[Intel-gfx] [PATCH 1/7] drm/i915: Fix deadlock witha the pipe A quirk during resume
Jani Nikula
jani.nikula at linux.intel.com
Fri Jun 2 07:04:33 UTC 2017
On Thu, 01 Jun 2017, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Thu, Jun 01, 2017 at 05:47:45PM +0300, Jani Nikula wrote:
>> On Thu, 01 Jun 2017, ville.syrjala at linux.intel.com wrote:
>> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> >
>> > Pass down the correct acquire context to the pipe A quirk load detect
>> > hack during display resume. Avoids deadlocking the entire thing.
>>
>> Have we seen this in the wild? References?
>
> My 830.
Okay, just checking if the cc: stable was really warranted in this one
and the next patch. Carry on! :)
BR,
Jani.
>
>>
>> BR,
>> Jani.
>>
>> >
>> > Cc: stable at vger.kernel.org
>> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> > Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.")
>> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> > ---
>> > drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
>> > 1 file changed, 12 insertions(+), 9 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> > index ed41b59ee8e3..2f76a63efe8c 100644
>> > --- a/drivers/gpu/drm/i915/intel_display.c
>> > +++ b/drivers/gpu/drm/i915/intel_display.c
>> > @@ -120,7 +120,8 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>> > static void skylake_pfit_enable(struct intel_crtc *crtc);
>> > static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
>> > static void ironlake_pfit_enable(struct intel_crtc *crtc);
>> > -static void intel_modeset_setup_hw_state(struct drm_device *dev);
>> > +static void intel_modeset_setup_hw_state(struct drm_device *dev,
>> > + struct drm_modeset_acquire_ctx *ctx);
>> > static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
>> >
>> > struct intel_limit {
>> > @@ -3461,7 +3462,7 @@ __intel_display_resume(struct drm_device *dev,
>> > struct drm_crtc *crtc;
>> > int i, ret;
>> >
>> > - intel_modeset_setup_hw_state(dev);
>> > + intel_modeset_setup_hw_state(dev, ctx);
>> > i915_redisable_vga(to_i915(dev));
>> >
>> > if (!state)
>> > @@ -15094,7 +15095,7 @@ int intel_modeset_init(struct drm_device *dev)
>> > intel_setup_outputs(dev_priv);
>> >
>> > drm_modeset_lock_all(dev);
>> > - intel_modeset_setup_hw_state(dev);
>> > + intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
>> > drm_modeset_unlock_all(dev);
>> >
>> > for_each_intel_crtc(dev, crtc) {
>> > @@ -15131,13 +15132,13 @@ int intel_modeset_init(struct drm_device *dev)
>> > return 0;
>> > }
>> >
>> > -static void intel_enable_pipe_a(struct drm_device *dev)
>> > +static void intel_enable_pipe_a(struct drm_device *dev,
>> > + struct drm_modeset_acquire_ctx *ctx)
>> > {
>> > struct intel_connector *connector;
>> > struct drm_connector_list_iter conn_iter;
>> > struct drm_connector *crt = NULL;
>> > struct intel_load_detect_pipe load_detect_temp;
>> > - struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
>> > int ret;
>> >
>> > /* We can't just switch on the pipe A, we need to set things up with a
>> > @@ -15209,7 +15210,8 @@ static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
>> > (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == TRANSCODER_A);
>> > }
>> >
>> > -static void intel_sanitize_crtc(struct intel_crtc *crtc)
>> > +static void intel_sanitize_crtc(struct intel_crtc *crtc,
>> > + struct drm_modeset_acquire_ctx *ctx)
>> > {
>> > struct drm_device *dev = crtc->base.dev;
>> > struct drm_i915_private *dev_priv = to_i915(dev);
>> > @@ -15265,7 +15267,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>> > * resume. Force-enable the pipe to fix this, the update_dpms
>> > * call below we restore the pipe to the right state, but leave
>> > * the required bits on. */
>> > - intel_enable_pipe_a(dev);
>> > + intel_enable_pipe_a(dev, ctx);
>> > }
>> >
>> > /* Adjust the state of the output pipe according to whether we
>> > @@ -15568,7 +15570,8 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv)
>> > * and sanitizes it to the current state
>> > */
>> > static void
>> > -intel_modeset_setup_hw_state(struct drm_device *dev)
>> > +intel_modeset_setup_hw_state(struct drm_device *dev,
>> > + struct drm_modeset_acquire_ctx *ctx)
>> > {
>> > struct drm_i915_private *dev_priv = to_i915(dev);
>> > enum pipe pipe;
>> > @@ -15588,7 +15591,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev)
>> > for_each_pipe(dev_priv, pipe) {
>> > crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
>> >
>> > - intel_sanitize_crtc(crtc);
>> > + intel_sanitize_crtc(crtc, ctx);
>> > intel_dump_pipe_config(crtc, crtc->config,
>> > "[setup_hw_state]");
>> > }
>>
>> --
>> Jani Nikula, Intel Open Source Technology Center
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list