[Intel-gfx] [PATCH v2 3/3] drm/i915/userptr: Disallow wrapping GTT into a userptr
Chris Wilson
chris at chris-wilson.co.uk
Wed Mar 8 10:01:01 UTC 2017
On Wed, Mar 08, 2017 at 08:25:12AM +0000, Tvrtko Ursulin wrote:
>
> On 07/03/2017 20:58, Chris Wilson wrote:
> >If we allow the user to convert a GTT mmap address into a userptr, we
> >may end up in recursion hell, where currently we hit a mutex deadlock
> >but other possibilities include use-after-free during the
> >unbind/cancel_userptr.
> >
> >[ 143.203989] gem_userptr_bli D 0 902 898 0x00000000
> >[ 143.204054] Call Trace:
> >[ 143.204137] __schedule+0x511/0x1180
> >[ 143.204195] ? pci_mmcfg_check_reserved+0xc0/0xc0
> >[ 143.204274] schedule+0x57/0xe0
> >[ 143.204327] schedule_timeout+0x383/0x670
> >[ 143.204374] ? trace_hardirqs_on_caller+0x187/0x280
> >[ 143.204457] ? trace_hardirqs_on_thunk+0x1a/0x1c
> >[ 143.204507] ? usleep_range+0x110/0x110
> >[ 143.204657] ? irq_exit+0x89/0x100
> >[ 143.204710] ? retint_kernel+0x2d/0x2d
> >[ 143.204794] ? trace_hardirqs_on_caller+0x187/0x280
> >[ 143.204857] ? _raw_spin_unlock_irq+0x33/0x60
> >[ 143.204944] wait_for_common+0x1f0/0x2f0
> >[ 143.205006] ? out_of_line_wait_on_atomic_t+0x170/0x170
> >[ 143.205103] ? wake_up_q+0xa0/0xa0
> >[ 143.205159] ? flush_workqueue_prep_pwqs+0x15a/0x2c0
> >[ 143.205237] wait_for_completion+0x1d/0x20
> >[ 143.205292] flush_workqueue+0x2e9/0xbb0
> >[ 143.205339] ? flush_workqueue+0x163/0xbb0
> >[ 143.205418] ? __schedule+0x533/0x1180
> >[ 143.205498] ? check_flush_dependency+0x1a0/0x1a0
> >[ 143.205681] i915_gem_userptr_mn_invalidate_range_start+0x1c7/0x270 [i915]
> >[ 143.205865] ? i915_gem_userptr_dmabuf_export+0x40/0x40 [i915]
> >[ 143.205955] __mmu_notifier_invalidate_range_start+0xc6/0x120
> >[ 143.206044] ? __mmu_notifier_invalidate_range_start+0x51/0x120
> >[ 143.206123] zap_page_range_single+0x1c7/0x1f0
> >[ 143.206171] ? unmap_single_vma+0x160/0x160
> >[ 143.206260] ? unmap_mapping_range+0xa9/0x1b0
> >[ 143.206308] ? vma_interval_tree_subtree_search+0x75/0xd0
> >[ 143.206397] unmap_mapping_range+0x18f/0x1b0
> >[ 143.206444] ? zap_vma_ptes+0x70/0x70
> >[ 143.206524] ? __pm_runtime_resume+0x67/0xa0
> >[ 143.206723] i915_gem_release_mmap+0x1ba/0x1c0 [i915]
> >[ 143.206846] i915_vma_unbind+0x5c2/0x690 [i915]
> >[ 143.206925] ? __lock_is_held+0x52/0x100
> >[ 143.207076] i915_gem_object_set_tiling+0x1db/0x650 [i915]
> >[ 143.207236] i915_gem_set_tiling_ioctl+0x1d3/0x3b0 [i915]
> >[ 143.207377] ? i915_gem_set_tiling_ioctl+0x5/0x3b0 [i915]
> >[ 143.207457] drm_ioctl+0x36c/0x670
> >[ 143.207535] ? debug_lockdep_rcu_enabled.part.0+0x1a/0x30
> >[ 143.207730] ? i915_gem_object_set_tiling+0x650/0x650 [i915]
> >[ 143.207793] ? drm_getunique+0x120/0x120
> >[ 143.207875] ? __handle_mm_fault+0x996/0x14a0
> >[ 143.207939] ? vm_insert_page+0x340/0x340
> >[ 143.208028] ? up_write+0x28/0x50
> >[ 143.208086] ? vm_mmap_pgoff+0x160/0x190
> >[ 143.208163] do_vfs_ioctl+0x12c/0xa60
> >[ 143.208218] ? debug_lockdep_rcu_enabled+0x35/0x40
> >[ 143.208267] ? ioctl_preallocate+0x150/0x150
> >[ 143.208353] ? __do_page_fault+0x36a/0x6e0
> >[ 143.208400] ? mark_held_locks+0x23/0xc0
> >[ 143.208479] ? up_read+0x1f/0x40
> >[ 143.208526] ? entry_SYSCALL_64_fastpath+0x5/0xc6
> >[ 143.208669] ? __fget_light+0xa7/0xc0
> >[ 143.208747] SyS_ioctl+0x41/0x70
> >
> >To prevent the possibility of a deadlock, we defer scheduling the worker
> >until after we have proven that given the current mm, the userptr range
> >does not overlap a GGTT mmaping. If another thread tries to remap the
> >GGTT over the userptr before the worker is scheduled, it will be stopped
> >by its invalidate-range flushing the current work, before the deadlock
> >can occur.
> >
> >v2: Improve discussion of how we end up in the deadlock.
> >
> >Reported-by: Michał Winiarski <michal.winiarski at intel.com>
> >Testcase: igt/gem_userptr_blits/map-fixed-invalidate-gup
> >Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> >Cc: Michał Winiarski <michal.winiarski at intel.com>
> >Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> >---
> > drivers/gpu/drm/i915/i915_gem_userptr.c | 76 ++++++++++++++++++++++-----------
> > 1 file changed, 52 insertions(+), 24 deletions(-)
> >
> >diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
> >index dc9bf5282071..7addbf08bcb9 100644
> >--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
> >+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
> >@@ -488,6 +488,36 @@ __i915_gem_userptr_set_active(struct drm_i915_gem_object *obj,
> > return ret;
> > }
> >
> >+static bool overlaps_ggtt(struct drm_i915_gem_object *obj, struct mm_struct *mm)
> >+{
> >+ const struct vm_operations_struct *gem_vm_ops =
> >+ obj->base.dev->driver->gem_vm_ops;
> >+ unsigned long addr = obj->userptr.ptr;
> >+ const unsigned long end = addr + obj->base.size;
> >+ struct vm_area_struct *vma;
> >+
> >+ /* Check for a contiguous set of vma covering the userptr, if any
> >+ * are absent, they will EFAULT. More importantly if any point back
> >+ * to a drm_i915_gem_object GTT mmaping, we may trigger a deadlock
> >+ * between the deferred gup of this userptr and the object being
> >+ * unbound calling invalidate_range -> cancel_userptr.
> >+ */
> >+ for (vma = find_vma(mm, addr); vma; vma = vma->vm_next) {
> >+ if (vma->vm_start > addr) /* gap */
> >+ break;
>
> If I understand this correctly it is checking for more than ggtt, so
> would be tempted to either remove those parts of the checks or
> remove the helper to something like invalid_backing_store.
>
> Also, again if I understand it correctly, if the backing store was
> made out of two VMAs then wouldn't this return a false positive?
No. The vmas have to be contiguous or else the range covers an absent
page (which will EFAULT).
> In which case the first option from above sounds better to me. Just
> checking if there is any overlap with the GTT mapped areas in this
> function and leave the holes etc to get_user_pages.
It's just whilst I was here the contiguity check falls out :) Since we
also have to have the !vma check.
> >- active = false;
> > if (pinned < 0)
> > pages = ERR_PTR(pinned), pinned = 0;
> > else if (pinned < num_pages)
> >- pages = __i915_gem_userptr_get_pages_schedule(obj, &active);
> >+ pages = __i915_gem_userptr_get_pages_schedule(obj);
> > else
> > pages = __i915_gem_userptr_set_pages(obj, pvec, num_pages);
>
> I don't see _set_active on the fast gup path, maybe it is just too early? :)
Drat. No, I was just thinking about the worker.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
More information about the Intel-gfx
mailing list