[Intel-gfx] drm/i915: Make MMIO_PORT flexible.
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Jun 12 14:56:33 UTC 2017
On Fri, Jun 09, 2017 at 02:07:33PM -0700, Rodrigo Vivi wrote:
> In the past the magic reg_a + (reg_b - reg_a) * port
> was enough because every new register that was appearing
> on new platforms was respecting the same gap.
>
> However on more recent platforms we start seeing many
> registers that doesn't respect the gap.
Do you have a list of such registers?
> So picking from
> a list of registers seems to be the more general approach
> that covers all cases.
>
> So let's make MMIO_PORT use _PICK directly so we don't
How much is this going to blow up the code size?
> need to create MMIO_PORT3 MMIO_PORT5 MMIO_PORT6 or
> whatever number of different ports with different registers
> that doesn't respect the gap.
>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 57 +++++++++++++++++++++++++++++++++--------
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b6d69e2..9a57a17 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -57,9 +57,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
> #define _TRANS(tran, a, b) ((a) + (tran)*((b)-(a)))
> #define _MMIO_TRANS(tran, a, b) _MMIO(_TRANS(tran, a, b))
> #define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
> -#define _MMIO_PORT(port, a, b) _MMIO(_PORT(port, a, b))
> +#define _MMIO_PORT(port, ...) _MMIO(_PICK(port, __VA_ARGS__))
> #define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
> -#define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
> #define _PHY3(phy, ...) _PICK(phy, __VA_ARGS__)
> #define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
>
> @@ -1576,7 +1575,8 @@ enum skl_disp_power_wells {
> #define BXT_PHY_LANE_POWERDOWN_ACK (1 << 9)
> #define BXT_PHY_LANE_ENABLED (1 << 8)
> #define BXT_PHY_CTL(port) _MMIO_PORT(port, _BXT_PHY_CTL_DDI_A, \
> - _BXT_PHY_CTL_DDI_B)
> + _BXT_PHY_CTL_DDI_B, \
> + _BXT_PHY_CTL_DDI_C)
>
> #define _PHY_CTL_FAMILY_EDP 0x64C80
> #define _PHY_CTL_FAMILY_DDI 0x64C90
> @@ -1595,7 +1595,9 @@ enum skl_disp_power_wells {
> #define PORT_PLL_REF_SEL (1 << 27)
> #define PORT_PLL_POWER_ENABLE (1 << 26)
> #define PORT_PLL_POWER_STATE (1 << 25)
> -#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, _PORT_PLL_B)
> +#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, \
> + _PORT_PLL_B, \
> + _PORT_PLL_C)
>
> #define _PORT_PLL_EBB_0_A 0x162034
> #define _PORT_PLL_EBB_0_B 0x6C034
> @@ -2453,7 +2455,7 @@ enum skl_disp_power_wells {
> #define _VLV_AUD_PORT_EN_B_DBG (VLV_DISPLAY_BASE + 0x62F20)
> #define _VLV_AUD_PORT_EN_C_DBG (VLV_DISPLAY_BASE + 0x62F30)
> #define _VLV_AUD_PORT_EN_D_DBG (VLV_DISPLAY_BASE + 0x62F34)
> -#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT3((port) - PORT_B, \
> +#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT((port) - PORT_B, \
> _VLV_AUD_PORT_EN_B_DBG, \
> _VLV_AUD_PORT_EN_C_DBG, \
> _VLV_AUD_PORT_EN_D_DBG)
There's really no need to change all the platforms. So would probably be
better to limit the PICK to where we actually need it.
> @@ -4821,7 +4823,10 @@ enum {
> #define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320)
> #define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324)
>
> -#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
> +#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, \
> + _DPB_AUX_CH_CTL, \
> + _DPC_AUX_CH_CTL, \
> + _DPD_AUX_CH_CTL)
> #define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
>
> #define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
> @@ -7214,7 +7219,9 @@ enum {
> #define _PCH_DPD_AUX_CH_DATA4 0xe4320
> #define _PCH_DPD_AUX_CH_DATA5 0xe4324
>
> -#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_CTL, _PCH_DPC_AUX_CH_CTL)
> +#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, \
> + _PCH_DPB_AUX_CH_CTL, \
> + _PCH_DPC_AUX_CH_CTL)
> #define PCH_DP_AUX_CH_DATA(port, i) _MMIO(_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_DATA1, _PCH_DPC_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
You changed CTL but didn't change DATA. Why?
Also note that port D is missing from CTL now!
>
> /* CPT */
> @@ -7844,7 +7851,14 @@ enum {
> /* DisplayPort Transport Control */
> #define _DP_TP_CTL_A 0x64040
> #define _DP_TP_CTL_B 0x64140
> -#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B)
> +#define _DP_TP_CTL_C 0x64240
> +#define _DP_TP_CTL_D 0x64340
> +#define _DP_TP_CTL_E 0x64440
> +#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, \
> + _DP_TP_CTL_B, \
> + _DP_TP_CTL_C, \
> + _DP_TP_CTL_D, \
> + _DP_TP_CTL_E)
> #define DP_TP_CTL_ENABLE (1<<31)
> #define DP_TP_CTL_MODE_SST (0<<27)
> #define DP_TP_CTL_MODE_MST (1<<27)
> @@ -7862,7 +7876,14 @@ enum {
> /* DisplayPort Transport Status */
> #define _DP_TP_STATUS_A 0x64044
> #define _DP_TP_STATUS_B 0x64144
> -#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B)
> +#define _DP_TP_STATUS_C 0x64244
> +#define _DP_TP_STATUS_D 0x64344
> +#define _DP_TP_STATUS_E 0x64444
> +#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, \
> + _DP_TP_STATUS_B, \
> + _DP_TP_STATUS_C, \
> + _DP_TP_STATUS_D, \
> + _DP_TP_STATUS_E)
> #define DP_TP_STATUS_IDLE_DONE (1<<25)
> #define DP_TP_STATUS_ACT_SENT (1<<24)
> #define DP_TP_STATUS_MODE_STATUS_MST (1<<23)
> @@ -7874,7 +7895,14 @@ enum {
> /* DDI Buffer Control */
> #define _DDI_BUF_CTL_A 0x64000
> #define _DDI_BUF_CTL_B 0x64100
> -#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
> +#define _DDI_BUF_CTL_C 0x64200
> +#define _DDI_BUF_CTL_D 0x64300
> +#define _DDI_BUF_CTL_E 0x64400
> +#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, \
> + _DDI_BUF_CTL_B, \
> + _DDI_BUF_CTL_C, \
> + _DDI_BUF_CTL_D, \
> + _DDI_BUF_CTL_E)
> #define DDI_BUF_CTL_ENABLE (1<<31)
> #define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
> #define DDI_BUF_EMP_MASK (0xf<<24)
> @@ -7973,7 +8001,14 @@ enum {
> /* Port clock selection */
> #define _PORT_CLK_SEL_A 0x46100
> #define _PORT_CLK_SEL_B 0x46104
> -#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B)
> +#define _PORT_CLK_SEL_C 0x46108
> +#define _PORT_CLK_SEL_D 0x4610C
> +#define _PORT_CLK_SEL_E 0x46110
> +#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, \
> + _PORT_CLK_SEL_B, \
> + _PORT_CLK_SEL_C, \
> + _PORT_CLK_SEL_D, \
> + _PORT_CLK_SEL_E)
> #define PORT_CLK_SEL_LCPLL_2700 (0<<29)
> #define PORT_CLK_SEL_LCPLL_1350 (1<<29)
> #define PORT_CLK_SEL_LCPLL_810 (2<<29)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list