[Intel-gfx] [PATCH 16/16] drm/atomic: Remove deprecated accessor macros
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Wed Jul 12 08:13:44 UTC 2017
Now that the last users have been converted, we can finally get rid of
for_each_obj_in_state, we have better macros to replace them with.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Daniel Vetter <daniel.vetter at intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Sean Paul <seanpaul at chromium.org>
Cc: David Airlie <airlied at linux.ie>
---
include/drm/drm_atomic.h | 75 ---------------------------------------------
include/drm/drm_connector.h | 3 +-
include/drm/drm_crtc.h | 8 ++---
include/drm/drm_plane.h | 8 ++---
4 files changed, 9 insertions(+), 85 deletions(-)
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index dcc8e0cdb7ff..9f484d0ebcb6 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -555,31 +555,6 @@ int __must_check drm_atomic_nonblocking_commit(struct drm_atomic_state *state);
void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
/**
- * for_each_connector_in_state - iterate over all connectors in an atomic update
- * @__state: &struct drm_atomic_state pointer
- * @connector: &struct drm_connector iteration cursor
- * @connector_state: &struct drm_connector_state iteration cursor
- * @__i: int iteration cursor, for macro-internal use
- *
- * This iterates over all connectors in an atomic update. Note that before the
- * software state is committed (by calling drm_atomic_helper_swap_state(), this
- * points to the new state, while afterwards it points to the old state. Due to
- * this tricky confusion this macro is deprecated.
- *
- * FIXME:
- *
- * Replace all usage of this with one of the explicit iterators below and then
- * remove this macro.
- */
-#define for_each_connector_in_state(__state, connector, connector_state, __i) \
- for ((__i) = 0; \
- (__i) < (__state)->num_connector && \
- ((connector) = (__state)->connectors[__i].ptr, \
- (connector_state) = (__state)->connectors[__i].state, 1); \
- (__i)++) \
- for_each_if (connector)
-
-/**
* for_each_oldnew_connector_in_state - iterate over all connectors in an atomic update
* @__state: &struct drm_atomic_state pointer
* @connector: &struct drm_connector iteration cursor
@@ -643,31 +618,6 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
for_each_if (connector)
/**
- * for_each_crtc_in_state - iterate over all connectors in an atomic update
- * @__state: &struct drm_atomic_state pointer
- * @crtc: &struct drm_crtc iteration cursor
- * @crtc_state: &struct drm_crtc_state iteration cursor
- * @__i: int iteration cursor, for macro-internal use
- *
- * This iterates over all CRTCs in an atomic update. Note that before the
- * software state is committed (by calling drm_atomic_helper_swap_state(), this
- * points to the new state, while afterwards it points to the old state. Due to
- * this tricky confusion this macro is deprecated.
- *
- * FIXME:
- *
- * Replace all usage of this with one of the explicit iterators below and then
- * remove this macro.
- */
-#define for_each_crtc_in_state(__state, crtc, crtc_state, __i) \
- for ((__i) = 0; \
- (__i) < (__state)->dev->mode_config.num_crtc && \
- ((crtc) = (__state)->crtcs[__i].ptr, \
- (crtc_state) = (__state)->crtcs[__i].state, 1); \
- (__i)++) \
- for_each_if (crtc_state)
-
-/**
* for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
* @__state: &struct drm_atomic_state pointer
* @crtc: &struct drm_crtc iteration cursor
@@ -727,31 +677,6 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
for_each_if (crtc)
/**
- * for_each_plane_in_state - iterate over all planes in an atomic update
- * @__state: &struct drm_atomic_state pointer
- * @plane: &struct drm_plane iteration cursor
- * @plane_state: &struct drm_plane_state iteration cursor
- * @__i: int iteration cursor, for macro-internal use
- *
- * This iterates over all planes in an atomic update. Note that before the
- * software state is committed (by calling drm_atomic_helper_swap_state(), this
- * points to the new state, while afterwards it points to the old state. Due to
- * this tricky confusion this macro is deprecated.
- *
- * FIXME:
- *
- * Replace all usage of this with one of the explicit iterators below and then
- * remove this macro.
- */
-#define for_each_plane_in_state(__state, plane, plane_state, __i) \
- for ((__i) = 0; \
- (__i) < (__state)->dev->mode_config.num_total_plane && \
- ((plane) = (__state)->planes[__i].ptr, \
- (plane_state) = (__state)->planes[__i].state, 1); \
- (__i)++) \
- for_each_if (plane_state)
-
-/**
* for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
* @__state: &struct drm_atomic_state pointer
* @plane: &struct drm_plane iteration cursor
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ae5b7dc316c8..4878007103e2 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -858,8 +858,7 @@ struct drm_connector {
* This is protected by @drm_mode_config.connection_mutex. Note that
* nonblocking atomic commits access the current connector state without
* taking locks. Either by going through the &struct drm_atomic_state
- * pointers, see for_each_connector_in_state(),
- * for_each_oldnew_connector_in_state(),
+ * pointers, see for_each_oldnew_connector_in_state(),
* for_each_old_connector_in_state() and
* for_each_new_connector_in_state(). Or through careful ordering of
* atomic commit operations as implemented in the atomic helpers, see
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 3a911a64c257..c4c949ea20da 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -807,10 +807,10 @@ struct drm_crtc {
* This is protected by @mutex. Note that nonblocking atomic commits
* access the current CRTC state without taking locks. Either by going
* through the &struct drm_atomic_state pointers, see
- * for_each_crtc_in_state(), for_each_oldnew_crtc_in_state(),
- * for_each_old_crtc_in_state() and for_each_new_crtc_in_state(). Or
- * through careful ordering of atomic commit operations as implemented
- * in the atomic helpers, see &struct drm_crtc_commit.
+ * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and
+ * for_each_new_crtc_in_state(). Or through careful ordering of atomic
+ * commit operations as implemented in the atomic helpers, see
+ * &struct drm_crtc_commit.
*/
struct drm_crtc_state *state;
diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h
index 9ab3e7044812..a1b3aa5d1223 100644
--- a/include/drm/drm_plane.h
+++ b/include/drm/drm_plane.h
@@ -514,10 +514,10 @@ struct drm_plane {
* This is protected by @mutex. Note that nonblocking atomic commits
* access the current plane state without taking locks. Either by going
* through the &struct drm_atomic_state pointers, see
- * for_each_plane_in_state(), for_each_oldnew_plane_in_state(),
- * for_each_old_plane_in_state() and for_each_new_plane_in_state(). Or
- * through careful ordering of atomic commit operations as implemented
- * in the atomic helpers, see &struct drm_crtc_commit.
+ * for_each_oldnew_plane_in_state(), for_each_old_plane_in_state() and
+ * for_each_new_plane_in_state(). Or through careful ordering of atomic
+ * commit operations as implemented in the atomic helpers, see
+ * &struct drm_crtc_commit.
*/
struct drm_plane_state *state;
--
2.11.0
More information about the Intel-gfx
mailing list