[Intel-gfx] [RESEND-CI v4 04/15] drm/edid: parse YCBCR 420 videomodes from EDID
Sharma, Shashank
shashank.sharma at intel.com
Fri Jun 30 05:17:48 UTC 2017
Regards
Shashank
On 6/27/2017 5:22 PM, Ville Syrjälä wrote:
> On Wed, Jun 21, 2017 at 04:04:02PM +0530, Shashank Sharma wrote:
>> HDMI 2.0 spec adds support for YCBCR420 sub-sampled output.
>> CEA-861-F adds two new blocks in EDID's CEA extension blocks,
>> to provide information about sink's YCBCR420 output capabilities.
>>
>> These blocks are:
>>
>> - YCBCR420vdb(YCBCR 420 video data block):
>> This block contains VICs of video modes, which can be sopported only
>> in YCBCR420 output mode (Not in RGB/YCBCR444/422. Its like a normal
>> SVD block, valid for YCBCR420 modes only.
>>
>> - YCBCR420cmdb(YCBCR 420 capability map data block):
>> This block gives information about video modes which can support
>> YCBCR420 output mode also (along with RGB,YCBCR444/422 etc) This
>> block contains a bitmap index of normal svd videomodes, which can
>> support YCBCR420 output too.
>> So if bit 0 from first vcb byte is set, first video mode in the svd
>> list can support YCBCR420 output too. Bit 1 means second video mode
>> from svd list can support YCBCR420 output too, and so on.
>>
>> This patch adds two bitmaps in display's hdmi_info structure, one each
>> for VCB and VDB modes. If the source is HDMI 2.0 capable, this patch
>> adds:
>> - VDB modes (YCBCR 420 only modes) in connector's mode list, also makes
>> an entry in the vdb_bitmap per vic.
>> - VCB modes (YCBCR 420 also modes) only entry in the vcb_bitmap.
>>
>> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
>> Cc: Jose Abreu <joabreu at synopsys.com>
>> Cc: Emil Velikov <emil.l.velikov at gmail.com>
>>
>> V2: Addressed
>> Review comments from Emil:
>> - Use 1ULL<<i instead of 1<<i to make sure the output is 64bit.
>> - Use the suggested method for updating dbmap.
>> - Add documentation for YCBCR420_vcb_map to fix kbuild warning.
>>
>> Review comments from Ville:
>> - Do not expose the YCBCR420 flags in uabi layer, keep it internal.
>> - Save a map of YCBCR420 modes for future reference.
>> - Check db length before trying to parse extended tag.
>> - Add a warning if there are > 64 modes in capability map block.
>> - Use y420cmdb in function names and macros while dealing with vcb
>> to be aligned with spec.
>> - Move the display information parsing block ahead of mode parsing
>> blocks.
>>
>> V3: Addressed design/review comments from Ville
>> - Do not add flags in video modes, else we have to expose them to user
>> - There should not be a UABI change, and kernel should detect the
>> choice of the output based on type of mode, and the bitmaps.
>> - Use standard bitops from kernel bitmap header, instead of calculating
>> bit positions manually.
>>
>> V4: Addressed review comments from Ville:
>> - s/ycbcr_420_vdb/y420vdb
>> - s/ycbcr_420_vcb/y420cmdb
>> - Be less verbose on description of do_y420vdb_modes
>> - Move newmode variable in the loop scope.
>> - Use svd_to_vic() to get a VIC, instead of 0x7f
>> - Remove bitmap description for CMDB modes & VDB modes
>> - Dont add connector->ycbcr_420_allowed check for cmdb modes
>> - Remove 'len' variable, in is_y420cmdb function, which is used
>> only once
>> - Add length check in is_y420vdb function
>> - Remove unnecessary if (!db) check in function parse_y420cmdb_bitmap
>> - Do not add print about YCBCR 420 modes
>> - Fix indentation in few places
>> - Move ycbcr420_dc_modes in next patch, where its used
>> - Add a separate patch for movement of drm_add_display_info()
>>
>> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
>> ---
>> drivers/gpu/drm/drm_edid.c | 157 +++++++++++++++++++++++++++++++++++++++++++-
>> include/drm/drm_connector.h | 20 ++++++
>> 2 files changed, 174 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>> index e2d1b30..8c7e73b 100644
>> --- a/drivers/gpu/drm/drm_edid.c
>> +++ b/drivers/gpu/drm/drm_edid.c
>> @@ -2781,7 +2781,9 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
>> #define VIDEO_BLOCK 0x02
>> #define VENDOR_BLOCK 0x03
>> #define SPEAKER_BLOCK 0x04
>> -#define VIDEO_CAPABILITY_BLOCK 0x07
>> +#define VIDEO_CAPABILITY_BLOCK 0x07
>> +#define VIDEO_DATA_BLOCK_420 0x0E
>> +#define VIDEO_CAP_BLOCK_Y420CMDB 0x0F
>> #define EDID_BASIC_AUDIO (1 << 6)
>> #define EDID_CEA_YCRCB444 (1 << 5)
>> #define EDID_CEA_YCRCB422 (1 << 4)
>> @@ -3153,15 +3155,79 @@ drm_display_mode_from_vic_index(struct drm_connector *connector,
>> return newmode;
>> }
>>
>> +/*
>> + * do_y420vdb_modes - Parse YCBCR 420 only modes
>> + * @connector: connector corresponding to the HDMI sink
>> + * @svds: start of the data block of CEA YCBCR 420 VDB
>> + * @len: length of the CEA YCBCR 420 VDB
>> + *
>> + * Parse the CEA-861-F YCBCR 420 Video Data Block (Y420VDB)
>> + * which contains modes which can be supported in YCBCR 420
>> + * output format only.
>> + */
>> +static int do_y420vdb_modes(struct drm_connector *connector,
>> + const u8 *svds, u8 svds_len)
>> +{
>> + int modes = 0, i;
>> + struct drm_device *dev = connector->dev;
>> + struct drm_display_info *info = &connector->display_info;
>> + struct drm_hdmi_info *hdmi = &info->hdmi;
>> +
>> + for (i = 0; i < svds_len; i++) {
>> + u8 vic = svd_to_vic(svds[i]);
>> + struct drm_display_mode *newmode;
>> +
>> + newmode = drm_mode_duplicate(dev, &edid_cea_modes[vic]);
>> + if (!newmode)
>> + break;
>> + bitmap_set(hdmi->y420_vdb_modes, vic, 1);
>> + drm_mode_probed_add(connector, newmode);
>> + modes++;
>> + }
>> +
>> + if (modes > 0)
>> + info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
>> + return modes;
>> +}
>> +
>> +/*
>> + * drm_add_cmdb_modes - Add a YCBCR 420 mode into bitmap
>> + * @connector: connector corresponding to the HDMI sink
>> + * @vic: CEA vic for the video mode to be added in the map
>> + *
>> + * Makes an entry for a videomode in the YCBCR 420 bitmap
>> + */
>> +static void
>> +drm_add_cmdb_modes(struct drm_connector *connector, u8 svd)
>> +{
>> + u8 vic = svd_to_vic(svd);
>> + struct drm_hdmi_info *hdmi = &connector->display_info.hdmi;
>> +
>> + bitmap_set(hdmi->y420_cmdb_modes, vic, 1);
>> +}
>> +
>> static int
>> do_cea_modes(struct drm_connector *connector, const u8 *db, u8 len)
>> {
>> int i, modes = 0;
>> + struct drm_hdmi_info *hdmi = &connector->display_info.hdmi;
>>
>> for (i = 0; i < len; i++) {
>> struct drm_display_mode *mode;
>> mode = drm_display_mode_from_vic_index(connector, db, len, i);
>> if (mode) {
>> + /*
>> + * YCBCR420 capability block contains a bitmap which
>> + * gives the index of CEA modes from CEA VDB, which
>> + * can support YCBCR 420 sampling output also (apart
>> + * from RGB/YCBCR444 etc).
>> + * For example, if the bit 0 in bitmap is set,
>> + * first mode in VDB can support YCBCR420 output too.
>> + * Add YCBCR420 modes only if sink is HDMI 2.0 capable.
>> + */
>> + if (test_bit(i, &hdmi->y420_cmdb_map))
>> + drm_add_cmdb_modes(connector, db[i]);
>> +
>> drm_mode_probed_add(connector, mode);
>> modes++;
>> }
>> @@ -3437,6 +3503,12 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
>> }
>>
>> static int
>> +cea_db_extended_tag(const u8 *db)
>> +{
>> + return db[1];
>> +}
>> +
>> +static int
>> cea_db_payload_len(const u8 *db)
>> {
>> return db[0] & 0x1f;
>> @@ -3497,9 +3569,78 @@ static bool cea_db_is_hdmi_forum_vsdb(const u8 *db)
>> return oui == HDMI_FORUM_IEEE_OUI;
>> }
>>
>> +static bool cea_db_is_y420cmdb(const u8 *db)
>> +{
>> +
>> + if (cea_db_tag(db) != VIDEO_CAPABILITY_BLOCK)
> Still would like to see that patch to clean up the current extended tag
> usage...
Yep, its on the way, running a bit loaded.
>> + return false;
>> +
>> + if (!cea_db_payload_len(db))
>> + return false;
>> +
>> + if (cea_db_extended_tag(db) != VIDEO_CAP_BLOCK_Y420CMDB)
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> +static bool cea_db_is_y420vdb(const u8 *db)
>> +{
>> + if (cea_db_tag(db) != VIDEO_CAPABILITY_BLOCK)
>> + return false;
>> +
>> + if (!cea_db_payload_len(db))
>> + return false;
>> +
>> + if (cea_db_extended_tag(db) != VIDEO_DATA_BLOCK_420)
>> + return false;
>> +
>> + return true;
>> +}
>> +
>> #define for_each_cea_db(cea, i, start, end) \
>> for ((i) = (start); (i) < (end) && (i) + cea_db_payload_len(&(cea)[(i)]) < (end); (i) += cea_db_payload_len(&(cea)[(i)]) + 1)
>>
>> +static void drm_parse_y420cmdb_bitmap(struct drm_connector *connector,
>> + const u8 *db)
>> +{
>> + struct drm_display_info *info = &connector->display_info;
>> + struct drm_hdmi_info *hdmi = &info->hdmi;
>> + u8 map_len = cea_db_payload_len(db) - 1;
>> + u8 count;
>> + u64 map = 0;
>> +
>> + if (map_len == 0) {
>> + /* All CEA modes support ycbcr420 sampling also.*/
>> + hdmi->y420_cmdb_map = U64_MAX;
>> + info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
>> + return;
>> + }
>> +
>> + /*
>> + * This map indicates which of the existing CEA block modes
>> + * from VDB can support YCBCR420 output too. So if bit=0 is
>> + * set, first mode from VDB can support YCBCR420 output too.
>> + * We will parse and keep this map, before parsing VDB itself
>> + * to avoid going through the same block again and again.
>> + *
>> + * Spec is not clear about max possible size of this block.
>> + * Clamping max bitmap block size at 8 bytes. Every byte can
>> + * address 8 CEA modes, in this way this map can address
>> + * 8*8 = first 64 SVDs.
>> + */
>> + if (WARN_ON_ONCE(map_len > 8))
>> + map_len = 8;
>> +
>> + for (count = 0; count < map_len; count++)
>> + map |= (u64)db[2 + count] << (8 * count);
>> +
>> + if (map)
>> + info->color_formats |= DRM_COLOR_FORMAT_YCRCB420;
>> +
>> + hdmi->y420_cmdb_map = map;
>> +}
>> +
>> static int
>> add_cea_modes(struct drm_connector *connector, struct edid *edid)
>> {
>> @@ -3522,10 +3663,17 @@ add_cea_modes(struct drm_connector *connector, struct edid *edid)
>> video = db + 1;
>> video_len = dbl;
>> modes += do_cea_modes(connector, video, dbl);
>> - }
>> - else if (cea_db_is_hdmi_vsdb(db)) {
>> + } else if (cea_db_is_hdmi_vsdb(db)) {
>> hdmi = db;
>> hdmi_len = dbl;
>> + } else if (cea_db_is_y420vdb(db) &&
>> + connector->ycbcr_420_allowed) {
>> + const u8 *vdb420 = &db[2];
>> +
>> + /* Add 4:2:0(only) modes present in EDID */
>> + modes += do_y420vdb_modes(connector,
>> + vdb420,
>> + dbl - 1);
>> }
>> }
>> }
>> @@ -4206,6 +4354,8 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>> drm_parse_hdmi_vsdb_video(connector, db);
>> if (cea_db_is_hdmi_forum_vsdb(db))
>> drm_parse_hdmi_forum_vsdb(connector, db);
>> + if (cea_db_is_y420cmdb(db))
>> + drm_parse_y420cmdb_bitmap(connector, db);
>> }
>> }
>>
>> @@ -4460,6 +4610,7 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
>> num_modes += add_cea_modes(connector, edid);
>> num_modes += add_alternate_cea_modes(connector, edid);
>> num_modes += add_displayid_detailed_modes(connector, edid);
>> +
>> if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)
>> num_modes += add_inferred_modes(connector, edid);
>>
>> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
>> index 7493fd3..ce2212d 100644
>> --- a/include/drm/drm_connector.h
>> +++ b/include/drm/drm_connector.h
>> @@ -137,6 +137,25 @@ struct drm_scdc {
>> struct drm_hdmi_info {
>> /** @scdc: sink's scdc support and capabilities */
>> struct drm_scdc scdc;
>> +
>> + /**
>> + * @y420_vdb_modes: bitmap of modes which can support ycbcr420
>> + * output only (not normal RGB/YCBCR444/422 outputs). There are total
>> + * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
>> + * upto 128 VICs;
>> + */
>> + unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
>> +
>> + /**
>> + * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
>> + * output also, along with normal HDMI outputs. There are total 107
>> + * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
>> + * 128 VICs;
>> + */
>> + unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
>> +
>> + /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
>> + unsigned long y420_cmdb_map;
> u64, otherwise it's busted on 32bit machines.
Got it.
>
> Mostl this looks pretty good. I think the main problem is the lack of
> mode validation that would reject the 4:2:0 only modes if not supported
> by the driver/device. I guess that's in a later patch?
Yep, its the next patch in the series.
> If so we need to
> reorder the series a bit to avoid regeressions.
That patch uses parameters added in this patch, to detect the 4:2:0 only
modes. So cant make it before this patch.
Let me see what best can I do on the reordering.
- Shashank
>> };
>>
>> /**
>> @@ -200,6 +219,7 @@ struct drm_display_info {
>> #define DRM_COLOR_FORMAT_RGB444 (1<<0)
>> #define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
>> #define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
>> +#define DRM_COLOR_FORMAT_YCRCB420 (1<<3)
>>
>> /**
>> * @color_formats: HDMI Color formats, selects between RGB and YCrCb
>> --
>> 2.7.4
More information about the Intel-gfx
mailing list