[Intel-gfx] [PATCH] BUG-REPORT: snd-hda: hacked-together EPROBE_DEFER support

[Takashi Iwai]

On Wed, 21 Jun 2017 17:23:57 +0200,
Chris Wilson wrote:
> 
> Quoting Daniel Vetter (2017-06-21 16:08:54)
> > So back when the i915 power well support landed in
> > 
> > commit 99a2008d0b32d72dfc2a54e7be1eb698dd2e3bd6
> > Author: Wang Xingchao <xingchao.wang at linux.intel.com>
> > Date:   Thu May 30 22:07:10 2013 +0800
> > 
> >     ALSA: hda - Add power-welll support for haswell HDA
> > 
> > the logic to handle the cross-module depencies was hand-rolled using a
> > async work item, and that just doesn't work.
> > 
> > The correct way to handle cross-module deps is either:
> > - request_module + failing when the other module isn't there
> > 
> > OR
> > 
> > - failing the module load with EPROBE_DEFER.
> > 
> > You can't mix them, if you do then the entire load path just
> > busy-spins blowing through cpu cycles forever with no way to stop
> > this.
> > 
> > snd-hda-intel does mix it, because the hda codec drivers are loaded
> > using request_module, but the i915 depency is handled using
> > PROBE_DEFER (or well, should be, but I haven't found any code at all).
> > This is a major pain when trying to debug i915 load failures.
> > 
> > This patch here is a horrible hackish attempt at somewhat correctly
> > wriing EPROBE_DEFER through. Stuff that's missing:
> > - Check all the other places where load errors are conveniently
> >   dropped on the floor.
> > - Also fix up the firmware_cb path.
> > - Drop the debug noise I've left in to make it clear this isn't
> >   anything for merging.
> 
> This tames "hdaudio hdaudioC0D0: Unable to bind the codec" which was
> continuously spewing previously, and now the system is usable again.

Could you give a failing scenario?  I'm not opposing to the suggested
solution, we need to fix the mess in anyway, but I just would like to
know how to trigger the problem easily.


thanks,

Takashi