[Intel-gfx] [PATCH i-g-t v3 19/33] tests/kms_plane: Add support for dynamic number of planes
Robert Foss
robert.foss at collabora.com
Mon Jan 30 14:12:10 UTC 2017
Add changes reflecting the new support for dynamic number of planes per pipe.
Signed-off-by: Robert Foss <robert.foss at collabora.com>
Reviewed-by: Mika Kahola <mika.kahola at intel.com>
---
tests/kms_plane.c | 96 ++++++++++++++++++++++++++++++-------------------------
1 file changed, 53 insertions(+), 43 deletions(-)
diff --git a/tests/kms_plane.c b/tests/kms_plane.c
index e843a170..d0de0f52 100644
--- a/tests/kms_plane.c
+++ b/tests/kms_plane.c
@@ -150,7 +150,7 @@ enum {
static void
test_plane_position_with_output(data_t *data,
enum pipe pipe,
- enum igt_plane plane,
+ int plane,
igt_output_t *output,
unsigned int flags)
{
@@ -170,7 +170,7 @@ test_plane_position_with_output(data_t *data,
igt_output_set_pipe(output, pipe);
mode = igt_output_get_mode(output);
- primary = igt_output_get_plane(output, 0);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
sprite = igt_output_get_plane(output, plane);
create_fb_for_mode__position(data, mode, 100, 100, 64, 64,
@@ -222,7 +222,7 @@ test_plane_position_with_output(data_t *data,
}
static void
-test_plane_position(data_t *data, enum pipe pipe, enum igt_plane plane,
+test_plane_position(data_t *data, enum pipe pipe, int plane,
unsigned int flags)
{
igt_output_t *output;
@@ -294,7 +294,7 @@ enum {
static void
test_plane_panning_with_output(data_t *data,
enum pipe pipe,
- enum igt_plane plane,
+ int plane,
igt_output_t *output,
unsigned int flags)
{
@@ -348,8 +348,8 @@ test_plane_panning_with_output(data_t *data,
}
static void
-test_plane_panning(data_t *data, enum pipe pipe, enum igt_plane plane,
- unsigned int flags)
+test_plane_panning(data_t *data, enum pipe pipe, int plane,
+ unsigned int flags)
{
igt_output_t *output;
int connected_outs = 0;
@@ -367,47 +367,57 @@ test_plane_panning(data_t *data, enum pipe pipe, enum igt_plane plane,
}
static void
-run_tests_for_pipe_plane(data_t *data, enum pipe pipe, enum igt_plane plane)
+run_tests_for_pipe_plane(data_t *data, enum pipe pipe)
{
- igt_subtest_f("plane-position-covered-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_position(data, pipe, plane,
- TEST_POSITION_FULLY_COVERED);
-
- igt_subtest_f("plane-position-hole-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_position(data, pipe, plane, 0);
-
- igt_subtest_f("plane-position-hole-dpms-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_position(data, pipe, plane,
- TEST_DPMS);
-
- igt_subtest_f("plane-panning-top-left-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_panning(data, pipe, plane, TEST_PANNING_TOP_LEFT);
-
- igt_subtest_f("plane-panning-bottom-right-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_panning(data, pipe, plane,
- TEST_PANNING_BOTTOM_RIGHT);
-
- igt_subtest_f("plane-panning-bottom-right-suspend-pipe-%s-plane-%d",
- kmstest_pipe_name(pipe), plane)
- test_plane_panning(data, pipe, plane,
- TEST_PANNING_BOTTOM_RIGHT |
- TEST_SUSPEND_RESUME);
-}
+ igt_subtest_f("plane-position-covered-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_position(data, pipe, plane,
+ TEST_POSITION_FULLY_COVERED);
+ }
-static void
-run_tests_for_pipe(data_t *data, enum pipe pipe)
-{
- int plane;
+ igt_subtest_f("plane-position-hole-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_position(data, pipe, plane, 0);
+ }
+
+ igt_subtest_f("plane-position-hole-dpms-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_position(data, pipe, plane,
+ TEST_DPMS);
+ }
+
+ igt_subtest_f("plane-panning-top-left-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_panning(data, pipe, plane, TEST_PANNING_TOP_LEFT);
+ }
- for (plane = 1; plane < IGT_MAX_PLANES; plane++)
- run_tests_for_pipe_plane(data, pipe, plane);
+ igt_subtest_f("plane-panning-bottom-right-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_panning(data, pipe, plane,
+ TEST_PANNING_BOTTOM_RIGHT);
+ }
+
+ igt_subtest_f("plane-panning-bottom-right-suspend-pipe-%s-planes",
+ kmstest_pipe_name(pipe)) {
+ int n_planes = data->display.pipes[pipe].n_planes;
+ for (int plane = 1; plane < n_planes; plane++)
+ test_plane_panning(data, pipe, plane,
+ TEST_PANNING_BOTTOM_RIGHT |
+ TEST_SUSPEND_RESUME);
+ }
}
+
static data_t data;
igt_main
@@ -425,7 +435,7 @@ igt_main
}
for (int pipe = 0; pipe < I915_MAX_PIPES; pipe++)
- run_tests_for_pipe(&data, pipe);
+ run_tests_for_pipe_plane(&data, pipe);
igt_fixture {
igt_display_fini(&data.display);
--
2.11.0.453.g787f75f05
More information about the Intel-gfx
mailing list