[Intel-gfx] [PATCH v3 4/4] drm/i915/edp: Be less aggressive about changing link config on eDP
Manasi Navare
manasi.d.navare at intel.com
Wed Jul 12 21:28:34 UTC 2017
On Tue, Jul 11, 2017 at 03:19:56PM -0700, Jim Bride wrote:
> This set of changes has some history to them. There were several attempts
> to add what was called "fast link training" to i915, which actually wasn't
> fast link training as per the DP spec. These changes were
>
> 5fa836a9d859 ("drm/i915: DP link training optimization")
> 4e96c97742f4 ("drm/i915: eDP link training optimization")
>
> which were eventually hand-reverted by
>
> 34511dce4 ("drm/i915: Revert DisplayPort fast link training feature")
>
> in kernel 4.7-rc4. The eDP pieces of the above revert, however, had some
> very bad side-effects on PSR functionality on Skylake. The issue at
> hand is that when PSR exits i915 briefly emits TP1 followed by TP2/3
> (depending on the original link configuration) in order to quickly get
> the source and sink back in synchronization across the link before handing
> control back to the i915. There's an assumption that none of the link
> configuration information has changed (and thus it's still valid) since the
> last full link training operation. The revert above was identified via a
> bisect as the cause of some of Skylake's PSR woes. This patch, largely
> based on
>
> commit 4e96c97742f4201edf1b0f8e1b1b6b2ac6ff33e7
> Author: Mika Kahola <mika.kahola at intel.com>
> Date: Wed Apr 29 09:17:39 2015 +0300
> drm/i915: eDP link training optimization
>
> puts the eDP portions of this patch back in place. None of the flickering
> issues that spurred the revert have been seen, and I suspect the real
> culprits here were addressed by some of the recent link training changes
> that Manasi has implemented, and PSR on Skylake is definitely more happy
> with these changes in-place.
>
> v2: Rebase
>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Manasi D Navare <manasi.d.navare at intel.com>
> Cc: Mika Kahola <mika.kahola at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Fixes: 34511dce4 ("drm/i915: Revert DisplayPort fast link training feature")
> Signed-off-by: Jim Bride <jim.bride at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 4 +++-
> drivers/gpu/drm/i915/intel_dp_link_training.c | 11 ++++++++++-
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> 3 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index ee2a3db..b4cb5ba 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -106,7 +106,7 @@ static const int default_rates[] = { 162000, 270000, 540000 };
> * If a CPU or PCH DP output is attached to an eDP panel, this function
> * will return true, and false otherwise.
> */
> -static bool is_edp(struct intel_dp *intel_dp)
> +bool is_edp(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>
> @@ -4764,6 +4764,7 @@ intel_dp_long_pulse(struct intel_connector *intel_connector)
> intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
>
> intel_dp->reset_link_params = false;
> + intel_dp->train_set_valid = false;
> }
>
> intel_dp_print_rates(intel_dp);
> @@ -6037,6 +6038,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> intel_dp_set_source_rates(intel_dp);
>
> intel_dp->reset_link_params = true;
> + intel_dp->train_set_valid = false;
> intel_dp->pps_pipe = INVALID_PIPE;
> intel_dp->active_pipe = INVALID_PIPE;
>
> diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> index b79c1c0..60233e2 100644
> --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> @@ -94,7 +94,8 @@ static bool
> intel_dp_reset_link_train(struct intel_dp *intel_dp,
> uint8_t dp_train_pat)
> {
> - memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
> + if (!intel_dp->train_set_valid)
> + memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
> intel_dp_set_signal_levels(intel_dp);
> return intel_dp_set_link_train(intel_dp, dp_train_pat);
> }
> @@ -162,6 +163,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> DP_TRAINING_PATTERN_1 |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to enable link training\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> @@ -174,21 +176,25 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
>
> if (!intel_dp_get_link_status(intel_dp, link_status)) {
> DRM_ERROR("failed to get link status\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> if (drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
> DRM_DEBUG_KMS("clock recovery OK\n");
> + intel_dp->train_set_valid = is_edp(intel_dp);
> return true;
> }
>
> if (voltage_tries == 5) {
> DRM_DEBUG_KMS("Same voltage tried 5 times\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> if (max_vswing_tries == 1) {
> DRM_DEBUG_KMS("Max Voltage Swing reached\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> @@ -198,6 +204,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> intel_get_adjust_train(intel_dp, link_status);
> if (!intel_dp_update_link_train(intel_dp)) {
> DRM_ERROR("failed to update link training\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> @@ -256,6 +263,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> training_pattern |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to start channel equalization\n");
> + intel_dp->train_set_valid = false;
> return false;
> }
>
> @@ -296,6 +304,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> /* Try 5 times, else fail and try at lower BW */
> if (tries == 5) {
> intel_dp_dump_link_status(link_status);
> + intel_dp->train_set_valid = false;
> DRM_DEBUG_KMS("Channel equalization failed 5 times\n");
> }
>
I see that train_set_valid is set to false in case any kind of failure
and when the function is return a false.
If you see this false is handled in failure_handling: inside intel_dp_start_link_train. So instead of setting train_set_valid as false each time when we return false, it makes more sense to set it in failure_handling label.
Also, in intel_dp_link_training_channel_equalization(), when drm_dp_channel_eq_ok(), dont we need to set train_set_valid to is_edp() or true?
Manasi
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0c14b05..a1b4b5d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -996,6 +996,7 @@ struct intel_dp {
> struct drm_dp_aux aux;
> enum intel_display_power_domain aux_power_domain;
> uint8_t train_set[4];
> + bool train_set_valid;
> int panel_power_up_delay;
> int panel_power_down_delay;
> int panel_power_cycle_delay;
> @@ -1571,6 +1572,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
> }
>
> bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
> +bool is_edp(struct intel_dp *intel_dp);
> int intel_dp_link_required(int pixel_clock, int bpp);
> int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
> bool intel_digital_port_connected(struct drm_i915_private *dev_priv,
> --
> 2.7.4
>
More information about the Intel-gfx
mailing list