[Intel-gfx] [PATCH] drm/i915/cnl: Fix RMW on ddi vswing sequence.
Rodrigo Vivi
rodrigo.vivi at intel.com
Mon Jun 19 17:08:01 UTC 2017
Paulo noticed that we were missing few bits clear
before writing values back to the register on
these RMW MMIO operations.
v2: Remove "POST_" from CURSOR_COEFF_MASK. (Paulo).
v3: Remove unnecessary braces. (Jani).
Fixes: cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Manasi Navare <manasi.d.navare at intel.com>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 9 +++++++++
drivers/gpu/drm/i915/intel_ddi.c | 7 +++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index bd535f1..c8647cf 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1764,8 +1764,11 @@ enum skl_disp_power_wells {
_CNL_PORT_TX_DW2_LN0_AE, \
_CNL_PORT_TX_DW2_LN0_F)
#define SWING_SEL_UPPER(x) ((x >> 3) << 15)
+#define SWING_SEL_UPPER_MASK (1 << 15)
#define SWING_SEL_LOWER(x) ((x & 0x7) << 11)
+#define SWING_SEL_LOWER_MASK (0x7 << 11)
#define RCOMP_SCALAR(x) ((x) << 0)
+#define RCOMP_SCALAR_MASK (0xFF << 0)
#define _CNL_PORT_TX_DW4_GRP_AE 0x162350
#define _CNL_PORT_TX_DW4_GRP_B 0x1623D0
@@ -1795,8 +1798,11 @@ enum skl_disp_power_wells {
_CNL_PORT_TX_DW4_LN0_F)
#define LOADGEN_SELECT (1 << 31)
#define POST_CURSOR_1(x) ((x) << 12)
+#define POST_CURSOR_1_MASK (0x3F << 12)
#define POST_CURSOR_2(x) ((x) << 6)
+#define POST_CURSOR_2_MASK (0x3F << 6)
#define CURSOR_COEFF(x) ((x) << 0)
+#define CURSOR_COEFF_MASK (0x3F << 6)
#define _CNL_PORT_TX_DW5_GRP_AE 0x162354
#define _CNL_PORT_TX_DW5_GRP_B 0x1623D4
@@ -1825,7 +1831,9 @@ enum skl_disp_power_wells {
#define TX_TRAINING_EN (1 << 31)
#define TAP3_DISABLE (1 << 29)
#define SCALING_MODE_SEL(x) ((x) << 18)
+#define SCALING_MODE_SEL_MASK (0x7 << 18)
#define RTERM_SELECT(x) ((x) << 3)
+#define RTERM_SELECT_MASK (0x7 << 3)
#define _CNL_PORT_TX_DW7_GRP_AE 0x16235C
#define _CNL_PORT_TX_DW7_GRP_B 0x1623DC
@@ -1852,6 +1860,7 @@ enum skl_disp_power_wells {
_CNL_PORT_TX_DW7_LN0_AE, \
_CNL_PORT_TX_DW7_LN0_F)
#define N_SCALAR(x) ((x) << 24)
+#define N_SCALAR_MASK (0x7F << 24)
/* The spec defines this only for BXT PHY0, but lets assume that this
* would exist for PHY1 too if it had a second channel.
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index db80938..80e96f1 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1813,11 +1813,14 @@ static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv,
/* Set PORT_TX_DW5 Scaling Mode Sel to 010b. */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
+ val &= ~SCALING_MODE_SEL_MASK;
val |= SCALING_MODE_SEL(2);
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW2 */
val = I915_READ(CNL_PORT_TX_DW2_LN0(port));
+ val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
+ RCOMP_SCALAR_MASK);
val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
/* Rcomp scalar is fixed as 0x98 for every table entry */
@@ -1828,6 +1831,8 @@ static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv,
/* We cannot write to GRP. It would overrite individual loadgen */
for (ln = 0; ln < 4; ln++) {
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
+ val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
+ CURSOR_COEFF_MASK);
val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
@@ -1837,12 +1842,14 @@ static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv,
/* Program PORT_TX_DW5 */
/* All DW5 values are fixed for every table entry */
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
+ val &= ~RTERM_SELECT_MASK;
val |= RTERM_SELECT(6);
val |= TAP3_DISABLE;
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
/* Program PORT_TX_DW7 */
val = I915_READ(CNL_PORT_TX_DW7_LN0(port));
+ val &= ~N_SCALAR_MASK;
val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val);
}
--
1.9.1
More information about the Intel-gfx
mailing list