[Intel-gfx] [PATCH v2] drm/i915: Explicit the connector name for DP link training result

[Jani Nikula]

On Wed, 19 Jul 2017, Paul Kocialkowski <paul.kocialkowski at linux.intel.com> wrote:
> On Tue, 2017-07-18 at 12:20 -0700, Manasi Navare wrote:
>> On Tue, Jul 18, 2017 at 05:25:36PM +0300, Paul Kocialkowski wrote:
>> > This adds the connector name when printing a debug message about the
>> > DP
>> > link training result. It is useful to figure out what connector is
>> > failing when multiple DP connectors are used.
>> > 
>> 
>> Thanks for the patch, this does make sense during the link training
>> failure debugging to know the connector name.
>> While at it feel free to change "Failed", "Link Rate, Lane Count", to
>> upper case
>> in the failure_handling case to be consistent with the pass case.
>
> Thanks for the review!
>
> Now that the patch was merged, do you feel like I should make a follow-
> up patch to fix consistency in the upper case use or is it enough of a
> detail that we can just forget about it?

If it bothers you, send a patch, otherwise wait for it to bother someone
else enough to send a patch. ;)

But please avoid the overuse of all caps for regular words, or
capitalization except at the beginning of sentences. I'd go with
something like this all over the place:

"Link training failed, link rate %d, lane count %d\n"

But it hasn't bothered me enough to send a patch. ;)

BR,
Jani.



>
>> Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
>> 
>> Manasi
>> 
>> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at linux.intel.com>
>> > ---
>> >  drivers/gpu/drm/i915/intel_dp_link_training.c | 8 ++++++--
>> >  1 file changed, 6 insertions(+), 2 deletions(-)
>> > 
>> > diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c
>> > b/drivers/gpu/drm/i915/intel_dp_link_training.c
>> > index b79c1c0e404c..05907fa8a553 100644
>> > --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
>> > +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
>> > @@ -321,12 +321,16 @@ intel_dp_start_link_train(struct intel_dp
>> > *intel_dp)
>> >  	if (!intel_dp_link_training_channel_equalization(intel_dp))
>> >  		goto failure_handling;
>> >  
>> > -	DRM_DEBUG_KMS("Link Training Passed at Link Rate = %d, Lane
>> > count = %d",
>> > +	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training Passed at
>> > Link Rate = %d, Lane count = %d",
>> > +		      intel_connector->base.base.id,
>> > +		      intel_connector->base.name,
>> >  		      intel_dp->link_rate, intel_dp->lane_count);
>> >  	return;
>> >  
>> >   failure_handling:
>> > -	DRM_DEBUG_KMS("Link Training failed at link rate = %d, lane
>> > count = %d",
>> > +	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Link Training failed at
>> > link rate = %d, lane count = %d",
>> > +		      intel_connector->base.base.id,
>> > +		      intel_connector->base.name,
>> >  		      intel_dp->link_rate, intel_dp->lane_count);
>> >  	if (!intel_dp_get_link_train_fallback_values(intel_dp,
>> >  						     intel_dp-
>> > >link_rate,
>> > -- 
>> > 2.13.2
>> > 

-- 
Jani Nikula, Intel Open Source Technology Center