[Intel-gfx] [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings

Ville Syrjälä ville.syrjala at linux.intel.com
Mon Jan 30 13:10:41 UTC 2017


On Sat, Jan 28, 2017 at 06:18:45PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 01/28/2017 05:25 PM, Hans de Goede wrote:
> > Hi,
> >
> > On 01/27/2017 02:51 PM, Ville Syrjälä wrote:
> >> On Mon, Jan 23, 2017 at 10:09:58PM +0100, Hans de Goede wrote:
> >>> Make sure the P-Unit or the PMIC i2c bus is not in use when we send a
> >>> request to the P-Unit by calling iosf_mbi_punit_acquire() / _release()
> >>> around P-Unit write accesses.
> >>
> >> Can't we just stuff the calls into the actual punit write function
> >> rather than sprinkling them all over the place?
> >
> > punit access is acquired across sections like this:
> >
> >         iosf_mbi_punit_acquire();
> >
> >         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >         val &= ~DSPFREQGUAR_MASK;
> >         val |= (cmd << DSPFREQGUAR_SHIFT);
> >         vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
> >         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) &
> >                       DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
> >                      50)) {
> >                 DRM_ERROR("timed out waiting for CDclk change\n");
> >         }
> >         iosf_mbi_punit_release();
> >
> > Where we want to wait for the requested change to have taken
> > effect before releasing the punit.

Hmm. That's somewhat unfortunate. It also highlights a problem with the
patch wrt. RPS. We don't wait for the GPU to actually change frequencies
in set_rps() because that would slow things down too much. So I have to
wonder how much luck is needed to make this workaround really effective.

> >
> >>
> >> + a comment would be nice why it's there.
> >
> > I will add comments to the acquire calls.
> >
> >> Do we need a kconfig select/depends on the iosf_mbi thing? Or some
> >> ifdefs?
> >
> > No, the iosf_mbi header defines empty inline versions of
> > iosf_mbi_punit_acquire / _release if IOSF_MBI is disabled,
> > this does mean that iosf_mbi must be builtin if the i915
> > driver is. I'll add:
> >
> >     depends on DRM_I915=IOSF_MBI || IOSF_MBI=y
> >
> > To the i915 Kconfig to enforce this.
> 
> Hmm, ok so that does not work (long cyclic dependency through the
> selection of ACPI_VIDEO).
> 
> So I've now added this instead:
> 
> 	# iosf_mbi needs to be builtin if we are builtin
> 	select IOSF_MBI if DRM_I915=y

That's probably not going to help anyone since i915 is usually a module.

> 
> Regards,
> 
> Hans
> 
> 
> >>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=155241
> >>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> >>> Tested-by: tagorereddy <tagore.chandan at gmail.com>
> >>> ---
> >>> Changes in v2:
> >>> -Spelling: P-Unit, PMIC
> >>> -Adjust for iosf_mbi_punit_lock/_unlock to _acquire/_release rename
> >>> ---
> >>>  drivers/gpu/drm/i915/intel_display.c    | 6 ++++++
> >>>  drivers/gpu/drm/i915/intel_pm.c         | 9 +++++++++
> >>>  drivers/gpu/drm/i915/intel_runtime_pm.c | 9 +++++++++
> >>>  3 files changed, 24 insertions(+)
> >>>
> >>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> >>> index 5604701..13e5152 100644
> >>> --- a/drivers/gpu/drm/i915/intel_display.c
> >>> +++ b/drivers/gpu/drm/i915/intel_display.c
> >>> @@ -47,6 +47,7 @@
> >>>  #include <drm/drm_rect.h>
> >>>  #include <linux/dma_remapping.h>
> >>>  #include <linux/reservation.h>
> >>> +#include <asm/iosf_mbi.h>
> >>>
> >>>  static bool is_mmio_work(struct intel_flip_work *work)
> >>>  {
> >>> @@ -6421,6 +6422,8 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
> >>>          cmd = 0;
> >>>
> >>>      mutex_lock(&dev_priv->rps.hw_lock);
> >>> +    iosf_mbi_punit_acquire();
> >>> +
> >>>      val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >>>      val &= ~DSPFREQGUAR_MASK;
> >>>      val |= (cmd << DSPFREQGUAR_SHIFT);
> >>> @@ -6430,6 +6433,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
> >>>               50)) {
> >>>          DRM_ERROR("timed out waiting for CDclk change\n");
> >>>      }
> >>> +    iosf_mbi_punit_release();
> >>>      mutex_unlock(&dev_priv->rps.hw_lock);
> >>>
> >>>      mutex_lock(&dev_priv->sb_lock);
> >>> @@ -6497,6 +6501,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
> >>>      cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
> >>>
> >>>      mutex_lock(&dev_priv->rps.hw_lock);
> >>> +    iosf_mbi_punit_acquire();
> >>>      val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >>>      val &= ~DSPFREQGUAR_MASK_CHV;
> >>>      val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
> >>> @@ -6506,6 +6511,7 @@ static void cherryview_set_cdclk(struct drm_device *dev, int cdclk)
> >>>               50)) {
> >>>          DRM_ERROR("timed out waiting for CDclk change\n");
> >>>      }
> >>> +    iosf_mbi_punit_release();
> >>>      mutex_unlock(&dev_priv->rps.hw_lock);
> >>>
> >>>      intel_update_cdclk(dev_priv);
> >>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> >>> index 249623d..adff84a 100644
> >>> --- a/drivers/gpu/drm/i915/intel_pm.c
> >>> +++ b/drivers/gpu/drm/i915/intel_pm.c
> >>> @@ -32,6 +32,7 @@
> >>>  #include "../../../platform/x86/intel_ips.h"
> >>>  #include <linux/module.h>
> >>>  #include <drm/drm_atomic_helper.h>
> >>> +#include <asm/iosf_mbi.h>
> >>>
> >>>  /**
> >>>   * DOC: RC6
> >>> @@ -276,6 +277,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable)
> >>>      u32 val;
> >>>
> >>>      mutex_lock(&dev_priv->rps.hw_lock);
> >>> +    iosf_mbi_punit_acquire();
> >>>
> >>>      val = vlv_punit_read(dev_priv, PUNIT_REG_DDR_SETUP2);
> >>>      if (enable)
> >>> @@ -290,6 +292,7 @@ static void chv_set_memory_dvfs(struct drm_i915_private *dev_priv, bool enable)
> >>>                FORCE_DDR_FREQ_REQ_ACK) == 0, 3))
> >>>          DRM_ERROR("timed out waiting for Punit DDR DVFS request\n");
> >>>
> >>> +    iosf_mbi_punit_release();
> >>>      mutex_unlock(&dev_priv->rps.hw_lock);
> >>>  }
> >>>
> >>> @@ -298,6 +301,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
> >>>      u32 val;
> >>>
> >>>      mutex_lock(&dev_priv->rps.hw_lock);
> >>> +    iosf_mbi_punit_acquire();
> >>>
> >>>      val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >>>      if (enable)
> >>> @@ -306,6 +310,7 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
> >>>          val &= ~DSP_MAXFIFO_PM5_ENABLE;
> >>>      vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val);
> >>>
> >>> +    iosf_mbi_punit_release();
> >>>      mutex_unlock(&dev_priv->rps.hw_lock);
> >>>  }
> >>>
> >>> @@ -4553,6 +4558,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev)
> >>>
> >>>      if (IS_CHERRYVIEW(dev_priv)) {
> >>>          mutex_lock(&dev_priv->rps.hw_lock);
> >>> +        iosf_mbi_punit_acquire();
> >>>
> >>>          val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >>>          if (val & DSP_MAXFIFO_PM5_ENABLE)
> >>> @@ -4582,6 +4588,7 @@ void vlv_wm_get_hw_state(struct drm_device *dev)
> >>>                  wm->level = VLV_WM_LEVEL_DDR_DVFS;
> >>>          }
> >>>
> >>> +        iosf_mbi_punit_release();
> >>>          mutex_unlock(&dev_priv->rps.hw_lock);
> >>>      }
> >>>
> >>> @@ -4988,7 +4995,9 @@ static void valleyview_set_rps(struct drm_i915_private *dev_priv, u8 val)
> >>>      I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
> >>>
> >>>      if (val != dev_priv->rps.cur_freq) {
> >>> +        iosf_mbi_punit_acquire();
> >>>          vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ, val);
> >>> +        iosf_mbi_punit_release();
> >>>          if (!IS_CHERRYVIEW(dev_priv))
> >>>              gen6_set_rps_thresholds(dev_priv, val);
> >>>      }
> >>> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>> index c0b7e95..e66bcc8 100644
> >>> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>> @@ -28,6 +28,7 @@
> >>>
> >>>  #include <linux/pm_runtime.h>
> >>>  #include <linux/vgaarb.h>
> >>> +#include <asm/iosf_mbi.h>
> >>>
> >>>  #include "i915_drv.h"
> >>>  #include "intel_drv.h"
> >>> @@ -1027,6 +1028,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv,
> >>>      if (COND)
> >>>          goto out;
> >>>
> >>> +    iosf_mbi_punit_acquire();
> >>> +
> >>>      ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
> >>>      ctrl &= ~mask;
> >>>      ctrl |= state;
> >>> @@ -1037,6 +1040,8 @@ static void vlv_set_power_well(struct drm_i915_private *dev_priv,
> >>>                state,
> >>>                vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
> >>>
> >>> +    iosf_mbi_punit_release();
> >>> +
> >>>  #undef COND
> >>>
> >>>  out:
> >>> @@ -1643,6 +1648,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
> >>>      if (COND)
> >>>          goto out;
> >>>
> >>> +    iosf_mbi_punit_acquire();
> >>> +
> >>>      ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
> >>>      ctrl &= ~DP_SSC_MASK(pipe);
> >>>      ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
> >>> @@ -1653,6 +1660,8 @@ static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
> >>>                state,
> >>>                vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
> >>>
> >>> +    iosf_mbi_punit_release();
> >>> +
> >>>  #undef COND
> >>>
> >>>  out:
> >>> --
> >>> 2.9.3
> >>

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list