[Intel-gfx] [PATCH] drm/i915: reintroduce VLV/CHV PFI programming power domain workaround

[Gabriel Krisman Bertazi]

There are still cases on these platforms where an attempt is made to
configure the CDCLK while the power domain is off, like when coming back
from a suspend.  So the workaround below is still needed.

This effectively reverts commit 63ff30442519 ("drm/i915: Nuke the
VLV/CHV PFI programming power domain workaround").

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101517

Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman at collabora.co.uk>
---
 drivers/gpu/drm/i915/intel_cdclk.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index b8914db7d2e1..1241e5891b29 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -491,6 +491,14 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
 	int cdclk = cdclk_state->cdclk;
 	u32 val, cmd;
 
+	/* There are cases where we can end up here with power domains
+	 * off and a CDCLK frequency other than the minimum, like when
+	 * issuing a modeset without actually changing any display after
+	 * a system suspend.  So grab the PIPE-A domain, which covers
+	 * the HW blocks needed for the following programming.
+	 */
+	intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
 	if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
 		cmd = 2;
 	else if (cdclk == 266667)
@@ -549,6 +557,8 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
 	intel_update_cdclk(dev_priv);
 
 	vlv_program_pfi_credits(dev_priv);
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
 }
 
 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
@@ -568,6 +578,14 @@ static void chv_set_cdclk(struct drm_i915_private *dev_priv,
 		return;
 	}
 
+	/* There are cases where we can end up here with power domains
+	 * off and a CDCLK frequency other than the minimum, like when
+	 * issuing a modeset without actually changing any display after
+	 * a system suspend.  So grab the PIPE-A domain, which covers
+	 * the HW blocks needed for the following programming.
+	 */
+	intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
+
 	/*
 	 * Specs are full of misinformation, but testing on actual
 	 * hardware has shown that we just need to write the desired
@@ -590,6 +608,8 @@ static void chv_set_cdclk(struct drm_i915_private *dev_priv,
 	intel_update_cdclk(dev_priv);
 
 	vlv_program_pfi_credits(dev_priv);
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
 }
 
 static int bdw_calc_cdclk(int max_pixclk)
-- 
2.11.0