[Intel-gfx] [PATCH v11 3/3] drm/i915: Add option to support dynamic backlight via DPCD
Pandiyan, Dhinakaran
dhinakaran.pandiyan at intel.com
Mon Jun 5 21:29:15 UTC 2017
On Mon, 2017-06-05 at 12:43 -0700, Puthikorn Voravootivat wrote:
> Sorry forgot to remove Gerrit Change-ID before sending the email.
>
>
> Do you want me to send the same patches again with your reviewed-by
> tag and
> the Gerrit change-Id removed?
Thanks, please do.
-DK
>
> On Mon, Jun 5, 2017 at 11:49 AM, Pandiyan, Dhinakaran
> <dhinakaran.pandiyan at intel.com> wrote:
> On Fri, 2017-06-02 at 19:04 -0700, Puthikorn Voravootivat
> wrote:
> > This patch adds option to enable dynamic backlight for eDP
> > panel that supports this feature via DPCD register and
> > set minimum / maximum brightness to 0% and 100% of the
> > normal brightness.
> >
> > Change-Id: I52f04b814bb4cd9df570ab59094ae974b9baec5b
> > Signed-off-by: Puthikorn Voravootivat <puthik at chromium.org>
> > ---
> > drivers/gpu/drm/i915/i915_params.c | 5 +++++
> > drivers/gpu/drm/i915/i915_params.h | 3 ++-
> > drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 26
> ++++++++++++++++++++++++++
> > 3 files changed, 33 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_params.c
> b/drivers/gpu/drm/i915/i915_params.c
> > index 3758ae1f11b4..d84042ddf1fc 100644
> > --- a/drivers/gpu/drm/i915/i915_params.c
> > +++ b/drivers/gpu/drm/i915/i915_params.c
> > @@ -65,6 +65,7 @@ struct i915_params i915 __read_mostly = {
> > .inject_load_failure = 0,
> > .enable_dpcd_backlight = -1,
> > .enable_gvt = false,
> > + .enable_dbc = true,
> > };
> >
> > module_param_named(modeset, i915.modeset, int, 0400);
> > @@ -254,3 +255,7 @@ MODULE_PARM_DESC(enable_dpcd_backlight,
> > module_param_named(enable_gvt, i915.enable_gvt, bool,
> 0400);
> > MODULE_PARM_DESC(enable_gvt,
> > "Enable support for Intel GVT-g graphics
> virtualization host support(default:false)");
> > +
> > +module_param_named_unsafe(enable_dbc, i915.enable_dbc,
> bool, 0600);
> > +MODULE_PARM_DESC(enable_dbc,
> > + "Enable support for dynamic backlight control
> (default:true)");
> > diff --git a/drivers/gpu/drm/i915/i915_params.h
> b/drivers/gpu/drm/i915/i915_params.h
> > index 643dfaf41c1f..99f68d853c18 100644
> > --- a/drivers/gpu/drm/i915/i915_params.h
> > +++ b/drivers/gpu/drm/i915/i915_params.h
> > @@ -67,7 +67,8 @@
> > func(bool, verbose_state_checks); \
> > func(bool, nuclear_pageflip); \
> > func(bool, enable_dp_mst); \
> > - func(bool, enable_gvt)
> > + func(bool, enable_gvt); \
> > + func(bool, enable_dbc)
> >
> > #define MEMBER(T, member) T member
> > struct i915_params {
> > diff --git a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> > index b73b3d431a82..b2f4cc975a3e 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_aux_backlight.c
> > @@ -172,6 +172,24 @@ static bool
> intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
> > return true;
> > }
> >
> > +/*
> > +* Set minimum / maximum dynamic brightness percentage. This
> value is expressed
> > +* as the percentage of normal brightness in 5% increments.
> > +*/
> > +static bool
> > +intel_dp_aux_set_dynamic_backlight_percent(struct intel_dp
> *intel_dp,
> > + u32 min, u32 max)
> > +{
> > + u8 dbc[] = { DIV_ROUND_CLOSEST(min, 5),
> DIV_ROUND_CLOSEST(max, 5) };
> > +
> > + if (drm_dp_dpcd_write(&intel_dp->aux,
> DP_EDP_DBC_MINIMUM_BRIGHTNESS_SET,
> > + dbc, sizeof(dbc)) < 0) {
> > + DRM_DEBUG_KMS("Failed to write aux DBC
> brightness level\n");
> > + return false;
> > + }
> > + return true;
> > +}
> > +
> > static void intel_dp_aux_enable_backlight(struct
> intel_connector *connector)
> > {
> > struct intel_dp *intel_dp =
> enc_to_intel_dp(&connector->encoder->base);
> > @@ -205,6 +223,14 @@ static void
> intel_dp_aux_enable_backlight(struct intel_connector
> *connector)
> > if (intel_dp_aux_set_pwm_freq(connector))
> > new_dpcd_buf |=
> DP_EDP_BACKLIGHT_FREQ_AUX_SET_ENABLE;
> >
> > + if (i915.enable_dbc &&
> > + (intel_dp->edp_dpcd[2] &
> DP_EDP_DYNAMIC_BACKLIGHT_CAP)) {
> > +
> if(intel_dp_aux_set_dynamic_backlight_percent(intel_dp, 0,
> 100)) {
> > + new_dpcd_buf |=
> DP_EDP_DYNAMIC_BACKLIGHT_ENABLE;
> > + DRM_DEBUG_KMS("Enable dynamic
> brightness.\n");
> > + }
> > + }
> > +
> > if (new_dpcd_buf != dpcd_buf) {
> > if (drm_dp_dpcd_writeb(&intel_dp->aux,
> > DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
> new_dpcd_buf) < 0) {
>
>
> 1) The Gerrit Change-ID's you've added in this version *may*
> be a
> problem, haven't seen any patches here with those before.
> 2) The PWM v/s AUX heuristics function looks likes a
> reasonable start
> that can be adjusted later. We should be taking into account
> the number
> of brightness levels b/w PWM pin and AUX options IMO.
> 3) The DPCD r/w needs optimization.
>
> However things lgtm for now. So,
> Reviewed-by: Dhinakaran Pandiyan
> <dhinakaran.pandiyan at intel.com> for
> this series.
>
>
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list