[Intel-gfx] [PATCH i-g-t 7/7] tests/chamelium: Disconnect connectors without extra reset

[Paul Kocialkowski]

This removes the reset call from the reset_state function and renames it
to disconnect_connector. Since a call to reset is already done in
chamelium_init, there is no need to do an extra reset in each test.

This allows reducing the execution time a bit.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski at linux.intel.com>
---
 tests/chamelium.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/tests/chamelium.c b/tests/chamelium.c
index 01ae4cd7..7d6893da 100644
--- a/tests/chamelium.c
+++ b/tests/chamelium.c
@@ -144,17 +144,17 @@ wait_for_connector(data_t *data, struct chamelium_port *port,
 }
 
 static void
-reset_state(data_t *data, struct chamelium_port *port)
+disconnect_connector(data_t *data, struct chamelium_port *port)
 {
 	int p;
 
-	chamelium_reset(data->chamelium);
-
 	if (port) {
+		chamelium_unplug(data->chamelium, port);
 		wait_for_connector(data, port, DRM_MODE_DISCONNECTED, false);
 	} else {
 		for (p = 0; p < data->port_count; p++) {
 			port = data->ports[p];
+			chamelium_unplug(data->chamelium, port);
 			wait_for_connector(data, port, DRM_MODE_DISCONNECTED,
 					   false);
 		}
@@ -167,7 +167,7 @@ test_basic_hotplug(data_t *data, struct chamelium_port *port, int toggle_count)
 	struct udev_monitor *mon = igt_watch_hotplug();
 	int i;
 
-	reset_state(data, NULL);
+	disconnect_connector(data, NULL);
 	igt_hpd_storm_set_threshold(data->drm_fd, 0);
 
 	for (i = 0; i < toggle_count; i++) {
@@ -201,7 +201,7 @@ test_edid_read(data_t *data, struct chamelium_port *port,
 	    data->chamelium, port, false);
 	uint64_t edid_blob_id;
 
-	reset_state(data, port);
+	disconnect_connector(data, port);
 
 	chamelium_port_set_edid(data->chamelium, port, edid_id);
 	chamelium_plug(data->chamelium, port);
@@ -270,7 +270,7 @@ test_suspend_resume_hpd(data_t *data, struct chamelium_port *port,
 {
 	struct udev_monitor *mon = igt_watch_hotplug();
 
-	reset_state(data, port);
+	disconnect_connector(data, port);
 
 	/* Make sure we notice new connectors after resuming */
 	try_suspend_resume_hpd(data, port, state, test, mon, false);
@@ -294,7 +294,7 @@ test_suspend_resume_hpd_common(data_t *data, enum igt_suspend_state state,
 		igt_debug("Testing port %s\n", chamelium_port_get_name(port));
 	}
 
-	reset_state(data, NULL);
+	disconnect_connector(data, NULL);
 
 	/* Make sure we notice new connectors after resuming */
 	try_suspend_resume_hpd(data, NULL, state, test, mon, false);
@@ -315,7 +315,7 @@ test_suspend_resume_edid_change(data_t *data, struct chamelium_port *port,
 	struct udev_monitor *mon = igt_watch_hotplug();
 	int delay = chamelium_get_suspend_resume_delay(data->chamelium);
 
-	reset_state(data, port);
+	disconnect_connector(data, port);
 
 	igt_set_autoresume_delay(delay);
 
@@ -585,7 +585,7 @@ test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
 {
 	struct udev_monitor *mon = igt_watch_hotplug();
 
-	reset_state(data, port);
+	disconnect_connector(data, port);
 	igt_flush_hotplugs(mon);
 
 	/* Disable the DDC on the connector and make sure we still get a
@@ -607,7 +607,7 @@ test_hpd_storm_detect(data_t *data, struct chamelium_port *port, int width)
 	int count = 0;
 
 	igt_require_hpd_storm_ctl(data->drm_fd);
-	reset_state(data, port);
+	disconnect_connector(data, port);
 
 	igt_hpd_storm_set_threshold(data->drm_fd, 1);
 	chamelium_fire_hpd_pulses(data->chamelium, port, width, 10);
@@ -632,7 +632,7 @@ static void
 test_hpd_storm_disable(data_t *data, struct chamelium_port *port, int width)
 {
 	igt_require_hpd_storm_ctl(data->drm_fd);
-	reset_state(data, port);
+	disconnect_connector(data, port);
 
 	igt_hpd_storm_set_threshold(data->drm_fd, 0);
 	chamelium_fire_hpd_pulses(data->chamelium, port,
-- 
2.13.1