[Intel-gfx] [PATCH 6/6] drm/i915/cnp: Panel Power sequence changes for CNP PCH.

Rodrigo Vivi rodrigo.vivi at intel.com
Thu Jun 1 22:33:12 UTC 2017


Panel Power sequences for CNP is similar to Broxton,
but with only one sequencer.

Main difference from SPT is that PP_DIVISOR was removed
and power cycle delay has been moved to PP_CONTROL.

v2: Add missed pp_div write, that is now part of PP_CONTROL[8:4]
    as on Broxton. (Found by DK)

v3: Improve commit message. (By DK)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor at intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 58dca87..db51338 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -798,7 +798,7 @@ static void intel_pps_get_registers(struct drm_i915_private *dev_priv,
 	regs->pp_stat = PP_STATUS(pps_idx);
 	regs->pp_on = PP_ON_DELAYS(pps_idx);
 	regs->pp_off = PP_OFF_DELAYS(pps_idx);
-	if (!IS_GEN9_LP(dev_priv))
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv))
 		regs->pp_div = PP_DIVISOR(pps_idx);
 }
 
@@ -5099,7 +5099,7 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 
 	pp_on = I915_READ(regs.pp_on);
 	pp_off = I915_READ(regs.pp_off);
-	if (!IS_GEN9_LP(dev_priv)) {
+	if (!IS_GEN9_LP(dev_priv) && !HAS_PCH_CNP(dev_priv)) {
 		I915_WRITE(regs.pp_ctrl, pp_ctl);
 		pp_div = I915_READ(regs.pp_div);
 	}
@@ -5117,7 +5117,7 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 	seq->t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
 		u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
 			BXT_POWER_CYCLE_DELAY_SHIFT;
 		if (tmp > 0)
@@ -5274,7 +5274,7 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 		 (seq->t10 << PANEL_POWER_DOWN_DELAY_SHIFT);
 	/* Compute the divisor for the pp clock, simply match the Bspec
 	 * formula. */
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
 		pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
@@ -5300,7 +5300,7 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 
 	I915_WRITE(regs.pp_on, pp_on);
 	I915_WRITE(regs.pp_off, pp_off);
-	if (IS_GEN9_LP(dev_priv))
+	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv))
 		I915_WRITE(regs.pp_ctrl, pp_div);
 	else
 		I915_WRITE(regs.pp_div, pp_div);
@@ -5308,7 +5308,7 @@ static void intel_dp_init_panel_power_timestamps(struct intel_dp *intel_dp)
 	DRM_DEBUG_KMS("panel power sequencer register settings: PP_ON %#x, PP_OFF %#x, PP_DIV %#x\n",
 		      I915_READ(regs.pp_on),
 		      I915_READ(regs.pp_off),
-		      IS_GEN9_LP(dev_priv) ?
+		      (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) ?
 		      (I915_READ(regs.pp_ctrl) & BXT_POWER_CYCLE_DELAY_MASK) :
 		      I915_READ(regs.pp_div));
 }
-- 
1.9.1



More information about the Intel-gfx mailing list