[Intel-gfx] [PATCH] drm/i915/cnl: Implement CNL display init/unit sequence
Imre Deak
imre.deak at intel.com
Mon Jun 5 16:58:39 UTC 2017
On Mon, Jun 05, 2017 at 07:38:45PM +0300, Vivi, Rodrigo wrote:
> On Mon, 2017-06-05 at 18:07 +0300, Imre Deak wrote:
> > On Thu, Apr 13, 2017 at 09:13:02AM -0700, Rodrigo Vivi wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > >
> > > Implement the CNL display init/uninit sequence as outlined in Bspec.
> > >
> > > Quite similar to SKL/BXT. The main complicaiton is probably the extra
> > > procmon setup we must do based on the process/voltage information we
> > > can read out from some register.
> > >
> > > For now we assume DMC will handle the AUX wells, and we'll just enable
> > > all of them during the init sequence. Even if DMC will handle them, we
> > > should perhaps trim the set of enabled wells based on which DDI ports
> > > are actually present.
> >
> > The above needs to be aligned with the current version of the code.
> >
> > Yes, looks like DMC saves/restores the state of both AUX and DDI power
> > wells. The spec says to enable the AUX wells during init, but I think
> > it's ok to do this on-demand.
>
> Indeed. I updated the code during some rebase but forgot to update the
> commit message. I will remove this chuck on next rebase.
>
> >
> > >
> > > v2: s/skl_dbuf/gen9_dbuf/ to follow upstream
> > > bxt needed a cdclk sanitize step, so let's add it for cnl too
> > > v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander)
> > > v4: Rebased by Rodrigo after Ville's cdclk rework
> > > v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup
> > > Fix procpon Mask. (Credits-to Paulo and Clint)
> > > Remove A0 workaround.
> > > v6: Rebased on top of recent code (Rodrigo).
> > > v7: Respect the order of sanitize_ after set_
> > > (Done by Rodrigo, Requested by Ville)
> > > v8: (Rodrigo) Remove CHICKEN_MISC_2 double definition.
> > >
> > > Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > > Cc: Clint Taylor <clinton.a.taylor at intel.com>
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/i915_reg.h | 23 +++++++
> > > drivers/gpu/drm/i915/intel_cdclk.c | 108 ++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/i915/intel_drv.h | 2 +
> > > drivers/gpu/drm/i915/intel_runtime_pm.c | 113 +++++++++++++++++++++++++++++++-
> > > 4 files changed, 244 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 8353892..9b2d8c0 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -1655,6 +1655,9 @@ enum skl_disp_power_wells {
> > > #define PHY_RESERVED (1 << 7)
> > > #define BXT_PORT_CL1CM_DW0(phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC)
> > >
> > > +#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)
> > > +#define CL_POWER_DOWN_ENABLE (1 << 4)
> > > +
> > > #define _PORT_CL1CM_DW9_A 0x162024
> > > #define _PORT_CL1CM_DW9_BC 0x6C024
> > > #define IREF0RC_OFFSET_SHIFT 8
> > > @@ -1687,6 +1690,25 @@ enum skl_disp_power_wells {
> > > #define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)
> > > #define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28)
> > >
> > > +#define CNL_PORT_COMP_DW0 _MMIO(0x162100)
> > > +#define COMP_INIT (1 << 31)
> > > +#define CNL_PORT_COMP_DW1 _MMIO(0x162104)
> > > +#define CNL_PORT_COMP_DW3 _MMIO(0x16210c)
> > > +#define PROCESS_INFO_DOT_0 (0 << 26)
> > > +#define PROCESS_INFO_DOT_1 (1 << 26)
> > > +#define PROCESS_INFO_DOT_4 (2 << 26)
> > > +#define PROCESS_INFO_MASK (7 << 26)
> > > +#define PROCESS_INFO_SHIFT 26
> > > +#define VOLTAGE_INFO_0_85V (0 << 24)
> > > +#define VOLTAGE_INFO_0_95V (1 << 24)
> > > +#define VOLTAGE_INFO_1_05V (2 << 24)
> > > +#define VOLTAGE_INFO_MASK (3 << 24)
> > > +#define VOLTAGE_INFO_SHIFT 24
> > > +#define CNL_PORT_COMP_DW8 _MMIO(0x162120)
> > > +#define PRDIC_ICOMP_DIS (1 << 14)
> >
> > DW8 looks to be unused.
>
> I believe an early w/a for A0 was using that, but that got remove.
>
> I will also remove this.
>
> >
> > > +#define CNL_PORT_COMP_DW9 _MMIO(0x162124)
> > > +#define CNL_PORT_COMP_DW10 _MMIO(0x162128)
> > > +
> > > /* BXT PHY Ref registers */
> > > #define _PORT_REF_DW3_A 0x16218C
> > > #define _PORT_REF_DW3_BC 0x6C18C
> > > @@ -6513,6 +6535,7 @@ enum {
> > > #define KVM_CONFIG_CHANGE_NOTIFICATION_SELECT (1 << 14)
> > >
> > > #define CHICKEN_MISC_2 _MMIO(0x42084)
> > > +#define COMP_PWR_DOWN (1 << 23)
> > > #define GLK_CL0_PWR_DOWN (1 << 10)
> > > #define GLK_CL1_PWR_DOWN (1 << 11)
> > > #define GLK_CL2_PWR_DOWN (1 << 12)
> > > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> > > index bee4394..f9ba1e7 100644
> > > --- a/drivers/gpu/drm/i915/intel_cdclk.c
> > > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> > > @@ -1555,6 +1555,114 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
> > > intel_update_cdclk(dev_priv);
> > > }
> > >
> > > +static int cnl_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
> > > +{
> > > + int ratio;
> > > +
> > > + if (cdclk == dev_priv->cdclk.hw.ref)
> > > + return 0;
> > > +
> > > + switch (cdclk) {
> > > + default:
> > > + MISSING_CASE(cdclk);
> > > + case 168000:
> > > + case 336000:
> > > + ratio = dev_priv->cdclk.hw.ref == 19200 ? 35 : 28;
> > > + break;
> > > + case 528000:
> > > + ratio = dev_priv->cdclk.hw.ref == 19200 ? 55 : 44;
> > > + break;
> > > + }
> > > +
> > > + return dev_priv->cdclk.hw.ref * ratio;
> > > +}
> > > +
> > > +static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
> > > +{
> > > + u32 cdctl, expected;
> > > +
> > > + intel_update_cdclk(dev_priv);
> > > +
> > > + if (dev_priv->cdclk.hw.vco == 0 ||
> > > + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
> > > + goto sanitize;
> > > +
> > > + /* DPLL okay; verify the cdclock
> > > + *
> > > + * Some BIOS versions leave an incorrect decimal frequency value and
> > > + * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
> > > + * so sanitize this register.
> > > + */
> > > + cdctl = I915_READ(CDCLK_CTL);
> > > + /*
> > > + * Let's ignore the pipe field, since BIOS could have configured the
> > > + * dividers both synching to an active pipe, or asynchronously
> > > + * (PIPE_NONE).
> > > + */
> > > + cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
> > > +
> > > + expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
> > > + skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
> > > +
> > > + if (cdctl == expected)
> > > + /* All well; nothing to sanitize */
> > > + return;
> > > +
> > > +sanitize:
> > > + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
> > > +
> > > + /* force cdclk programming */
> > > + dev_priv->cdclk.hw.cdclk = 0;
> > > +
> > > + /* force full PLL disable + enable */
> > > + dev_priv->cdclk.hw.vco = -1;
> > > +}
> > > +
> > > +/**
> > > + * cnl_init_cdclk - Initialize CDCLK on CNL
> > > + * @dev_priv: i915 device
> > > + *
> > > + * Initialize CDCLK for CNL. This is generally
> > > + * done only during the display core initialization sequence,
> > > + * after which the DMC will take care of turning CDCLK off/on
> > > + * as needed.
> > > + */
> > > +
> >
> > Extra w/s.
>
> what do you mean here?
The blank line between the docbook part and function definition.
>
> >
> > Looks ok:
> > Reviewed-by: Imre Deak <imre.deak at intel.com>
>
> thanks
>
> >
> > > +void cnl_init_cdclk(struct drm_i915_private *dev_priv)
> > > +{
> > > + struct intel_cdclk_state cdclk_state;
> > > +
> > > + cnl_sanitize_cdclk(dev_priv);
> > > +
> > > + if (dev_priv->cdclk.hw.cdclk != 0 &&
> > > + dev_priv->cdclk.hw.vco != 0)
> > > + return;
> > > +
> > > + cdclk_state = dev_priv->cdclk.hw;
> > > +
> > > + cdclk_state.cdclk = 168000;
> > > + cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
> > > +
> > > + cnl_set_cdclk(dev_priv, &cdclk_state);
> > > +}
> > > +
> > > +/**
> > > + * cnl_uninit_cdclk - Uninitialize CDCLK on CNL
> > > + * @dev_priv: i915 device
> > > + *
> > > + * Uninitialize CDCLK for CNL. This is done only
> > > + * during the display core uninitialization sequence.
> > > + */
> > > +void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
> > > +{
> > > + struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
> > > +
> > > + cdclk_state.cdclk = cdclk_state.ref;
> > > + cdclk_state.vco = 0;
> > > +
> > > + cnl_set_cdclk(dev_priv, &cdclk_state);
> > > +}
> > > +
> > > /**
> > > * intel_cdclk_state_compare - Determine if two CDCLK states differ
> > > * @a: first CDCLK state
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index 7bc0c25..a526e6e 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -1280,6 +1280,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
> > > /* intel_cdclk.c */
> > > void skl_init_cdclk(struct drm_i915_private *dev_priv);
> > > void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
> > > +void cnl_init_cdclk(struct drm_i915_private *dev_priv);
> > > +void cnl_uninit_cdclk(struct drm_i915_private *dev_priv);
> > > void bxt_init_cdclk(struct drm_i915_private *dev_priv);
> > > void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
> > > void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
> > > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > > index 1797c91..5c3c6ec 100644
> > > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > > @@ -2698,6 +2698,111 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
> > > mutex_unlock(&power_domains->lock);
> > > }
> > >
> > > +#define CNL_PROCMON_IDX(val) \
> > > + (((val) & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) >> VOLTAGE_INFO_SHIFT)
> > > +#define NUM_CNL_PROCMON \
> > > + (CNL_PROCMON_IDX(VOLTAGE_INFO_MASK | PROCESS_INFO_MASK) + 1)
> > > +
> > > +static const struct cnl_procmon {
> > > + u32 dw1, dw9, dw10;
> > > +} cnl_procmon_values[NUM_CNL_PROCMON] = {
> > > + [CNL_PROCMON_IDX(VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0)] =
> > > + { .dw1 = 0x00 << 16, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
> > > + [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0)] =
> > > + { .dw1 = 0x00 << 16, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
> > > + [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1)] =
> > > + { .dw1 = 0x00 << 16, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
> > > + [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0)] =
> > > + { .dw1 = 0x00 << 16, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
> > > + [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1)] =
> > > + { .dw1 = 0x44 << 16, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
> > > +};
> > > +
> > > +static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
> > > +{
> > > + struct i915_power_domains *power_domains = &dev_priv->power_domains;
> > > + const struct cnl_procmon *procmon;
> > > + struct i915_power_well *well;
> > > + u32 val;
> > > +
> > > + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> > > +
> > > + /* 1. Enable PCH Reset Handshake */
> > > + val = I915_READ(HSW_NDE_RSTWRN_OPT);
> > > + val |= RESET_PCH_HANDSHAKE_ENABLE;
> > > + I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> > > +
> > > + /* 2. Enable Comp */
> > > + val = I915_READ(CHICKEN_MISC_2);
> > > + val &= ~COMP_PWR_DOWN;
> > > + I915_WRITE(CHICKEN_MISC_2, val);
> > > +
> > > + val = I915_READ(CNL_PORT_COMP_DW3);
> > > + procmon = &cnl_procmon_values[CNL_PROCMON_IDX(val)];
> > > +
> > > + WARN_ON(procmon->dw10 == 0);
> > > +
> > > + val = I915_READ(CNL_PORT_COMP_DW1);
> > > + val &= ~((0xff << 16) | 0xff);
> > > + val |= procmon->dw1;
> > > + I915_WRITE(CNL_PORT_COMP_DW1, val);
> > > +
> > > + I915_WRITE(CNL_PORT_COMP_DW9, procmon->dw9);
> > > + I915_WRITE(CNL_PORT_COMP_DW10, procmon->dw10);
> > > +
> > > + val = I915_READ(CNL_PORT_COMP_DW0);
> > > + val |= COMP_INIT;
> > > + I915_WRITE(CNL_PORT_COMP_DW0, val);
> > > +
> > > + /* 3. */
> > > + val = I915_READ(CNL_PORT_CL1CM_DW5);
> > > + val |= CL_POWER_DOWN_ENABLE;
> > > + I915_WRITE(CNL_PORT_CL1CM_DW5, val);
> > > +
> > > + /* 4. Enable Power Well 1 (PG1) and Aux IO Power */
> > > + mutex_lock(&power_domains->lock);
> > > + well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
> > > + intel_power_well_enable(dev_priv, well);
> > > + mutex_unlock(&power_domains->lock);
> > > +
> > > + /* 5. Enable CD clock */
> > > + cnl_init_cdclk(dev_priv);
> > > +
> > > + /* 6. Enable DBUF */
> > > + gen9_dbuf_enable(dev_priv);
> > > +}
> > > +
> > > +#undef CNL_PROCMON_IDX
> > > +#undef NUM_CNL_PROCMON
> > > +
> > > +static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
> > > +{
> > > + struct i915_power_domains *power_domains = &dev_priv->power_domains;
> > > + struct i915_power_well *well;
> > > + u32 val;
> > > +
> > > + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> > > +
> > > + /* 1. Disable all display engine functions -> aready done */
> > > +
> > > + /* 2. Disable DBUF */
> > > + gen9_dbuf_disable(dev_priv);
> > > +
> > > + /* 3. Disable CD clock */
> > > + cnl_uninit_cdclk(dev_priv);
> > > +
> > > + /* 4. Disable Power Well 1 (PG1) and Aux IO Power */
> > > + mutex_lock(&power_domains->lock);
> > > + well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
> > > + intel_power_well_disable(dev_priv, well);
> > > + mutex_unlock(&power_domains->lock);
> > > +
> > > + /* 5. Disable Comp */
> > > + val = I915_READ(CHICKEN_MISC_2);
> > > + val |= COMP_PWR_DOWN;
> > > + I915_WRITE(CHICKEN_MISC_2, val);
> > > +}
> > > +
> > > static void chv_phy_control_init(struct drm_i915_private *dev_priv)
> > > {
> > > struct i915_power_well *cmn_bc =
> > > @@ -2830,7 +2935,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
> > >
> > > power_domains->initializing = true;
> > >
> > > - if (IS_GEN9_BC(dev_priv)) {
> > > + if (IS_CANNONLAKE(dev_priv)) {
> > > + cnl_display_core_init(dev_priv, resume);
> > > + } else if (IS_GEN9_BC(dev_priv)) {
> > > skl_display_core_init(dev_priv, resume);
> > > } else if (IS_GEN9_LP(dev_priv)) {
> > > bxt_display_core_init(dev_priv, resume);
> > > @@ -2869,7 +2976,9 @@ void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
> > > if (!i915.disable_power_well)
> > > intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
> > >
> > > - if (IS_GEN9_BC(dev_priv))
> > > + if (IS_CANNONLAKE(dev_priv))
> > > + cnl_display_core_uninit(dev_priv);
> > > + else if (IS_GEN9_BC(dev_priv))
> > > skl_display_core_uninit(dev_priv);
> > > else if (IS_GEN9_LP(dev_priv))
> > > bxt_display_core_uninit(dev_priv);
> > > --
> > > 1.9.1
> > >
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx at lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the Intel-gfx
mailing list