[Intel-gfx] [GLK MIPI DSI V7] drm/i915/glk: Add MIPIIO Enable/disable sequence

Chauhan, Madhav madhav.chauhan at intel.com
Wed Mar 1 18:48:22 UTC 2017


> -----Original Message-----
> From: Nikula, Jani
> Sent: Wednesday, March 1, 2017 7:44 PM
> To: Chauhan, Madhav <madhav.chauhan at intel.com>; intel-
> gfx at lists.freedesktop.org
> Cc: Conselvan De Oliveira, Ander <ander.conselvan.de.oliveira at intel.com>;
> Shankar, Uma <uma.shankar at intel.com>; Mukherjee, Indranil
> <indranil.mukherjee at intel.com>; Saarinen, Jani <jani.saarinen at intel.com>;
> Kamath, Sunil <sunil.kamath at intel.com>; Deepak M
> <m.deepak at intel.com>; Chauhan, Madhav <madhav.chauhan at intel.com>
> Subject: Re: [GLK MIPI DSI V7] drm/i915/glk: Add MIPIIO Enable/disable
> sequence
> 
> On Wed, 01 Mar 2017, Madhav Chauhan <madhav.chauhan at intel.com>
> wrote:
> > From: Deepak M <m.deepak at intel.com>
> >
> > v2: Addressed Jani's Review comments(renamed bit field macros)
> > v3: Jani's Review comment for aligning code to platforms and added
> > wrapper functions.
> > v4: Corrected enable/disable seuqence as per BSPEC
> > v5: Corrected waiting twice for same bit (Review comments: Jani)
> > v6: Rebased to Han's patches(dsi restructuring code)
> >
> > Signed-off-by: Deepak M <m.deepak at intel.com>
> > Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_dsi.c | 206
> > ++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 195 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index 20ed799..8e97bae3 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -357,6 +357,109 @@ static bool intel_dsi_compute_config(struct
> intel_encoder *encoder,
> >  	return true;
> >  }
> >
> > +static void glk_dsi_device_ready(struct intel_encoder *encoder) {
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > +	enum port port;
> > +	u32 tmp, val;
> > +
> > +	/* Set the MIPI mode
> > +	 * If MIPI_Mode is off, then writing to LP_Wake bit is not reflecting.
> > +	 * Power ON MIPI IO first and then write into IO reset and LP wake
> bits
> > +	 */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		tmp = I915_READ(MIPI_CTRL(port));
> > +		I915_WRITE(MIPI_CTRL(port), tmp | GLK_MIPIIO_ENABLE);
> > +	}
> > +
> > +	/* Put the IO into reset */
> > +	tmp = I915_READ(MIPI_CTRL(PORT_A));
> > +	tmp &= ~GLK_MIPIIO_RESET_RELEASED;
> > +	I915_WRITE(MIPI_CTRL(PORT_A), tmp);
> > +
> > +	/* Program LP Wake */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		tmp = I915_READ(MIPI_CTRL(port));
> > +		tmp |= GLK_LP_WAKE;
> > +		I915_WRITE(MIPI_CTRL(port), tmp);
> > +	}
> > +
> > +	/* Wait for Pwr ACK */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +				MIPI_CTRL(port),
> GLK_MIPIIO_PORT_POWERED,
> > +				GLK_MIPIIO_PORT_POWERED, 20))
> > +			DRM_ERROR("MIPIO port is powergated\n");
> > +	}
> > +
> > +	/* Wait for MIPI PHY status bit to set */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +				MIPI_CTRL(port),
> GLK_PHY_STATUS_PORT_READY,
> > +				GLK_PHY_STATUS_PORT_READY, 20))
> > +			DRM_ERROR("PHY is not ON\n");
> > +	}
> > +
> > +	/* Get IO out of reset */
> > +	tmp = I915_READ(MIPI_CTRL(PORT_A));
> > +	I915_WRITE(MIPI_CTRL(PORT_A), tmp |
> GLK_MIPIIO_RESET_RELEASED);
> > +
> > +	/* Get IO out of Low power state*/
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (!(I915_READ(MIPI_DEVICE_READY(port)) &
> DEVICE_READY)) {
> > +			val = I915_READ(MIPI_DEVICE_READY(port));
> > +			val &= ~ULPS_STATE_MASK;
> > +			val |= DEVICE_READY;
> > +			I915_WRITE(MIPI_DEVICE_READY(port), val);
> > +			usleep_range(10, 15);
> > +		}
> > +
> > +		/* Enter ULPS */
> > +		val = I915_READ(MIPI_DEVICE_READY(port));
> > +		val &= ~ULPS_STATE_MASK;
> > +		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> > +		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > +
> > +		/* Wait for ULPS Not active */
> > +		if (intel_wait_for_register(dev_priv,
> > +				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
> > +				GLK_ULPS_NOT_ACTIVE, 20))
> 
> 
> Auch, I missed this. The if statement covers the next line, and my compiler
> didn't complain. I already pushed this, so please send a follow-up fix on top.

Done. Thanks for capturing this.

> 
> BR,
> Jani.
> 
> > +
> > +		/* Exit ULPS */
> > +		val = I915_READ(MIPI_DEVICE_READY(port));
> > +		val &= ~ULPS_STATE_MASK;
> > +		val |= (ULPS_STATE_EXIT | DEVICE_READY);
> > +		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > +
> > +		/* Enter Normal Mode */
> > +		val = I915_READ(MIPI_DEVICE_READY(port));
> > +		val &= ~ULPS_STATE_MASK;
> > +		val |= (ULPS_STATE_NORMAL_OPERATION | DEVICE_READY);
> > +		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > +
> > +		tmp = I915_READ(MIPI_CTRL(port));
> > +		tmp &= ~GLK_LP_WAKE;
> > +		I915_WRITE(MIPI_CTRL(port), tmp);
> > +	}
> > +
> > +	/* Wait for Stop state */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +				MIPI_CTRL(port),
> GLK_DATA_LANE_STOP_STATE,
> > +				GLK_DATA_LANE_STOP_STATE, 20))
> > +			DRM_ERROR("Date lane not in STOP state\n");
> > +	}
> > +
> > +	/* Wait for AFE LATCH */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +				BXT_MIPI_PORT_CTRL(port), AFE_LATCHOUT,
> > +				AFE_LATCHOUT, 20))
> > +			DRM_ERROR("D-PHY not entering LP-11 state\n");
> > +	}
> > +}
> > +
> >  static void bxt_dsi_device_ready(struct intel_encoder *encoder)  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> @@
> > -429,11 +532,79 @@ static void intel_dsi_device_ready(struct
> > intel_encoder *encoder)
> >
> >  	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> >  		vlv_dsi_device_ready(encoder);
> > -	else if (IS_GEN9_LP(dev_priv))
> > +	else if (IS_BROXTON(dev_priv))
> >  		bxt_dsi_device_ready(encoder);
> > +	else if (IS_GEMINILAKE(dev_priv))
> > +		glk_dsi_device_ready(encoder);
> >  }
> >
> > -static void intel_dsi_clear_device_ready(struct intel_encoder
> > *encoder)
> > +static void glk_dsi_enter_low_power_mode(struct intel_encoder
> > +*encoder) {
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > +	enum port port;
> > +	u32 val;
> > +
> > +	/* Enter ULPS */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		val = I915_READ(MIPI_DEVICE_READY(port));
> > +		val &= ~ULPS_STATE_MASK;
> > +		val |= (ULPS_STATE_ENTER | DEVICE_READY);
> > +		I915_WRITE(MIPI_DEVICE_READY(port), val);
> > +	}
> > +
> > +	/* Wait for MIPI PHY status bit to unset */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +					    MIPI_CTRL(port),
> > +					    GLK_PHY_STATUS_PORT_READY, 0,
> 20))
> > +			DRM_ERROR("PHY is not turning OFF\n");
> > +	}
> > +
> > +	/* Wait for Pwr ACK bit to unset */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +					    MIPI_CTRL(port),
> > +					    GLK_MIPIIO_PORT_POWERED, 0,
> 20))
> > +			DRM_ERROR("MIPI IO Port is not powergated\n");
> > +	}
> > +}
> > +
> > +static void glk_dsi_disable_mipi_io(struct intel_encoder *encoder) {
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > +	enum port port;
> > +	u32 tmp;
> > +
> > +	/* Put the IO into reset */
> > +	tmp = I915_READ(MIPI_CTRL(PORT_A));
> > +	tmp &= ~GLK_MIPIIO_RESET_RELEASED;
> > +	I915_WRITE(MIPI_CTRL(PORT_A), tmp);
> > +
> > +	/* Wait for MIPI PHY status bit to unset */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		if (intel_wait_for_register(dev_priv,
> > +					    MIPI_CTRL(port),
> > +					    GLK_PHY_STATUS_PORT_READY, 0,
> 20))
> > +			DRM_ERROR("PHY is not turning OFF\n");
> > +	}
> > +
> > +	/* Clear MIPI mode */
> > +	for_each_dsi_port(port, intel_dsi->ports) {
> > +		tmp = I915_READ(MIPI_CTRL(port));
> > +		tmp &= ~GLK_MIPIIO_ENABLE;
> > +		I915_WRITE(MIPI_CTRL(port), tmp);
> > +	}
> > +}
> > +
> > +static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
> > +{
> > +	glk_dsi_enter_low_power_mode(encoder);
> > +	glk_dsi_disable_mipi_io(encoder);
> > +}
> > +
> > +static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> >  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@
> > -670,6 +841,17 @@ static void intel_dsi_pre_disable(struct intel_encoder
> *encoder,
> >  	}
> >  }
> >
> > +static void intel_dsi_clear_device_ready(struct intel_encoder
> > +*encoder) {
> > +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +
> > +	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv) ||
> > +	    IS_BROXTON(dev_priv))
> > +		vlv_dsi_clear_device_ready(encoder);
> > +	else if (IS_GEMINILAKE(dev_priv))
> > +		glk_dsi_clear_device_ready(encoder);
> > +}
> > +
> >  static void intel_dsi_post_disable(struct intel_encoder *encoder,
> >  				   struct intel_crtc_state *pipe_config,
> >  				   struct drm_connector_state *conn_state)
> @@ -1314,18 +1496,20
> > @@ static void intel_dsi_unprepare(struct intel_encoder *encoder)
> >  	enum port port;
> >  	u32 val;
> >
> > -	for_each_dsi_port(port, intel_dsi->ports) {
> > -		/* Panel commands can be sent when clock is in LP11 */
> > -		I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
> > +	if (!IS_GEMINILAKE(dev_priv)) {
> > +		for_each_dsi_port(port, intel_dsi->ports) {
> > +			/* Panel commands can be sent when clock is in LP11
> */
> > +			I915_WRITE(MIPI_DEVICE_READY(port), 0x0);
> >
> > -		intel_dsi_reset_clocks(encoder, port);
> > -		I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
> > +			intel_dsi_reset_clocks(encoder, port);
> > +			I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
> >
> > -		val = I915_READ(MIPI_DSI_FUNC_PRG(port));
> > -		val &= ~VID_MODE_FORMAT_MASK;
> > -		I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
> > +			val = I915_READ(MIPI_DSI_FUNC_PRG(port));
> > +			val &= ~VID_MODE_FORMAT_MASK;
> > +			I915_WRITE(MIPI_DSI_FUNC_PRG(port), val);
> >
> > -		I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
> > +			I915_WRITE(MIPI_DEVICE_READY(port), 0x1);
> > +		}
> >  	}
> >  }
> 
> --
> Jani Nikula, Intel Open Source Technology Center


More information about the Intel-gfx mailing list