[Intel-gfx] drm/i915: Make MMIO_PORT flexible.
Rodrigo Vivi
rodrigo.vivi at gmail.com
Mon Jun 12 17:26:00 UTC 2017
On Mon, Jun 12, 2017 at 10:11 AM, Ville Syrjälä
<ville.syrjala at linux.intel.com> wrote:
> On Mon, Jun 12, 2017 at 04:28:28PM +0000, Vivi, Rodrigo wrote:
>> On Mon, 2017-06-12 at 17:56 +0300, Ville Syrjälä wrote:
>> > On Fri, Jun 09, 2017 at 02:07:33PM -0700, Rodrigo Vivi wrote:
>> > > In the past the magic reg_a + (reg_b - reg_a) * port
>> > > was enough because every new register that was appearing
>> > > on new platforms was respecting the same gap.
>> > >
>> > > However on more recent platforms we start seeing many
>> > > registers that doesn't respect the gap.
>>
>>
>> >
>> > Do you have a list of such registers?
>>
>> I don't have a list, but I remember seeing a lot on BXT and many of CNL
>> ones specially for the PORT F ones.
>
> I had a quick look and couldn't find any.
oh, the BXT ones are using BXT_PHY_BASE...
but for the existent ones is the one that uses MMIO_PORT3:
_VLV_AUD_PORT_EN_B_DBG
>>> 0x62F34-0x62F30
4
>>> 0x62F30-0x62F20
16
and users of MMIO_PORT6 that I just merged on dinq:
CNL_PORT_PCS_DW1_LN0:
>>> 0x162804-0x162E04
-1536
>>> 0x162E04-0x162C04
512
>>> 0x162C04-0x162604
1536
>>> 0x162604-0x162404
512
>
>>
>> >
>> > > So picking from
>> > > a list of registers seems to be the more general approach
>> > > that covers all cases.
>> > >
>> > > So let's make MMIO_PORT use _PICK directly so we don't
>> >
>> > How much is this going to blow up the code size?
>>
>> well, the initial idea I believe it was to reduce avoiding few new
>> macros, but during the implementation I saw that we had to actually
>> list more registers and indeed this end up increasing the size.
>>
>> >
>> > > need to create MMIO_PORT3 MMIO_PORT5 MMIO_PORT6 or
>> > > whatever number of different ports with different registers
>> > > that doesn't respect the gap.
>> > >
>> > > Cc: Jani Nikula <jani.nikula at intel.com>
>> > > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
>> > > ---
>> > > drivers/gpu/drm/i915/i915_reg.h | 57 +++++++++++++++++++++++++++++++++--------
>> > > 1 file changed, 46 insertions(+), 11 deletions(-)
>> > >
>> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> > > index b6d69e2..9a57a17 100644
>> > > --- a/drivers/gpu/drm/i915/i915_reg.h
>> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
>> > > @@ -57,9 +57,8 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
>> > > #define _TRANS(tran, a, b) ((a) + (tran)*((b)-(a)))
>> > > #define _MMIO_TRANS(tran, a, b) _MMIO(_TRANS(tran, a, b))
>> > > #define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
>> > > -#define _MMIO_PORT(port, a, b) _MMIO(_PORT(port, a, b))
>> > > +#define _MMIO_PORT(port, ...) _MMIO(_PICK(port, __VA_ARGS__))
>> > > #define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
>> > > -#define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
>> > > #define _PHY3(phy, ...) _PICK(phy, __VA_ARGS__)
>> > > #define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
>> > >
>> > > @@ -1576,7 +1575,8 @@ enum skl_disp_power_wells {
>> > > #define BXT_PHY_LANE_POWERDOWN_ACK (1 << 9)
>> > > #define BXT_PHY_LANE_ENABLED (1 << 8)
>> > > #define BXT_PHY_CTL(port) _MMIO_PORT(port, _BXT_PHY_CTL_DDI_A, \
>> > > - _BXT_PHY_CTL_DDI_B)
>> > > + _BXT_PHY_CTL_DDI_B, \
>> > > + _BXT_PHY_CTL_DDI_C)
>> > >
>> > > #define _PHY_CTL_FAMILY_EDP 0x64C80
>> > > #define _PHY_CTL_FAMILY_DDI 0x64C90
>> > > @@ -1595,7 +1595,9 @@ enum skl_disp_power_wells {
>> > > #define PORT_PLL_REF_SEL (1 << 27)
>> > > #define PORT_PLL_POWER_ENABLE (1 << 26)
>> > > #define PORT_PLL_POWER_STATE (1 << 25)
>> > > -#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, _PORT_PLL_B)
>> > > +#define BXT_PORT_PLL_ENABLE(port) _MMIO_PORT(port, _PORT_PLL_A, \
>> > > + _PORT_PLL_B, \
>> > > + _PORT_PLL_C)
>> > >
>> > > #define _PORT_PLL_EBB_0_A 0x162034
>> > > #define _PORT_PLL_EBB_0_B 0x6C034
>> > > @@ -2453,7 +2455,7 @@ enum skl_disp_power_wells {
>> > > #define _VLV_AUD_PORT_EN_B_DBG (VLV_DISPLAY_BASE + 0x62F20)
>> > > #define _VLV_AUD_PORT_EN_C_DBG (VLV_DISPLAY_BASE + 0x62F30)
>> > > #define _VLV_AUD_PORT_EN_D_DBG (VLV_DISPLAY_BASE + 0x62F34)
>> > > -#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT3((port) - PORT_B, \
>> > > +#define VLV_AUD_PORT_EN_DBG(port) _MMIO_PORT((port) - PORT_B, \
>> > > _VLV_AUD_PORT_EN_B_DBG, \
>> > > _VLV_AUD_PORT_EN_C_DBG, \
>> > > _VLV_AUD_PORT_EN_D_DBG)
>> >
>> > There's really no need to change all the platforms. So would probably be
>> > better to limit the PICK to where we actually need it.
>>
>> Ok, so, what about leave MMIO_PORT as is and create a MMIO_PICK for the
>> registers we need list? So we avoid creating one MMIO_PORT* for every
>> different number of ports.
>>
>> >
>> > > @@ -4821,7 +4823,10 @@ enum {
>> > > #define _DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320)
>> > > #define _DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324)
>> > >
>> > > -#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, _DPB_AUX_CH_CTL)
>> > > +#define DP_AUX_CH_CTL(port) _MMIO_PORT(port, _DPA_AUX_CH_CTL, \
>> > > + _DPB_AUX_CH_CTL, \
>> > > + _DPC_AUX_CH_CTL, \
>> > > + _DPD_AUX_CH_CTL)
>> > > #define DP_AUX_CH_DATA(port, i) _MMIO(_PORT(port, _DPA_AUX_CH_DATA1, _DPB_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
>> > >
>> > > #define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
>> > > @@ -7214,7 +7219,9 @@ enum {
>> > > #define _PCH_DPD_AUX_CH_DATA4 0xe4320
>> > > #define _PCH_DPD_AUX_CH_DATA5 0xe4324
>> > >
>> > > -#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_CTL, _PCH_DPC_AUX_CH_CTL)
>> > > +#define PCH_DP_AUX_CH_CTL(port) _MMIO_PORT((port) - PORT_B, \
>> > > + _PCH_DPB_AUX_CH_CTL, \
>> > > + _PCH_DPC_AUX_CH_CTL)
>> > > #define PCH_DP_AUX_CH_DATA(port, i) _MMIO(_PORT((port) - PORT_B, _PCH_DPB_AUX_CH_DATA1, _PCH_DPC_AUX_CH_DATA1) + (i) * 4) /* 5 registers */
>> >
>> > You changed CTL but didn't change DATA. Why?
>> >
>> > Also note that port D is missing from CTL now!
>> >
>> > >
>> > > /* CPT */
>> > > @@ -7844,7 +7851,14 @@ enum {
>> > > /* DisplayPort Transport Control */
>> > > #define _DP_TP_CTL_A 0x64040
>> > > #define _DP_TP_CTL_B 0x64140
>> > > -#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B)
>> > > +#define _DP_TP_CTL_C 0x64240
>> > > +#define _DP_TP_CTL_D 0x64340
>> > > +#define _DP_TP_CTL_E 0x64440
>> > > +#define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, \
>> > > + _DP_TP_CTL_B, \
>> > > + _DP_TP_CTL_C, \
>> > > + _DP_TP_CTL_D, \
>> > > + _DP_TP_CTL_E)
>> > > #define DP_TP_CTL_ENABLE (1<<31)
>> > > #define DP_TP_CTL_MODE_SST (0<<27)
>> > > #define DP_TP_CTL_MODE_MST (1<<27)
>> > > @@ -7862,7 +7876,14 @@ enum {
>> > > /* DisplayPort Transport Status */
>> > > #define _DP_TP_STATUS_A 0x64044
>> > > #define _DP_TP_STATUS_B 0x64144
>> > > -#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B)
>> > > +#define _DP_TP_STATUS_C 0x64244
>> > > +#define _DP_TP_STATUS_D 0x64344
>> > > +#define _DP_TP_STATUS_E 0x64444
>> > > +#define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, \
>> > > + _DP_TP_STATUS_B, \
>> > > + _DP_TP_STATUS_C, \
>> > > + _DP_TP_STATUS_D, \
>> > > + _DP_TP_STATUS_E)
>> > > #define DP_TP_STATUS_IDLE_DONE (1<<25)
>> > > #define DP_TP_STATUS_ACT_SENT (1<<24)
>> > > #define DP_TP_STATUS_MODE_STATUS_MST (1<<23)
>> > > @@ -7874,7 +7895,14 @@ enum {
>> > > /* DDI Buffer Control */
>> > > #define _DDI_BUF_CTL_A 0x64000
>> > > #define _DDI_BUF_CTL_B 0x64100
>> > > -#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
>> > > +#define _DDI_BUF_CTL_C 0x64200
>> > > +#define _DDI_BUF_CTL_D 0x64300
>> > > +#define _DDI_BUF_CTL_E 0x64400
>> > > +#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, \
>> > > + _DDI_BUF_CTL_B, \
>> > > + _DDI_BUF_CTL_C, \
>> > > + _DDI_BUF_CTL_D, \
>> > > + _DDI_BUF_CTL_E)
>> > > #define DDI_BUF_CTL_ENABLE (1<<31)
>> > > #define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
>> > > #define DDI_BUF_EMP_MASK (0xf<<24)
>> > > @@ -7973,7 +8001,14 @@ enum {
>> > > /* Port clock selection */
>> > > #define _PORT_CLK_SEL_A 0x46100
>> > > #define _PORT_CLK_SEL_B 0x46104
>> > > -#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B)
>> > > +#define _PORT_CLK_SEL_C 0x46108
>> > > +#define _PORT_CLK_SEL_D 0x4610C
>> > > +#define _PORT_CLK_SEL_E 0x46110
>> > > +#define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, \
>> > > + _PORT_CLK_SEL_B, \
>> > > + _PORT_CLK_SEL_C, \
>> > > + _PORT_CLK_SEL_D, \
>> > > + _PORT_CLK_SEL_E)
>> > > #define PORT_CLK_SEL_LCPLL_2700 (0<<29)
>> > > #define PORT_CLK_SEL_LCPLL_1350 (1<<29)
>> > > #define PORT_CLK_SEL_LCPLL_810 (2<<29)
>> > > _______________________________________________
>> > > Intel-gfx mailing list
>> > > Intel-gfx at lists.freedesktop.org
>> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>> >
>>
>
> --
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
More information about the Intel-gfx
mailing list