);
> * @fb: framebuffer to remove
> *
> * Cleanup framebuffer. This function is intended to be used from the drivers
> - * ->destroy callback. It can also be used to clean up driver private
> - * framebuffers embedded into a larger structure.
> + * &drm_framebuffer_funcs.destroy callback. It can also be used to clean up
> + * driver private framebuffers embedded into a larger structure.
> *
> * Note that this function does not remove the fb from active usuage - if it is
"usage"
> * still used anywhere, hilarity can ensue since userspace could call getfb on
> diff --git a/drivers/gpu/drm/drm_modeset_lock.c b/drivers/gpu/drm/drm_modeset_lock.c
> index 3551ae31f143..bf60f2645e55 100644
> --- a/drivers/gpu/drm/drm_modeset_lock.c
> +++ b/drivers/gpu/drm/drm_modeset_lock.c
> @@ -33,7 +33,7 @@
> * to use &ww_mutex and acquire-contexts to avoid deadlocks. But because
> * the locking is more distributed around the driver code, we want a bit
> * of extra utility/tracking out of our acquire-ctx. This is provided
> - * by drm_modeset_lock / drm_modeset_acquire_ctx.
> + * by &struct drm_modeset_lock and &struct drm_modeset_acquire_ctx.
> *
> * For basic principles of &ww_mutex, see: Documentation/locking/ww-mutex-design.txt
> *
> @@ -53,7 +53,7 @@
> * drm_modeset_acquire_fini(&ctx);
> *
> * On top of of these per-object locks using &ww_mutex there's also an overall
> - * dev->mode_config.lock, for protecting everything else. Mostly this means
> + * &drm_mode_config.mutex, for protecting everything else. Mostly this means
> * probe state of connectors, and preventing hotplug add/removal of connectors.
> *
> * Finally there's a bunch of dedicated locks to protect drm core internal
> @@ -71,7 +71,7 @@ static DEFINE_WW_CLASS(crtc_ww_class);
> * drm_modeset_unlock_all() function.
> *
> * This function is deprecated. It allocates a lock acquisition context and
> - * stores it in the DRM device's ->mode_config. This facilitate conversion of
> + * stores it in &drm_device.mode_config. This facilitate conversion of
> * existing code because it removes the need to manually deal with the
> * acquisition context, but it is also brittle because the context is global
> * and care must be taken not to nest calls. New code should use the
> @@ -124,7 +124,7 @@ EXPORT_SYMBOL(drm_modeset_lock_all);
> * drm_modeset_lock_all() function.
> *
> * This function is deprecated. It uses the lock acquisition context stored
> - * in the DRM device's ->mode_config. This facilitates conversion of existing
> + * in &drm_device.mode_config. This facilitates conversion of existing
> * code because it removes the need to manually deal with the acquisition
> * context, but it is also brittle because the context is global and care must
> * be taken not to nest calls. New code should pass the acquisition context
> @@ -468,7 +468,7 @@ EXPORT_SYMBOL(drm_modeset_unlock);
> * This function takes all modeset locks, suitable where a more fine-grained
> * scheme isn't (yet) implemented.
> *
> - * Unlike drm_modeset_lock_all(), it doesn't take the dev->mode_config.mutex
> + * Unlike drm_modeset_lock_all(), it doesn't take the &drm_mode_config.mutex
> * since that lock isn't required for modeset state changes. Callers which
> * need to grab that lock too need to do so outside of the acquire context
> * @ctx.
> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c
> index eed66be18329..c464fc4a874d 100644
> --- a/drivers/gpu/drm/drm_plane.c
> +++ b/drivers/gpu/drm/drm_plane.c
> @@ -42,7 +42,7 @@
> *
> * Cursor and overlay planes are optional. All drivers should provide one
> * primary plane per CRTC to avoid surprising userspace too much. See enum
> - * &drm_plane_type for a more in-depth discussion of these special uapi-relevant
> + * drm_plane_type for a more in-depth discussion of these special uapi-relevant
> * plane types. Special planes are associated with their CRTC by calling
> * drm_crtc_init_with_planes().
> *
> diff --git a/drivers/gpu/drm/drm_property.c b/drivers/gpu/drm/drm_property.c
> index 0d0e5dc0ee23..0cb2a39fe059 100644
> --- a/drivers/gpu/drm/drm_property.c
> +++ b/drivers/gpu/drm/drm_property.c
> @@ -43,7 +43,7 @@
> *
> * Property values are only 64bit. To support bigger piles of data (like gamma
> * tables, color correction matrizes or large structures) a property can instead
"matrices"
> - * point at a &drm_property_blob with that additional data
> + * point at a &drm_property_blob with that additional data.
> *
> * Properties are defined by their symbolic name, userspace must keep a
> * per-object mapping from those names to the property ID used in the atomic
> diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
> index f1cb2b08afb5..052ab161b239 100644
> --- a/include/drm/drm_atomic.h
> +++ b/include/drm/drm_atomic.h
> @@ -123,7 +123,8 @@ struct drm_crtc_commit {
> /**
> * @commit_entry:
> *
> - * Entry on the per-CRTC commit_list. Protected by crtc->commit_lock.
> + * Entry on the per-CRTC &drm_crtc.commit_list. Protected by
> + * $drm_crtc.commit_lock.
> */
> struct list_head commit_entry;
>
> @@ -429,7 +430,8 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
> *
> * For example if the CRTC mode has changed, and the hardware is able to enact
> * the requested mode change without going through a full modeset, the driver
> - * should clear mode_changed during its ->atomic_check.
> + * should clear mode_changed in its &drm_mode_config_funcs.atomic_check
> + * implementation.
> */
> static inline bool
> drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
> diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
> index c767238ac9d5..d9c2f680f5ae 100644
> --- a/include/drm/drm_color_mgmt.h
> +++ b/include/drm/drm_color_mgmt.h
> @@ -34,7 +34,7 @@ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
> int gamma_size);
>
> /**
> - * drm_color_lut_extract - clamp&round LUT entries
> + * drm_color_lut_extract - clamp and round LUT entries
> * @user_input: input value
> * @bit_precision: number of bits the hw LUT supports
> *
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index d489cc003b7e..4f7d3b49995a 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -331,15 +331,15 @@ struct drm_connector_funcs {
> *
> * Entry point for output detection and basic mode validation. The
> * driver should reprobe the output if needed (e.g. when hotplug
> - * handling is unreliable), add all detected modes to connector->modes
> + * handling is unreliable), add all detected modes to &drm_connector.modes
> * and filter out any the device can't support in any configuration. It
> * also needs to filter out any modes wider or higher than the
> * parameters max_width and max_height indicate.
> *
> * The drivers must also prune any modes no longer valid from
> - * connector->modes. Furthermore it must update connector->status and
> - * connector->edid. If no EDID has been received for this output
> - * connector->edid must be NULL.
> + * &drm_connector.modes. Furthermore it must update
> + * &drm_connector.status and &drm_connector.edid. If no EDID has been
> + * received for this output connector->edid must be NULL.
> *
> * Drivers using the probe helpers should use
> * drm_helper_probe_single_connector_modes() or
> @@ -348,7 +348,7 @@ struct drm_connector_funcs {
> *
> * RETURNS:
> *
> - * The number of modes detected and filled into connector->modes.
> + * The number of modes detected and filled into &drm_connector.modes.
> */
> int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
>
> @@ -381,7 +381,7 @@ struct drm_connector_funcs {
> * core drm connector interfaces. Everything added from this callback
> * should be unregistered in the early_unregister callback.
> *
> - * This is called while holding drm_connector->mutex.
> + * This is called while holding &drm_connector.mutex.
> *
> * Returns:
> *
> @@ -398,7 +398,7 @@ struct drm_connector_funcs {
> * early in the driver unload sequence to disable userspace access
> * before data structures are torndown.
> *
> - * This is called while holding drm_connector->mutex.
> + * This is called while holding &drm_connector.mutex.
> */
> void (*early_unregister)(struct drm_connector *connector);
>
> @@ -418,9 +418,9 @@ struct drm_connector_funcs {
> * Duplicate the current atomic state for this connector and return it.
> * The core and helpers guarantee that any atomic state duplicated with
> * this hook and still owned by the caller (i.e. not transferred to the
> - * driver by calling ->atomic_commit() from struct
> - * &drm_mode_config_funcs) will be cleaned up by calling the
> - * @atomic_destroy_state hook in this structure.
> + * driver by calling &drm_mode_config_funcs.atomic_commit) will be
> + * cleaned up by calling the @atomic_destroy_state hook in this
> + * structure.
> *
> * Atomic drivers which don't subclass &struct drm_connector_state should use
> * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
> @@ -428,7 +428,7 @@ struct drm_connector_funcs {
> * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
> * duplicated in a consistent fashion across drivers.
> *
> - * It is an error to call this hook before connector->state has been
> + * It is an error to call this hook before &drm_connector.state has been
> * initialized correctly.
> *
> * NOTE:
> @@ -609,8 +609,8 @@ struct drm_connector {
>
> /**
> * @mutex: Lock for general connector state, but currently only protects
> - * @registered. Most of the connector state is still protected by the
> - * mutex in &drm_mode_config.
> + * @registered. Most of the connector state is still protected by
> + * &drm_mode_config.mutex.
> */
> struct mutex mutex;
>
> @@ -636,14 +636,14 @@ struct drm_connector {
> /**
> * @modes:
> * Modes available on this connector (from fill_modes() + user).
> - * Protected by dev->mode_config.mutex.
> + * Protected by &drm_mode_config.mutex.
> */
> - struct list_head modes; /* list of modes on this connector */
> + struct list_head modes;
>
> /**
> * @status:
> * One of the drm_connector_status enums (connected, not, or unknown).
> - * Protected by dev->mode_config.mutex.
> + * Protected by &drm_mode_config.mutex.
> */
> enum drm_connector_status status;
>
> @@ -651,7 +651,7 @@ struct drm_connector {
> * @probed_modes:
> * These are modes added by probing with DDC or the BIOS, before
> * filtering is applied. Used by the probe helpers.Protected by
space before "Protected"
> - * dev->mode_config.mutex.
> + * &drm_mode_config.mutex.
> */
> struct list_head probed_modes;
>
> @@ -659,10 +659,10 @@ struct drm_connector {
> * @display_info: Display information is filled from EDID information
> * when a display is detected. For non hot-pluggable displays such as
> * flat panels in embedded systems, the driver should initialize the
> - * display_info.width_mm and display_info.height_mm fields with the
> - * physical size of the display.
> + * &drm_display_info.width_mm and &drm_display_info.height_mm fields
> + * with the physical size of the display.
> *
> - * Protected by dev->mode_config.mutex.
> + * Protected by &drm_mode_config.mutex.
> */
> struct drm_display_info display_info;
> const struct drm_connector_funcs *funcs;
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 06c943d1e04c..496324d3416b 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -81,8 +81,8 @@ struct drm_plane_helper_funcs;
> * @enable: whether the CRTC should be enabled, gates all other state
> * @active: whether the CRTC is actively displaying (used for DPMS)
> * @planes_changed: planes on this crtc are updated
> - * @mode_changed: crtc_state->mode or crtc_state->enable has been changed
> - * @active_changed: crtc_state->active has been toggled.
> + * @mode_changed: @mode or @enable has been changed
> + * @active_changed: @active has been toggled.
> * @connectors_changed: connectors to this crtc have been updated
> * @zpos_changed: zpos values of planes on this crtc have been updated
> * @color_mgmt_changed: color management properties have changed (degamma or
> @@ -102,9 +102,10 @@ struct drm_plane_helper_funcs;
> *
> * Note that the distinction between @enable and @active is rather subtile:
> * Flipping @active while @enable is set without changing anything else may
> - * never return in a failure from the ->atomic_check callback. Userspace assumes
> - * that a DPMS On will always succeed. In other words: @enable controls resource
> - * assignment, @active controls the actual hardware state.
> + * never return in a failure from the &drm_mode_config_funcs.atomic_check
> + * callback. Userspace assumes that a DPMS On will always succeed. In other
> + * words: @enable controls resource assignment, @active controls the actual
> + * hardware state.
> *
> * The three booleans active_changed, connectors_changed and mode_changed are
> * intended to indicate whether a full modeset is needed, rather than strictly
> @@ -346,8 +347,8 @@ struct drm_crtc_funcs {
> * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
> * requests a page flip the DRM core verifies that the new frame buffer
> * is large enough to be scanned out by the CRTC in the currently
> - * configured mode and then calls the CRTC ->page_flip() operation with a
> - * pointer to the new frame buffer.
> + * configured mode and then calls this hook with a pointer to the new
> + * frame buffer.
> *
> * The driver must wait for any pending rendering to the new framebuffer
> * to complete before executing the flip. It should also wait for any
> @@ -382,7 +383,7 @@ struct drm_crtc_funcs {
> * RETURNS:
> *
> * 0 on success or a negative error code on failure. Note that if a
> - * ->page_flip() operation is already pending the callback should return
> + * page flip operation is already pending the callback should return
> * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
> * or just runtime disabled through DPMS respectively the new atomic
> * "ACTIVE" state) should result in an -EINVAL error code. Note that
> @@ -436,17 +437,17 @@ struct drm_crtc_funcs {
> * Duplicate the current atomic state for this CRTC and return it.
> * The core and helpers gurantee that any atomic state duplicated with
"guarantee"
> * this hook and still owned by the caller (i.e. not transferred to the
> - * driver by calling ->atomic_commit() from struct
> - * &drm_mode_config_funcs) will be cleaned up by calling the
> - * @atomic_destroy_state hook in this structure.
> + * driver by calling &drm_mode_config_funcs.atomic_commit) will be
> + * cleaned up by calling the @atomic_destroy_state hook in this
> + * structure.
> *
> - * Atomic drivers which don't subclass &struct drm_crtc should use
> + * Atomic drivers which don't subclass &struct drm_crtc_state should use
> * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
> * state structure to extend it with driver-private state should use
> * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
> * duplicated in a consistent fashion across drivers.
> *
> - * It is an error to call this hook before crtc->state has been
> + * It is an error to call this hook before &drm_crtc.state has been
> * initialized correctly.
> *
> * NOTE:
> @@ -641,7 +642,7 @@ struct drm_crtc {
> * This provides a read lock for the overall crtc state (mode, dpms
> * state, ...) and a write lock for everything which can be update
> * without a full modeset (fb, cursor data, crtc properties ...). Full
> - * modeset also need to grab dev->mode_config.connection_mutex.
> + * modeset also need to grab &drm_mode_config.connection_mutex.
> */
> struct drm_modeset_lock mutex;
>
> diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h
> index 046c35e54099..04c77eee9c20 100644
> --- a/include/drm/drm_framebuffer.h
> +++ b/include/drm/drm_framebuffer.h
> @@ -40,8 +40,8 @@ struct drm_framebuffer_funcs {
> *
> * Clean up framebuffer resources, specifically also unreference the
> * backing storage. The core guarantees to call this function for every
> - * framebuffer successfully created by ->fb_create() in
> - * &drm_mode_config_funcs. Drivers must also call
> + * framebuffer successfully created by calling
> + * &drm_mode_config_funcs.fb_create. Drivers must also call
> * drm_framebuffer_cleanup() to release DRM core resources for this
> * framebuffer.
> */
> @@ -112,8 +112,8 @@ struct drm_framebuffer {
> */
> struct drm_device *dev;
> /**
> - * @head: Place on the dev->mode_config.fb_list, access protected by
> - * dev->mode_config.fb_lock.
> + * @head: Place on the &drm_mode_config.fb_list, access protected by
> + * &drm_mode_config.fb_lock.
> */
> struct list_head head;
>
> @@ -187,8 +187,7 @@ struct drm_framebuffer {
> */
> int hot_y;
> /**
> - * @filp_head: Placed on &struct drm_file fbs list_head, protected by
> - * fbs_lock in the same structure.
> + * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock.
> */
> struct list_head filp_head;
> };
> @@ -260,8 +259,8 @@ static inline void drm_framebuffer_assign(struct drm_framebuffer **p,
> * @fb: the loop cursor
> * @dev: the DRM device
> *
> - * Iterate over all framebuffers of @dev. User must hold the fb_lock from
> - * &drm_mode_config.
> + * Iterate over all framebuffers of @dev. User must hold
> + * &drm_mode_config.fb_lock.
> */
> #define drm_for_each_fb(fb, dev) \
> for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)), \
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> index fe230f161efc..26ff46ab26fb 100644
> --- a/include/drm/drm_mode_config.h
> +++ b/include/drm/drm_mode_config.h
> @@ -132,8 +132,8 @@ struct drm_mode_config_funcs {
> * that before calling this hook.
> *
> * See the documentation of @atomic_commit for an exhaustive list of
> - * error conditions which don't have to be checked at the
> - * ->atomic_check() stage?
> + * error conditions which don't have to be checked at the in this
> + * callback.
> *
> * See the documentation for &struct drm_atomic_state for how exactly
> * an atomic modeset update is described.
> @@ -198,10 +198,10 @@ struct drm_mode_config_funcs {
> * completed. These events are per-CRTC and can be distinguished by the
> * CRTC index supplied in &drm_event to userspace.
> *
> - * The drm core will supply a &struct drm_event in the event
> - * member of each CRTC's &drm_crtc_state structure. See the
> - * documentation for &drm_crtc_state for more details about the precise
> - * semantics of this event.
> + * The drm core will supply a &struct drm_event in each CRTC's
> + * &drm_crtc_state.event. See the documentation for
> + * &drm_crtc_state.event for more details about the precise semantics of
> + * this event.
> *
> * NOTE:
> *
> diff --git a/include/drm/drm_mode_object.h b/include/drm/drm_mode_object.h
> index 43460b21d112..2c017adf6d74 100644
> --- a/include/drm/drm_mode_object.h
> +++ b/include/drm/drm_mode_object.h
> @@ -86,10 +86,15 @@ struct drm_object_properties {
> *
> * Note that atomic drivers do not store mutable properties in this
> * array, but only the decoded values in the corresponding state
> - * structure. The decoding is done using the ->atomic_get_property and
> - * ->atomic_set_property hooks of the corresponding object. Hence atomic
> - * drivers should not use drm_object_property_set_value() and
> - * drm_object_property_get_value() on mutable objects, i.e. those
> + * structure. The decoding is done using the &drm_crtc.atomic_get_property and
> + * &drm_crtc.atomic_set_property hooks for &struct drm_crtc. For
> + * &struct drm_plane the hooks are &drm_plane_funcs.atomic_get_property and
> + * &drm_plane_funcs.atomic_set_property. And for &struct drm_connector
> + * the hooks are &drm_connector_funcs.atomic_get_property and
> + * &drm_connector_funcs.atomic_set_property .
> + *
> + * Hence atomic drivers should not use drm_object_property_set_value()
> + * and drm_object_property_get_value() on mutable objects, i.e. those
> * without the DRM_MODE_PROP_IMMUTABLE flag set.
> */
> uint64_t values[DRM_OBJECT_MAX_PROPERTY];
> diff --git a/include/drm/drm_modeset_lock.h b/include/drm/drm_modeset_lock.h
> index d918ce45ec2c..96d39fbd12ca 100644
> --- a/include/drm/drm_modeset_lock.h
> +++ b/include/drm/drm_modeset_lock.h
> @@ -64,7 +64,7 @@ struct drm_modeset_acquire_ctx {
> /**
> * struct drm_modeset_lock - used for locking modeset resources.
> * @mutex: resource locking
> - * @head: used to hold it's place on state->locked list when
> + * @head: used to hold it's place on &drm_atomi_state.locked list when
"its", "drm_atomic_state"
> * part of an atomic update
> *
> * Used for locking CRTCs and other modeset resources.
> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
> index e049bc52fb07..525a3340c1b2 100644
> --- a/include/drm/drm_plane.h
> +++ b/include/drm/drm_plane.h
> @@ -249,9 +249,9 @@ struct drm_plane_funcs {
> * Duplicate the current atomic state for this plane and return it.
> * The core and helpers gurantee that any atomic state duplicated with
"guarantee"
> * this hook and still owned by the caller (i.e. not transferred to the
> - * driver by calling ->atomic_commit() from struct
> - * &drm_mode_config_funcs) will be cleaned up by calling the
> - * @atomic_destroy_state hook in this structure.
> + * driver by calling &drm_mode_config_funcs.atomic_commit) will be
> + * cleaned up by calling the @atomic_destroy_state hook in this
> + * structure.
> *
> * Atomic drivers which don't subclass &struct drm_plane_state should use
> * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
> @@ -259,7 +259,7 @@ struct drm_plane_funcs {
> * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
> * duplicated in a consistent fashion across drivers.
> *
> - * It is an error to call this hook before plane->state has been
> + * It is an error to call this hook before &drm_plane.state has been
> * initialized correctly.
> *
> * NOTE:
> @@ -423,8 +423,8 @@ enum drm_plane_type {
> *
> * Primary planes represent a "main" plane for a CRTC. Primary planes
> * are the planes operated upon by CRTC modesetting and flipping
> - * operations described in the page_flip and set_config hooks in struct
> - * &drm_crtc_funcs.
> + * operations described in the &drm_crtc_funcs.page_flip and
> + * &drm_crtc_funcs.set_config hooks.
> */
> DRM_PLANE_TYPE_PRIMARY,
>
> @@ -470,8 +470,8 @@ struct drm_plane {
> /**
> * @mutex:
> *
> - * Protects modeset plane state, together with the mutex of &drm_crtc
> - * this plane is linked to (when active, getting actived or getting
> + * Protects modeset plane state, together with the &drm_crtc.mutex of
> + * CRTC this plane is linked to (when active, getting actived or getting
"activated"
> * disabled).
> */
> struct drm_modeset_lock mutex;
> @@ -580,7 +580,7 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
> *
> * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
> * This is useful for implementing userspace apis when userspace is not
> - * universal plane aware. See also enum &drm_plane_type.
> + * universal plane aware. See also &enum drm_plane_type.
> */
> #define drm_for_each_legacy_plane(plane, dev) \
> list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
> diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h
> index 43c4b6a2046d..f66fdb47551c 100644
> --- a/include/drm/drm_property.h
> +++ b/include/drm/drm_property.h
> @@ -30,7 +30,7 @@
> /**
> * struct drm_property_enum - symbolic values for enumerations
> * @value: numeric property value for this enum entry
> - * @head: list of enum values, linked to enum_list in &drm_property
> + * @head: list of enum values, linked to &drm_property.enum_list
> * @name: symbolic name for the enum
> *
> * For enumeration and bitmask properties this structure stores the symbolic
> @@ -191,9 +191,9 @@ struct drm_property {
> * struct drm_property_blob - Blob data for &drm_property
> * @base: base KMS object
> * @dev: DRM device
> - * @head_global: entry on the global blob list in &drm_mode_config
> - * property_blob_list.
> - * @head_file: entry on the per-file blob list in &drm_file blobs list.
> + * @head_global: entry on the global blob list in
> + * &drm_mode_config.property_blob_list.
> + * @head_file: entry on the per-file blob list in &drm_file.blobs list.
> * @length: size of the blob in bytes, invariant over the lifetime of the object
> * @data: actual data, embedded at the end of this structure
> *
> --
> 2.11.0
>
More information about the Intel-gfx
mailing list