[Intel-gfx] [PATCH 03/18] drm/i915/cnl: Implement CNL display init/unit sequence
Rodrigo Vivi
rodrigo.vivi at intel.com
Fri Jun 9 22:26:00 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Implement the CNL display init/uninit sequence as outlined in Bspec.
Quite similar to SKL/BXT. The main complicaiton is probably the extra
procmon setup we must do based on the process/voltage information we
can read out from some register.
v2: s/skl_dbuf/gen9_dbuf/ to follow upstream
bxt needed a cdclk sanitize step, so let's add it for cnl too
v3: s/CHICKEN_MISC_1/CHICKEN_MISC_2/ (Ander)
v4: Rebased by Rodrigo after Ville's cdclk rework
v5: Removed unecessary Aux IO forced enable/disable, Fix DW10 setup
Fix procpon Mask. (Credits-to Paulo and Clint)
Remove A0 workaround.
v6: Rebased on top of recent code (Rodrigo).
v7: Respect the order of sanitize_ after set_
(Done by Rodrigo, Requested by Ville)
v8: Commit message updated to matvh v5 changes besides
Remove unused DW8 and an extra blank line. (all noticed
by Imre).
v9: Remove __attribute__((unused)) added on latest version
of drm/i915/cnl: Implement .set_cdclk() for CNL.
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Clint Taylor <clinton.a.taylor at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 23 +++++++
drivers/gpu/drm/i915/intel_cdclk.c | 108 +++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_runtime_pm.c | 113 +++++++++++++++++++++++++++++++-
4 files changed, 243 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ac3df67..539e44e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1661,6 +1661,9 @@ enum skl_disp_power_wells {
#define PHY_RESERVED (1 << 7)
#define BXT_PORT_CL1CM_DW0(phy) _BXT_PHY((phy), _PORT_CL1CM_DW0_BC)
+#define CNL_PORT_CL1CM_DW5 _MMIO(0x162014)
+#define CL_POWER_DOWN_ENABLE (1 << 4)
+
#define _PORT_CL1CM_DW9_A 0x162024
#define _PORT_CL1CM_DW9_BC 0x6C024
#define IREF0RC_OFFSET_SHIFT 8
@@ -1693,6 +1696,23 @@ enum skl_disp_power_wells {
#define BXT_PORT_CL2CM_DW6(phy) _BXT_PHY((phy), _PORT_CL2CM_DW6_BC)
#define DW6_OLDO_DYN_PWR_DOWN_EN (1 << 28)
+#define CNL_PORT_COMP_DW0 _MMIO(0x162100)
+#define COMP_INIT (1 << 31)
+#define CNL_PORT_COMP_DW1 _MMIO(0x162104)
+#define CNL_PORT_COMP_DW3 _MMIO(0x16210c)
+#define PROCESS_INFO_DOT_0 (0 << 26)
+#define PROCESS_INFO_DOT_1 (1 << 26)
+#define PROCESS_INFO_DOT_4 (2 << 26)
+#define PROCESS_INFO_MASK (7 << 26)
+#define PROCESS_INFO_SHIFT 26
+#define VOLTAGE_INFO_0_85V (0 << 24)
+#define VOLTAGE_INFO_0_95V (1 << 24)
+#define VOLTAGE_INFO_1_05V (2 << 24)
+#define VOLTAGE_INFO_MASK (3 << 24)
+#define VOLTAGE_INFO_SHIFT 24
+#define CNL_PORT_COMP_DW9 _MMIO(0x162124)
+#define CNL_PORT_COMP_DW10 _MMIO(0x162128)
+
/* BXT PHY Ref registers */
#define _PORT_REF_DW3_A 0x16218C
#define _PORT_REF_DW3_BC 0x6C18C
@@ -6510,6 +6530,9 @@ enum {
#define GLK_CL1_PWR_DOWN (1 << 11)
#define GLK_CL2_PWR_DOWN (1 << 12)
+#define CHICKEN_MISC_2 _MMIO(0x42084)
+#define COMP_PWR_DOWN (1 << 23)
+
#define _CHICKEN_PIPESL_1_A 0x420b0
#define _CHICKEN_PIPESL_1_B 0x420b4
#define HSW_FBCQ_DIS (1 << 22)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 0e892b8..35a1432 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1485,7 +1485,6 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
dev_priv->cdclk.hw.vco = vco;
}
-__attribute__((unused))
static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
const struct intel_cdclk_state *cdclk_state)
{
@@ -1558,6 +1557,113 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
intel_update_cdclk(dev_priv);
}
+static int cnl_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
+{
+ int ratio;
+
+ if (cdclk == dev_priv->cdclk.hw.ref)
+ return 0;
+
+ switch (cdclk) {
+ default:
+ MISSING_CASE(cdclk);
+ case 168000:
+ case 336000:
+ ratio = dev_priv->cdclk.hw.ref == 19200 ? 35 : 28;
+ break;
+ case 528000:
+ ratio = dev_priv->cdclk.hw.ref == 19200 ? 55 : 44;
+ break;
+ }
+
+ return dev_priv->cdclk.hw.ref * ratio;
+}
+
+static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
+{
+ u32 cdctl, expected;
+
+ intel_update_cdclk(dev_priv);
+
+ if (dev_priv->cdclk.hw.vco == 0 ||
+ dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref)
+ goto sanitize;
+
+ /* DPLL okay; verify the cdclock
+ *
+ * Some BIOS versions leave an incorrect decimal frequency value and
+ * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
+ * so sanitize this register.
+ */
+ cdctl = I915_READ(CDCLK_CTL);
+ /*
+ * Let's ignore the pipe field, since BIOS could have configured the
+ * dividers both synching to an active pipe, or asynchronously
+ * (PIPE_NONE).
+ */
+ cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
+
+ expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) |
+ skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
+
+ if (cdctl == expected)
+ /* All well; nothing to sanitize */
+ return;
+
+sanitize:
+ DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n");
+
+ /* force cdclk programming */
+ dev_priv->cdclk.hw.cdclk = 0;
+
+ /* force full PLL disable + enable */
+ dev_priv->cdclk.hw.vco = -1;
+}
+
+/**
+ * cnl_init_cdclk - Initialize CDCLK on CNL
+ * @dev_priv: i915 device
+ *
+ * Initialize CDCLK for CNL. This is generally
+ * done only during the display core initialization sequence,
+ * after which the DMC will take care of turning CDCLK off/on
+ * as needed.
+ */
+void cnl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state;
+
+ cnl_sanitize_cdclk(dev_priv);
+
+ if (dev_priv->cdclk.hw.cdclk != 0 &&
+ dev_priv->cdclk.hw.vco != 0)
+ return;
+
+ cdclk_state = dev_priv->cdclk.hw;
+
+ cdclk_state.cdclk = 168000;
+ cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
+
+ cnl_set_cdclk(dev_priv, &cdclk_state);
+}
+
+/**
+ * cnl_uninit_cdclk - Uninitialize CDCLK on CNL
+ * @dev_priv: i915 device
+ *
+ * Uninitialize CDCLK for CNL. This is done only
+ * during the display core uninitialization sequence.
+ */
+void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw;
+
+ cdclk_state.cdclk = cdclk_state.ref;
+ cdclk_state.vco = 0;
+
+ cnl_set_cdclk(dev_priv, &cdclk_state);
+}
+
/**
* intel_cdclk_state_compare - Determine if two CDCLK states differ
* @a: first CDCLK state
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 83dd409..ca3322b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1309,6 +1309,8 @@ void intel_audio_codec_enable(struct intel_encoder *encoder,
/* intel_cdclk.c */
void skl_init_cdclk(struct drm_i915_private *dev_priv);
void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
+void cnl_init_cdclk(struct drm_i915_private *dev_priv);
+void cnl_uninit_cdclk(struct drm_i915_private *dev_priv);
void bxt_init_cdclk(struct drm_i915_private *dev_priv);
void bxt_uninit_cdclk(struct drm_i915_private *dev_priv);
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 8a6f287..436ec7a 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -2696,6 +2696,111 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
mutex_unlock(&power_domains->lock);
}
+#define CNL_PROCMON_IDX(val) \
+ (((val) & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) >> VOLTAGE_INFO_SHIFT)
+#define NUM_CNL_PROCMON \
+ (CNL_PROCMON_IDX(VOLTAGE_INFO_MASK | PROCESS_INFO_MASK) + 1)
+
+static const struct cnl_procmon {
+ u32 dw1, dw9, dw10;
+} cnl_procmon_values[NUM_CNL_PROCMON] = {
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0)] =
+ { .dw1 = 0x00 << 16, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
+ [CNL_PROCMON_IDX(VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1)] =
+ { .dw1 = 0x44 << 16, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
+};
+
+static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ const struct cnl_procmon *procmon;
+ struct i915_power_well *well;
+ u32 val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /* 1. Enable PCH Reset Handshake */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ val |= RESET_PCH_HANDSHAKE_ENABLE;
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
+
+ /* 2. Enable Comp */
+ val = I915_READ(CHICKEN_MISC_2);
+ val &= ~COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+
+ val = I915_READ(CNL_PORT_COMP_DW3);
+ procmon = &cnl_procmon_values[CNL_PROCMON_IDX(val)];
+
+ WARN_ON(procmon->dw10 == 0);
+
+ val = I915_READ(CNL_PORT_COMP_DW1);
+ val &= ~((0xff << 16) | 0xff);
+ val |= procmon->dw1;
+ I915_WRITE(CNL_PORT_COMP_DW1, val);
+
+ I915_WRITE(CNL_PORT_COMP_DW9, procmon->dw9);
+ I915_WRITE(CNL_PORT_COMP_DW10, procmon->dw10);
+
+ val = I915_READ(CNL_PORT_COMP_DW0);
+ val |= COMP_INIT;
+ I915_WRITE(CNL_PORT_COMP_DW0, val);
+
+ /* 3. */
+ val = I915_READ(CNL_PORT_CL1CM_DW5);
+ val |= CL_POWER_DOWN_ENABLE;
+ I915_WRITE(CNL_PORT_CL1CM_DW5, val);
+
+ /* 4. Enable Power Well 1 (PG1) and Aux IO Power */
+ mutex_lock(&power_domains->lock);
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_enable(dev_priv, well);
+ mutex_unlock(&power_domains->lock);
+
+ /* 5. Enable CD clock */
+ cnl_init_cdclk(dev_priv);
+
+ /* 6. Enable DBUF */
+ gen9_dbuf_enable(dev_priv);
+}
+
+#undef CNL_PROCMON_IDX
+#undef NUM_CNL_PROCMON
+
+static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ struct i915_power_well *well;
+ u32 val;
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ /* 1. Disable all display engine functions -> aready done */
+
+ /* 2. Disable DBUF */
+ gen9_dbuf_disable(dev_priv);
+
+ /* 3. Disable CD clock */
+ cnl_uninit_cdclk(dev_priv);
+
+ /* 4. Disable Power Well 1 (PG1) and Aux IO Power */
+ mutex_lock(&power_domains->lock);
+ well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
+ intel_power_well_disable(dev_priv, well);
+ mutex_unlock(&power_domains->lock);
+
+ /* 5. Disable Comp */
+ val = I915_READ(CHICKEN_MISC_2);
+ val |= COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+}
+
static void chv_phy_control_init(struct drm_i915_private *dev_priv)
{
struct i915_power_well *cmn_bc =
@@ -2828,7 +2933,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
power_domains->initializing = true;
- if (IS_GEN9_BC(dev_priv)) {
+ if (IS_CANNONLAKE(dev_priv)) {
+ cnl_display_core_init(dev_priv, resume);
+ } else if (IS_GEN9_BC(dev_priv)) {
skl_display_core_init(dev_priv, resume);
} else if (IS_GEN9_LP(dev_priv)) {
bxt_display_core_init(dev_priv, resume);
@@ -2867,7 +2974,9 @@ void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
if (!i915.disable_power_well)
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
- if (IS_GEN9_BC(dev_priv))
+ if (IS_CANNONLAKE(dev_priv))
+ cnl_display_core_uninit(dev_priv);
+ else if (IS_GEN9_BC(dev_priv))
skl_display_core_uninit(dev_priv);
else if (IS_GEN9_LP(dev_priv))
bxt_display_core_uninit(dev_priv);
--
1.9.1
More information about the Intel-gfx
mailing list