[Intel-gfx] [PATCH v2 1/5] drm/i915: Correctly handle limited range YCbCr data on VLV/CHV
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Thu Jun 8 20:33:10 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Turns out the VLV/CHV fixed function sprite CSC expects full range
data as input. We've been feeding it limited range data to it all
along. To expand the data out to full range we'll use the color
correction registers (brightness, contrast, and saturation).
On CHV pipe B we were actually doing the right thing already because we
progammed the custom CSC matrix to do expect limited range input. Now
that well pre-expand the data out with the color correction unit, we
need to change the CSC matrix to operate with full range input instead.
This should make the sprite output of the other pipes match the sprite
output of pipe B reasonably well. Looking at the resulting pipe CRCs,
there can be a slight difference in the output, but as I don't know
the formula used by the fixed function CSC of the other pipes, I don't
think it's worth the effort to try to match the output exactly. It
might not even be possible due to difference in internal precision etc.
One slight caveat here is that the color correction registers are single
bufferred, so we should really be updating them during vblank, but we
still don't have a mechanism for that, so just toss in another FIXME.
v2: Rebase
Cc: Jyri Sarha <jsarha at ti.com>
Cc: "Tang, Jun" <jun.tang at intel.com>
Reported-by: "Tang, Jun" <jun.tang at intel.com>
Cc: stable at vger.kernel.org
Fixes: 7f1f3851feb0 ("drm/i915: sprite support for ValleyView v4")
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +++++
drivers/gpu/drm/i915/intel_sprite.c | 74 ++++++++++++++++++++++++++++---------
2 files changed, 66 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b6d69e289974..ce7c0dc79cf7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5777,6 +5777,12 @@ enum {
#define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4)
#define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8)
#define SP_CONST_ALPHA_ENABLE (1<<31)
+#define _SPACLRC0 (VLV_DISPLAY_BASE + 0x721d0)
+#define SP_CONTRAST(x) ((x) << 18) /* u3.6 */
+#define SP_BRIGHTNESS(x) ((x) & 0xff) /* s8 */
+#define _SPACLRC1 (VLV_DISPLAY_BASE + 0x721d4)
+#define SP_SH_SIN(x) (((x) & 0x7ff) << 16) /* s4.7 */
+#define SP_SH_COS(x) (x) /* u3.7 */
#define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4)
#define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280)
@@ -5790,6 +5796,8 @@ enum {
#define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0)
#define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4)
#define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8)
+#define _SPBCLRC0 (VLV_DISPLAY_BASE + 0x722d0)
+#define _SPBCLRC1 (VLV_DISPLAY_BASE + 0x722d4)
#define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4)
#define _MMIO_VLV_SPR(pipe, plane_id, reg_a, reg_b) \
@@ -5806,6 +5814,8 @@ enum {
#define SPKEYMAXVAL(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPAKEYMAXVAL, _SPBKEYMAXVAL)
#define SPTILEOFF(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPATILEOFF, _SPBTILEOFF)
#define SPCONSTALPHA(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPACONSTALPHA, _SPBCONSTALPHA)
+#define SPCLRC0(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPACLRC0, _SPBCLRC0)
+#define SPCLRC1(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPACLRC1, _SPBCLRC1)
#define SPGAMC(pipe, plane_id) _MMIO_VLV_SPR((pipe), (plane_id), _SPAGAMC, _SPBGAMC)
/*
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 0c650c2cbca8..2ce3b3c6ffa8 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -325,44 +325,80 @@ skl_disable_plane(struct intel_plane *plane, struct intel_crtc *crtc)
}
static void
-chv_update_csc(struct intel_plane *plane, uint32_t format)
+chv_update_csc(const struct intel_plane_state *plane_state)
{
+ struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
enum plane_id plane_id = plane->id;
/* Seems RGB data bypasses the CSC always */
- if (!format_is_yuv(format))
+ if (!format_is_yuv(fb->format->format))
return;
/*
- * BT.601 limited range YCbCr -> full range RGB
+ * BT.601 full range YCbCr -> full range RGB
*
- * |r| | 6537 4769 0| |cr |
- * |g| = |-3330 4769 -1605| x |y-64|
- * |b| | 0 4769 8263| |cb |
+ * |r| | 5743 4096 0| |cr|
+ * |g| = |-2925 4096 -1410| x |y |
+ * |b| | 0 4096 7258| |cb|
*
- * Cb and Cr apparently come in as signed already, so no
- * need for any offset. For Y we need to remove the offset.
+ * Cb and Cr apparently come in as signed already,
+ * and we get full range data in on account of CLRC0/1
*/
- I915_WRITE_FW(SPCSCYGOFF(plane_id), SPCSC_OOFF(0) | SPCSC_IOFF(-64));
+ I915_WRITE_FW(SPCSCYGOFF(plane_id), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE_FW(SPCSCCBOFF(plane_id), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE_FW(SPCSCCROFF(plane_id), SPCSC_OOFF(0) | SPCSC_IOFF(0));
- I915_WRITE_FW(SPCSCC01(plane_id), SPCSC_C1(4769) | SPCSC_C0(6537));
- I915_WRITE_FW(SPCSCC23(plane_id), SPCSC_C1(-3330) | SPCSC_C0(0));
- I915_WRITE_FW(SPCSCC45(plane_id), SPCSC_C1(-1605) | SPCSC_C0(4769));
- I915_WRITE_FW(SPCSCC67(plane_id), SPCSC_C1(4769) | SPCSC_C0(0));
- I915_WRITE_FW(SPCSCC8(plane_id), SPCSC_C0(8263));
+ I915_WRITE_FW(SPCSCC01(plane_id), SPCSC_C1(4096) | SPCSC_C0(5743));
+ I915_WRITE_FW(SPCSCC23(plane_id), SPCSC_C1(-2925) | SPCSC_C0(0));
+ I915_WRITE_FW(SPCSCC45(plane_id), SPCSC_C1(-1410) | SPCSC_C0(4096));
+ I915_WRITE_FW(SPCSCC67(plane_id), SPCSC_C1(4096) | SPCSC_C0(0));
+ I915_WRITE_FW(SPCSCC8(plane_id), SPCSC_C0(7258));
- I915_WRITE_FW(SPCSCYGICLAMP(plane_id), SPCSC_IMAX(940) | SPCSC_IMIN(64));
- I915_WRITE_FW(SPCSCCBICLAMP(plane_id), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
- I915_WRITE_FW(SPCSCCRICLAMP(plane_id), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
+ I915_WRITE_FW(SPCSCYGICLAMP(plane_id), SPCSC_IMAX(1023) | SPCSC_IMIN(0));
+ I915_WRITE_FW(SPCSCCBICLAMP(plane_id), SPCSC_IMAX(512) | SPCSC_IMIN(-512));
+ I915_WRITE_FW(SPCSCCRICLAMP(plane_id), SPCSC_IMAX(512) | SPCSC_IMIN(-512));
I915_WRITE_FW(SPCSCYGOCLAMP(plane_id), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE_FW(SPCSCCBOCLAMP(plane_id), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE_FW(SPCSCCROCLAMP(plane_id), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
}
+static void
+vlv_update_clrc(const struct intel_plane_state *plane_state)
+{
+ struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
+ enum pipe pipe = plane->pipe;
+ enum plane_id plane_id = plane->id;
+ int con, bri, sh_sin, sh_cos;
+
+ if (format_is_yuv(fb->format->format)) {
+ /*
+ * expand limited range to full range.
+ * contrast is applied first, then brightness
+ */
+ con = ((255 << 7) / 219 + 1) >> 1;
+ bri = -((16 << 1) * 255 / 219 + 1) >> 1;
+ sh_sin = 0;
+ sh_cos = (((128 << 8) / 112) + 1) >> 1;
+ } else {
+ /* pass-through everything */
+ con = 1 << 6;
+ bri = 0;
+ sh_sin = 0;
+ sh_cos = 1 << 7;
+ }
+
+ /* FIXME these register are single buffered :( */
+ I915_WRITE_FW(SPCLRC0(pipe, plane_id),
+ SP_CONTRAST(con) | SP_BRIGHTNESS(bri));
+ I915_WRITE_FW(SPCLRC1(pipe, plane_id),
+ SP_SH_SIN(sh_sin) | SP_SH_COS(sh_cos));
+}
+
static u32 vlv_sprite_ctl(const struct intel_crtc_state *crtc_state,
const struct intel_plane_state *plane_state)
{
@@ -456,8 +492,10 @@ vlv_update_plane(struct intel_plane *plane,
spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+ vlv_update_clrc(plane_state);
+
if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B)
- chv_update_csc(plane, fb->format->format);
+ chv_update_csc(plane_state);
if (key->flags) {
I915_WRITE_FW(SPKEYMINVAL(pipe, plane_id), key->min_value);
--
2.13.0
More information about the Intel-gfx
mailing list