[Intel-gfx] [PATCH i-g-t v2] tests/chamelium: Add common suspend and hibernate tests for DP and HDMI
Lyude Paul
lyude at redhat.com
Fri Jun 16 23:28:09 UTC 2017
On Fri, 2017-06-16 at 17:17 +0300, Paul Kocialkowski wrote:
> This adds two new tests: common-hpd-after-suspend and
> common-hpd-after-hibernate that are aimed at testing HPD change during
> suspend/hibernate for both DP and HDMI, at the same time.
>
> The interest in bringing this test up is to reduce the time spent in
> testing, with the downside of less precision regarding the test's
> outcome. The per-connector tests are still available to get a more
> precise idea of which connector causes a failure, when that happens.
>
> VGA is explicitly excluded from this test as there is currently no
> way of doing delayed hpd pulses for it.
>
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at linux.intel.com>
> ---
> tests/chamelium.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
>
> diff --git a/tests/chamelium.c b/tests/chamelium.c
> index 76b14e95..d569c8ee 100644
> --- a/tests/chamelium.c
> +++ b/tests/chamelium.c
> @@ -241,6 +241,80 @@ test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
> }
>
> static void
> +test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state state,
> + enum igt_suspend_test test)
> +{
> + struct udev_monitor *mon = igt_watch_hotplug();
> + struct chamelium_port *port;
> + int p;
> +
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + reset_state(data, port);
> +
> + igt_debug("Testing port %s\n", chamelium_port_get_name(port));
> + }
> +
> + igt_set_autoresume_delay(SUSPEND_RESUME_DELAY);
> + igt_flush_hotplugs(mon);
> +
> + /* Make sure we notice new connectors after resuming */
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + chamelium_async_hpd_pulse_start(data->chamelium, port, false,
> + SUSPEND_RESUME_DELAY / 2);
> + }
> +
> + igt_system_suspend_autoresume(state, test);
> + chamelium_async_hpd_pulse_finish(data->chamelium);
> +
> + igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> +
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + igt_assert_eq(reprobe_connector(data, port),
> + DRM_MODE_CONNECTED);
> + }
> +
> + igt_flush_hotplugs(mon);
> +
> + /* Now make sure we notice disconnected connectors after resuming */
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + chamelium_async_hpd_pulse_start(data->chamelium, port, true,
> + SUSPEND_RESUME_DELAY / 2);
> + }
> +
> + igt_system_suspend_autoresume(state, test);
> + chamelium_async_hpd_pulse_finish(data->chamelium);
> +
> + igt_assert(igt_hotplug_detected(mon, HOTPLUG_TIMEOUT));
> +
> + for (p = 0; p < data->port_count; p++) {
> + port = data->ports[p];
> + if (chamelium_port_get_type(port) == DRM_MODE_CONNECTOR_VGA)
> + continue;
> +
> + igt_assert_eq(reprobe_connector(data, port),
> + DRM_MODE_DISCONNECTED);
> + }
> +
> + igt_cleanup_hotplug(mon);
> +}
> +
> +static void
For smaller bits of code this isn't a big deal since we're talking
about tests here, but this is a lot of code to have for a single
function like this. Mind splitting this into something like (feel free
to take some liberty with the function naming)
test_suspend_resume_hpd(data_t *data, enum igt_suspend_state state, enum igt_suspend_test test)
→ try_suspend_resume_hpd(data_t *data, enum igt_suspend_state state, enum igt_suspend_test test, bool connected)
Other then that, looks good. With the changes mentioned:
Reviewed-by: Lyude Paul <lyude at redhat.com>
> test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
> enum igt_suspend_state state,
> enum igt_suspend_test test,
> @@ -750,6 +824,18 @@ igt_main
> test_hpd_without_ddc(&data, port);
> }
>
> + igt_subtest_group {
> + igt_subtest("common-hpd-after-suspend")
> + test_suspend_resume_hpd_common(&data,
> + SUSPEND_STATE_MEM,
> + SUSPEND_TEST_NONE);
> +
> + igt_subtest("common-hpd-after-hibernate")
> + test_suspend_resume_hpd_common(&data,
> + SUSPEND_STATE_DISK,
> + SUSPEND_TEST_DEVICES);
> + }
> +
> igt_fixture {
> close(data.drm_fd);
> }
--
Cheers,
Lyude
More information about the Intel-gfx
mailing list