[Intel-gfx] [PATCH 5/6] drm/i915/cnp: add CNP gmbus support

Rodrigo Vivi rodrigo.vivi at intel.com
Thu Jun 1 00:23:08 UTC 2017


On CNP PCH based platforms the gmbus is on the south display that
is on PCH. The existing implementation for previous platforms
already covers the need for CNP expect for the pin pair configuration
that follows similar definitions that we had on BXT.

v2: Don't drop "_BXT" as the indicator of the first platform
    supporting this pin numbers. Suggested by Daniel.
v3: Add missing else and fix register table since CNP GPIO_CTL
    starts on 0xC5014.
v4: Fix pin number and map according to the current available VBT.
    Re-add pin 4 for port D. Lost during some rebase.
v5: Use table as spec. If VBT is wrong it should be ignored.

Cc: Daniel Vetter <daniel.vetter at intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   |  3 ++-
 drivers/gpu/drm/i915/intel_hdmi.c |  8 +++++---
 drivers/gpu/drm/i915/intel_i2c.c  | 15 +++++++++++++--
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cb83fb7..1329420 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2626,9 +2626,10 @@ enum skl_disp_power_wells {
 #define   GMBUS_PIN_DPB		5 /* SDVO, HDMIB */
 #define   GMBUS_PIN_DPD		6 /* HDMID */
 #define   GMBUS_PIN_RESERVED	7 /* 7 reserved */
-#define   GMBUS_PIN_1_BXT	1
+#define   GMBUS_PIN_1_BXT	1 /* BXT+ (atom) and CNP+ (big core) */
 #define   GMBUS_PIN_2_BXT	2
 #define   GMBUS_PIN_3_BXT	3
+#define   GMBUS_PIN_4_CNP	4
 #define   GMBUS_NUM_PINS	7 /* including 0 */
 #define GMBUS1			_MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */
 #define   GMBUS_SW_CLR_INT	(1<<31)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 41267ff..ec0779a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1802,19 +1802,21 @@ static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
 
 	switch (port) {
 	case PORT_B:
-		if (IS_GEN9_LP(dev_priv))
+		if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
 			ddc_pin = GMBUS_PIN_1_BXT;
 		else
 			ddc_pin = GMBUS_PIN_DPB;
 		break;
 	case PORT_C:
-		if (IS_GEN9_LP(dev_priv))
+		if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
 			ddc_pin = GMBUS_PIN_2_BXT;
 		else
 			ddc_pin = GMBUS_PIN_DPC;
 		break;
 	case PORT_D:
-		if (IS_CHERRYVIEW(dev_priv))
+		if (HAS_PCH_CNP(dev_priv))
+			ddc_pin = GMBUS_PIN_4_CNP;
+		else if (IS_CHERRYVIEW(dev_priv))
 			ddc_pin = GMBUS_PIN_DPD_CHV;
 		else
 			ddc_pin = GMBUS_PIN_DPD;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index b6401e8..3c9e00d 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -68,11 +68,20 @@ struct gmbus_pin {
 	[GMBUS_PIN_3_BXT] = { "misc", GPIOD },
 };
 
+static const struct gmbus_pin gmbus_pins_cnp[] = {
+	[GMBUS_PIN_1_BXT] = { "dpb", GPIOB },
+	[GMBUS_PIN_2_BXT] = { "dpc", GPIOC },
+	[GMBUS_PIN_3_BXT] = { "misc", GPIOD },
+	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
+};
+
 /* pin is expected to be valid */
 static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
 					     unsigned int pin)
 {
-	if (IS_GEN9_LP(dev_priv))
+	if (HAS_PCH_CNP(dev_priv))
+		return &gmbus_pins_cnp[pin];
+	else if (IS_GEN9_LP(dev_priv))
 		return &gmbus_pins_bxt[pin];
 	else if (IS_GEN9_BC(dev_priv))
 		return &gmbus_pins_skl[pin];
@@ -87,7 +96,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
 {
 	unsigned int size;
 
-	if (IS_GEN9_LP(dev_priv))
+	if (HAS_PCH_CNP(dev_priv))
+		size = ARRAY_SIZE(gmbus_pins_cnp);
+	else if (IS_GEN9_LP(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_bxt);
 	else if (IS_GEN9_BC(dev_priv))
 		size = ARRAY_SIZE(gmbus_pins_skl);
-- 
1.9.1



More information about the Intel-gfx mailing list