[Intel-gfx] [PATCH v2] drm/i915/dp: Read link status more times when EQ not done

[Jani Nikula]

On Thu, 02 Mar 2017, "Lee, Shawn C" <shawn.c.lee at intel.com> wrote:
> From: "Lee, Shawn C" <shawn.c.lee at intel.com>
>
> Display driver read DPCD register 0x202, 0x203 and 0x204 to identify
> eDP sink status.If PSR exit is ongoing at eDP sink, and eDP source
> read these registers at the same time. Panel will report EQ & symbol
> lock not done. It will cause panel display flicking.
>
> Try to read link status more times if eDP EQ not done. Panel side
> request at least 1000us for fast link train while doing PSR exit.
> So wait more than 1000us then retrieve sink's status again.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99639
> TEST=Reboot DUT and no flicking on local display at login screen
>
> Cc: Cooper Chiou <cooper.chiou at intel.com>
> Cc: Wei Shun Chen <wei.shun.chang at intel.com>
> Cc: Gary C Wang <gary.c.wang at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
>
> Signed-off-by: Lee, Shawn C <shawn.c.lee at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c |   22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 024798a9c016..f6229d616971 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4225,6 +4225,7 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  {
>  	struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
>  	struct drm_device *dev = intel_dp_to_dev(intel_dp);
> +	struct drm_i915_private *dev_priv = dev->dev_private;
>  	u8 link_status[DP_LINK_STATUS_SIZE];
>  
>  	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
> @@ -4247,6 +4248,27 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
>  
>  	/* Retrain if Channel EQ or CR not ok */
>  	if (!drm_dp_channel_eq_ok(link_status, intel_dp->lane_count)) {
> +		if (is_edp(intel_dp) && dev_priv->psr.enabled) {
> +			u8 retry;
> +
> +			for (retry = 0; retry < 3; retry++) {
> +				/*
> +				 * EQ not ok may caused by fast link train while exit PSR active,
> +				 * wait at least 1000 us then read it again.
> +				 */
> +				DRM_DEBUG_KMS("%s: channel EQ not ok, retry = %d, DPCD 0x202 = 0x%x, 0x203 = 0x%x, 0x204 = 0x%x\n",
> +					intel_encoder->base.name, retry, link_status[0], link_status[1], link_status[2]);
> +				usleep_range(1000, 1500);
> +				if (!intel_dp_get_link_status(intel_dp, link_status)) {
> +					DRM_ERROR("Failed to get link status\n");
> +					return;
> +				}
> +
> +				if (drm_dp_channel_eq_ok(link_status, intel_dp->lane_count))
> +					return;
> +			}
> +		}

Sorry, I'm really not fond of how this basically duplicates the entire
intel_dp_check_link_status() function for the retry. Looks like you
should move the intel_dp_get_link_status() call closer to the
drm_dp_channel_eq_ok() call in the function, and abstract them into a
separate helper. Then call the helper in a loop, but only really repeat
for eDP and PSR active, settle for one try otherwise.

But before you do, please check with Rodrigo (Cc'd) if he thinks the
idea is sane to begin with.

BR,
Jani.



> +
>  		DRM_DEBUG_KMS("%s: channel EQ not ok, retraining\n",
>  			      intel_encoder->base.name);

-- 
Jani Nikula, Intel Open Source Technology Center