[Intel-gfx] [PATCH v5 1/5] drm/i915: setup bridge for HDMI LPE audio driver
Daniel Vetter
daniel at ffwll.ch
Thu Jan 26 09:21:47 UTC 2017
On Tue, Jan 24, 2017 at 03:25:14PM +0200, Jani Nikula wrote:
> On Wed, 25 Jan 2017, Jerome Anand <jerome.anand at intel.com> wrote:
> > Enable support for HDMI LPE audio mode on Baytrail and
> > Cherrytrail when HDaudio controller is not detected
> >
> > Setup minimum required resources during i915_driver_load:
> > 1. Create a platform device to share MMIO/IRQ resources
> > 2. Make the platform device child of i915 device for runtime PM.
> > 3. Create IRQ chip to forward HDMI LPE audio irqs.
> >
> > HDMI LPE audio driver (a standalone sound driver) probes the
> > LPE audio device and creates a new sound card.
> >
> > Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> > Signed-off-by: Jerome Anand <jerome.anand at intel.com>
>
> Acked-by: Jani Nikula <jani.nikula at intel.com>
>
> > ---
> > Documentation/gpu/i915.rst | 9 +
> > drivers/gpu/drm/i915/Makefile | 3 +
> > drivers/gpu/drm/i915/i915_drv.c | 4 +-
> > drivers/gpu/drm/i915/i915_drv.h | 11 ++
> > drivers/gpu/drm/i915/i915_irq.c | 16 ++
> > drivers/gpu/drm/i915/i915_reg.h | 3 +
> > drivers/gpu/drm/i915/intel_audio.c | 25 +++
> > drivers/gpu/drm/i915/intel_drv.h | 2 +
> > drivers/gpu/drm/i915/intel_lpe_audio.c | 321 +++++++++++++++++++++++++++++++++
> > include/drm/intel_lpe_audio.h | 46 +++++
> > 10 files changed, 438 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/gpu/drm/i915/intel_lpe_audio.c
> > create mode 100644 include/drm/intel_lpe_audio.h
> >
> > diff --git a/Documentation/gpu/i915.rst b/Documentation/gpu/i915.rst
> > index 104296d..bd9b767 100644
> > --- a/Documentation/gpu/i915.rst
> > +++ b/Documentation/gpu/i915.rst
> > @@ -225,6 +225,15 @@ Display PLLs
> > .. kernel-doc:: drivers/gpu/drm/i915/intel_dpll_mgr.h
> > :internal:
> >
> > +intel hdmi lpe audio support
> > +----------------------------
> > +
> > +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c
> > + :doc: LPE Audio integration for HDMI or DP playback
> > +
> > +.. kernel-doc:: drivers/gpu/drm/i915/intel_lpe_audio.c
> > + :internal:
> > +
Please apply a follow-up patch to move this next to the chapter about hda
audio, because that makes imo more sense than just semi-randomly adding it
at the end of the chapter. And it would avoid a silly conflict with stuff
in drm-intel.git, which indeed should be here.
Thanks, Daniel
> > Memory Management and Command Submission
> > ========================================
> >
> > diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> > index 74ca2e8..c62ab45 100644
> > --- a/drivers/gpu/drm/i915/Makefile
> > +++ b/drivers/gpu/drm/i915/Makefile
> > @@ -129,6 +129,9 @@ i915-y += intel_gvt.o
> > include $(src)/gvt/Makefile
> > endif
> >
> > +# LPE Audio for VLV and CHT
> > +i915-y += intel_lpe_audio.o
> > +
> > obj-$(CONFIG_DRM_I915) += i915.o
> >
> > CFLAGS_i915_trace_points.o := -I$(src)
> > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> > index ca168b2..2e0574c 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.c
> > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > @@ -1140,7 +1140,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
> > if (IS_GEN5(dev_priv))
> > intel_gpu_ips_init(dev_priv);
> >
> > - i915_audio_component_init(dev_priv);
> > + intel_audio_init(dev_priv);
> >
> > /*
> > * Some ports require correctly set-up hpd registers for detection to
> > @@ -1158,7 +1158,7 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
> > */
> > static void i915_driver_unregister(struct drm_i915_private *dev_priv)
> > {
> > - i915_audio_component_cleanup(dev_priv);
> > + intel_audio_deinit(dev_priv);
> >
> > intel_gpu_ips_teardown();
> > acpi_video_unregister();
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 2446280..8b68f900 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -2454,6 +2454,12 @@ struct drm_i915_private {
> > /* Used to save the pipe-to-encoder mapping for audio */
> > struct intel_encoder *av_enc_map[I915_MAX_PIPES];
> >
> > + /* necessary resource sharing with HDMI LPE audio driver. */
> > + struct {
> > + struct platform_device *platdev;
> > + int irq;
> > + } lpe_audio;
> > +
> > /*
> > * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> > * will be rejected. Instead look for a better place.
> > @@ -3592,6 +3598,11 @@ extern int i915_restore_state(struct drm_i915_private *dev_priv);
> > void i915_setup_sysfs(struct drm_i915_private *dev_priv);
> > void i915_teardown_sysfs(struct drm_i915_private *dev_priv);
> >
> > +/* intel_lpe_audio.c */
> > +int intel_lpe_audio_init(struct drm_i915_private *dev_priv);
> > +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv);
> > +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv);
> > +
> > /* intel_i2c.c */
> > extern int intel_setup_gmbus(struct drm_i915_private *dev_priv);
> > extern void intel_teardown_gmbus(struct drm_i915_private *dev_priv);
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index 6fefc34..47d6131 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -1926,6 +1926,10 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
> > * signalled in iir */
> > valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);
> >
> > + if (iir & (I915_LPE_PIPE_A_INTERRUPT |
> > + I915_LPE_PIPE_B_INTERRUPT))
> > + intel_lpe_audio_irq_handler(dev_priv);
> > +
> > /*
> > * VLV_IIR is single buffered, and reflects the level
> > * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.
> > @@ -2006,6 +2010,11 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg)
> > * signalled in iir */
> > valleyview_pipestat_irq_ack(dev_priv, iir, pipe_stats);
> >
> > + if (iir & (I915_LPE_PIPE_A_INTERRUPT |
> > + I915_LPE_PIPE_B_INTERRUPT |
> > + I915_LPE_PIPE_C_INTERRUPT))
> > + intel_lpe_audio_irq_handler(dev_priv);
> > +
> > /*
> > * VLV_IIR is single buffered, and reflects the level
> > * from PIPESTAT/PORT_HOTPLUG_STAT, hence clear it last.
> > @@ -2948,6 +2957,7 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)
> > u32 pipestat_mask;
> > u32 enable_mask;
> > enum pipe pipe;
> > + u32 val;
> >
> > pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV |
> > PIPE_CRC_DONE_INTERRUPT_STATUS;
> > @@ -2964,6 +2974,12 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv)
> >
> > WARN_ON(dev_priv->irq_mask != ~0);
> >
> > + val = (I915_LPE_PIPE_A_INTERRUPT |
> > + I915_LPE_PIPE_B_INTERRUPT |
> > + I915_LPE_PIPE_C_INTERRUPT);
> > +
> > + enable_mask |= val;
> > +
> > dev_priv->irq_mask = ~enable_mask;
> >
> > GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask);
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 72f9f36..672cb10 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -2428,6 +2428,9 @@ enum skl_disp_power_wells {
> > #define I915_ASLE_INTERRUPT (1<<0)
> > #define I915_BSD_USER_INTERRUPT (1<<25)
> >
> > +#define I915_HDMI_LPE_AUDIO_BASE (VLV_DISPLAY_BASE + 0x65000)
> > +#define I915_HDMI_LPE_AUDIO_SIZE 0x1000
> > +
> > #define GEN6_BSD_RNCID _MMIO(0x12198)
> >
> > #define GEN7_FF_THREAD_MODE _MMIO(0x20a0)
> > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > index 16c2027..103159d 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -956,3 +956,28 @@ void i915_audio_component_cleanup(struct drm_i915_private *dev_priv)
> > component_del(dev_priv->drm.dev, &i915_audio_component_bind_ops);
> > dev_priv->audio_component_registered = false;
> > }
> > +
> > +/**
> > + * intel_audio_init() - Initialize the audio driver either using
> > + * component framework or using lpe audio bridge
> > + * @dev_priv: the i915 drm device private data
> > + *
> > + */
> > +void intel_audio_init(struct drm_i915_private *dev_priv)
> > +{
> > + if (intel_lpe_audio_init(dev_priv) < 0)
> > + i915_audio_component_init(dev_priv);
> > +}
> > +
> > +/**
> > + * intel_audio_deinit() - deinitialize the audio driver
> > + * @dev_priv: the i915 drm device private data
> > + *
> > + */
> > +void intel_audio_deinit(struct drm_i915_private *dev_priv)
> > +{
> > + if ((dev_priv)->lpe_audio.platdev != NULL)
> > + intel_lpe_audio_teardown(dev_priv);
> > + else
> > + i915_audio_component_cleanup(dev_priv);
> > +}
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 0cec001..f162881 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1225,6 +1225,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> > void intel_audio_codec_disable(struct intel_encoder *encoder);
> > void i915_audio_component_init(struct drm_i915_private *dev_priv);
> > void i915_audio_component_cleanup(struct drm_i915_private *dev_priv);
> > +void intel_audio_init(struct drm_i915_private *dev_priv);
> > +void intel_audio_deinit(struct drm_i915_private *dev_priv);
> >
> > /* intel_display.c */
> > enum transcoder intel_crtc_pch_transcoder(struct intel_crtc *crtc);
> > diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > new file mode 100644
> > index 0000000..7ce1b5b
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
> > @@ -0,0 +1,321 @@
> > +/*
> > + * Copyright © 2016 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Authors:
> > + * Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> > + * Jerome Anand <jerome.anand at intel.com>
> > + * based on VED patches
> > + *
> > + */
> > +
> > +/**
> > + * DOC: LPE Audio integration for HDMI or DP playback
> > + *
> > + * Motivation:
> > + * Atom platforms (e.g. valleyview and cherryTrail) integrates a DMA-based
> > + * interface as an alternative to the traditional HDaudio path. While this
> > + * mode is unrelated to the LPE aka SST audio engine, the documentation refers
> > + * to this mode as LPE so we keep this notation for the sake of consistency.
> > + *
> > + * The interface is handled by a separate standalone driver maintained in the
> > + * ALSA subsystem for simplicity. To minimize the interaction between the two
> > + * subsystems, a bridge is setup between the hdmi-lpe-audio and i915:
> > + * 1. Create a platform device to share MMIO/IRQ resources
> > + * 2. Make the platform device child of i915 device for runtime PM.
> > + * 3. Create IRQ chip to forward the LPE audio irqs.
> > + * the hdmi-lpe-audio driver probes the lpe audio device and creates a new
> > + * sound card
> > + *
> > + * Threats:
> > + * Due to the restriction in Linux platform device model, user need manually
> > + * uninstall the hdmi-lpe-audio driver before uninstalling i915 module,
> > + * otherwise we might run into use-after-free issues after i915 removes the
> > + * platform device: even though hdmi-lpe-audio driver is released, the modules
> > + * is still in "installed" status.
> > + *
> > + * Implementation:
> > + * The MMIO/REG platform resources are created according to the registers
> > + * specification.
> > + * When forwarding LPE audio irqs, the flow control handler selection depends
> > + * on the platform, for example on valleyview handle_simple_irq is enough.
> > + *
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/device.h>
> > +#include <linux/pci.h>
> > +
> > +#include "i915_drv.h"
> > +#include <linux/delay.h>
> > +#include <drm/intel_lpe_audio.h>
> > +
> > +#define HAS_LPE_AUDIO(dev_priv) ((dev_priv)->lpe_audio.platdev != NULL)
> > +
> > +static struct platform_device *
> > +lpe_audio_platdev_create(struct drm_i915_private *dev_priv)
> > +{
> > + int ret;
> > + struct drm_device *dev = &dev_priv->drm;
> > + struct platform_device_info pinfo = {};
> > + struct resource *rsc;
> > + struct platform_device *platdev;
> > + struct intel_hdmi_lpe_audio_pdata *pdata;
> > +
> > + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> > + if (!pdata)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + rsc = kcalloc(2, sizeof(*rsc), GFP_KERNEL);
> > + if (!rsc) {
> > + kfree(pdata);
> > + return ERR_PTR(-ENOMEM);
> > + }
> > +
> > + rsc[0].start = rsc[0].end = dev_priv->lpe_audio.irq;
> > + rsc[0].flags = IORESOURCE_IRQ;
> > + rsc[0].name = "hdmi-lpe-audio-irq";
> > +
> > + rsc[1].start = pci_resource_start(dev->pdev, 0) +
> > + I915_HDMI_LPE_AUDIO_BASE;
> > + rsc[1].end = pci_resource_start(dev->pdev, 0) +
> > + I915_HDMI_LPE_AUDIO_BASE + I915_HDMI_LPE_AUDIO_SIZE - 1;
> > + rsc[1].flags = IORESOURCE_MEM;
> > + rsc[1].name = "hdmi-lpe-audio-mmio";
> > +
> > + pinfo.parent = dev->dev;
> > + pinfo.name = "hdmi-lpe-audio";
> > + pinfo.id = -1;
> > + pinfo.res = rsc;
> > + pinfo.num_res = 2;
> > + pinfo.data = pdata;
> > + pinfo.size_data = sizeof(*pdata);
> > + pinfo.dma_mask = DMA_BIT_MASK(32);
> > +
> > + spin_lock_init(&pdata->lpe_audio_slock);
> > +
> > + platdev = platform_device_register_full(&pinfo);
> > + if (IS_ERR(platdev)) {
> > + ret = PTR_ERR(platdev);
> > + DRM_ERROR("Failed to allocate LPE audio platform device\n");
> > + goto err;
> > + }
> > +
> > + kfree(rsc);
> > +
> > + return platdev;
> > +
> > +err:
> > + kfree(rsc);
> > + kfree(pdata);
> > + return ERR_PTR(ret);
> > +}
> > +
> > +static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv)
> > +{
> > + platform_device_unregister(dev_priv->lpe_audio.platdev);
> > + kfree(dev_priv->lpe_audio.platdev->dev.dma_mask);
> > +}
> > +
> > +static void lpe_audio_irq_unmask(struct irq_data *d)
> > +{
> > + struct drm_i915_private *dev_priv = d->chip_data;
> > + unsigned long irqflags;
> > + u32 val = (I915_LPE_PIPE_A_INTERRUPT |
> > + I915_LPE_PIPE_B_INTERRUPT);
> > +
> > + if (IS_CHERRYVIEW(dev_priv))
> > + val |= I915_LPE_PIPE_C_INTERRUPT;
> > +
> > + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> > +
> > + dev_priv->irq_mask &= ~val;
> > + I915_WRITE(VLV_IIR, val);
> > + I915_WRITE(VLV_IIR, val);
> > + I915_WRITE(VLV_IMR, dev_priv->irq_mask);
> > + POSTING_READ(VLV_IMR);
> > +
> > + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> > +}
> > +
> > +static void lpe_audio_irq_mask(struct irq_data *d)
> > +{
> > + struct drm_i915_private *dev_priv = d->chip_data;
> > + unsigned long irqflags;
> > + u32 val = (I915_LPE_PIPE_A_INTERRUPT |
> > + I915_LPE_PIPE_B_INTERRUPT);
> > +
> > + if (IS_CHERRYVIEW(dev_priv))
> > + val |= I915_LPE_PIPE_C_INTERRUPT;
> > +
> > + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> > +
> > + dev_priv->irq_mask |= val;
> > + I915_WRITE(VLV_IMR, dev_priv->irq_mask);
> > + I915_WRITE(VLV_IIR, val);
> > + I915_WRITE(VLV_IIR, val);
> > + POSTING_READ(VLV_IIR);
> > +
> > + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> > +}
> > +
> > +static struct irq_chip lpe_audio_irqchip = {
> > + .name = "hdmi_lpe_audio_irqchip",
> > + .irq_mask = lpe_audio_irq_mask,
> > + .irq_unmask = lpe_audio_irq_unmask,
> > +};
> > +
> > +static int lpe_audio_irq_init(struct drm_i915_private *dev_priv)
> > +{
> > + int irq = dev_priv->lpe_audio.irq;
> > +
> > + WARN_ON(!intel_irqs_enabled(dev_priv));
> > + irq_set_chip_and_handler_name(irq,
> > + &lpe_audio_irqchip,
> > + handle_simple_irq,
> > + "hdmi_lpe_audio_irq_handler");
> > +
> > + return irq_set_chip_data(irq, dev_priv);
> > +}
> > +
> > +static bool lpe_audio_detect(struct drm_i915_private *dev_priv)
> > +{
> > + int lpe_present = false;
> > +
> > + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
> > + static const struct pci_device_id atom_hdaudio_ids[] = {
> > + /* Baytrail */
> > + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0f04)},
> > + /* Braswell */
> > + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2284)},
> > + {}
> > + };
> > +
> > + if (!pci_dev_present(atom_hdaudio_ids)) {
> > + DRM_INFO("%s\n", "HDaudio controller not detected, using LPE audio instead\n");
> > + lpe_present = true;
> > + }
> > + }
> > + return lpe_present;
> > +}
> > +
> > +static int lpe_audio_setup(struct drm_i915_private *dev_priv)
> > +{
> > + int ret;
> > +
> > + dev_priv->lpe_audio.irq = irq_alloc_desc(0);
> > + if (dev_priv->lpe_audio.irq < 0) {
> > + DRM_ERROR("Failed to allocate IRQ desc: %d\n",
> > + dev_priv->lpe_audio.irq);
> > + ret = dev_priv->lpe_audio.irq;
> > + goto err;
> > + }
> > +
> > + DRM_DEBUG("irq = %d\n", dev_priv->lpe_audio.irq);
> > +
> > + ret = lpe_audio_irq_init(dev_priv);
> > +
> > + if (ret) {
> > + DRM_ERROR("Failed to initialize irqchip for lpe audio: %d\n",
> > + ret);
> > + goto err_free_irq;
> > + }
> > +
> > + dev_priv->lpe_audio.platdev = lpe_audio_platdev_create(dev_priv);
> > +
> > + if (IS_ERR(dev_priv->lpe_audio.platdev)) {
> > + ret = PTR_ERR(dev_priv->lpe_audio.platdev);
> > + DRM_ERROR("Failed to create lpe audio platform device: %d\n",
> > + ret);
> > + goto err_free_irq;
> > + }
> > +
> > + return 0;
> > +err_free_irq:
> > + irq_free_desc(dev_priv->lpe_audio.irq);
> > +err:
> > + dev_priv->lpe_audio.irq = -1;
> > + dev_priv->lpe_audio.platdev = NULL;
> > + return ret;
> > +}
> > +
> > +/**
> > + * intel_lpe_audio_irq_handler() - forwards the LPE audio irq
> > + * @dev_priv: the i915 drm device private data
> > + *
> > + * the LPE Audio irq is forwarded to the irq handler registered by LPE audio
> > + * driver.
> > + */
> > +void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv)
> > +{
> > + int ret;
> > +
> > + if (!HAS_LPE_AUDIO(dev_priv))
> > + return;
> > +
> > + ret = generic_handle_irq(dev_priv->lpe_audio.irq);
> > + if (ret)
> > + DRM_ERROR_RATELIMITED("error handling LPE audio irq: %d\n",
> > + ret);
> > +}
> > +
> > +/**
> > + * intel_lpe_audio_init() - detect and setup the bridge between HDMI LPE Audio
> > + * driver and i915
> > + * @dev_priv: the i915 drm device private data
> > + *
> > + * Return: 0 if successful. non-zero if detection or
> > + * llocation/initialization fails
> > + */
> > +int intel_lpe_audio_init(struct drm_i915_private *dev_priv)
> > +{
> > + int ret = -ENODEV;
> > +
> > + if (lpe_audio_detect(dev_priv)) {
> > + ret = lpe_audio_setup(dev_priv);
> > + if (ret < 0)
> > + DRM_ERROR("failed to setup LPE Audio bridge\n");
> > + }
> > + return ret;
> > +}
> > +
> > +/**
> > + * intel_lpe_audio_teardown() - destroy the bridge between HDMI LPE
> > + * audio driver and i915
> > + * @dev_priv: the i915 drm device private data
> > + *
> > + * release all the resources for LPE audio <-> i915 bridge.
> > + */
> > +void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv)
> > +{
> > + struct irq_desc *desc;
> > +
> > + if (!HAS_LPE_AUDIO(dev_priv))
> > + return;
> > +
> > + desc = irq_to_desc(dev_priv->lpe_audio.irq);
> > +
> > + lpe_audio_irq_mask(&desc->irq_data);
> > +
> > + lpe_audio_platdev_destroy(dev_priv);
> > +
> > + irq_free_desc(dev_priv->lpe_audio.irq);
> > +}
> > diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h
> > new file mode 100644
> > index 0000000..952de05
> > --- /dev/null
> > +++ b/include/drm/intel_lpe_audio.h
> > @@ -0,0 +1,46 @@
> > +/*
> > + * Copyright © 2016 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + */
> > +
> > +#ifndef _INTEL_LPE_AUDIO_H_
> > +#define _INTEL_LPE_AUDIO_H_
> > +
> > +#include <linux/types.h>
> > +#include <linux/spinlock_types.h>
> > +
> > +#define HDMI_MAX_ELD_BYTES 128
> > +
> > +struct intel_hdmi_lpe_audio_eld {
> > + int port_id;
> > + unsigned char eld_data[HDMI_MAX_ELD_BYTES];
> > +};
> > +
> > +struct intel_hdmi_lpe_audio_pdata {
> > + bool notify_pending;
> > + int tmds_clock_speed;
> > + bool hdmi_connected;
> > + struct intel_hdmi_lpe_audio_eld eld;
> > + void (*notify_audio_lpe)(void *audio_ptr);
> > + spinlock_t lpe_audio_slock;
> > +};
> > +
> > +#endif /* _I915_LPE_AUDIO_H_ */
>
> --
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list