[Intel-gfx] [PATCH 5/6] drm/i915: Use ktime to calculate rc0 residency

[Mika Kuoppala]

We have used cz timestamp register to gain a reference time wrt
to residency calculations. The residency counts are in cz clk ticks
(333Mhz clock) but for some reason the cz timestamp register gives
100us units. Perhaps for some other usage, the base-ten based values
are easier, but in residency calculations raw units would have been
the easiest.

As there is not much advantage of using base-ten clock through
a more costly punit access, take our reference times directly from
kernel clock.

v2: use ktime (Chris, Ville)

Cc: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h |  2 +-
 drivers/gpu/drm/i915/i915_irq.c | 10 ++++------
 drivers/gpu/drm/i915/i915_reg.h |  2 --
 3 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 0374e2e..6e14c7d 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1323,7 +1323,7 @@ struct vlv_s0ix_state {
 };
 
 struct intel_rps_ei {
-	u32 cz_clock;
+	ktime_t ktime;
 	u32 render_c0;
 	u32 media_c0;
 };
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 31f0d7c..f73d8db 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1076,7 +1076,7 @@ static void notify_ring(struct intel_engine_cs *engine)
 static void vlv_c0_read(struct drm_i915_private *dev_priv,
 			struct intel_rps_ei *ei)
 {
-	ei->cz_clock = vlv_punit_read(dev_priv, PUNIT_REG_CZ_TIMESTAMP);
+	ei->ktime = ktime_get_raw();
 	ei->render_c0 = I915_READ(VLV_RENDER_C0_COUNT);
 	ei->media_c0 = I915_READ(VLV_MEDIA_C0_COUNT);
 }
@@ -1096,19 +1096,17 @@ static u32 vlv_wa_c0_ei(struct drm_i915_private *dev_priv, u32 pm_iir)
 		return 0;
 
 	vlv_c0_read(dev_priv, &now);
-	if (now.cz_clock == 0)
-		return 0;
 
-	if (prev->cz_clock) {
+	if (prev->ktime) {
 		u64 time, c0;
 		u32 render, media;
 		unsigned int mul;
 
-		mul = VLV_CZ_CLOCK_TO_MILLI_SEC * 100; /* scale to threshold% */
+		mul = 1000 * 100; /* scale to threshold% */
 		if (I915_READ(VLV_COUNTER_CONTROL) & VLV_COUNT_RANGE_HIGH)
 			mul <<= 8;
 
-		time = now.cz_clock - prev->cz_clock;
+		time = ktime_us_delta(now.ktime, prev->ktime);
 		time *= dev_priv->czclk_freq;
 
 		/* Workload can be split between render + media,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5d88c35..04c8f69 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1140,8 +1140,6 @@ enum skl_disp_power_wells {
 #define 	VLV_BIAS_CPU_125_SOC_875 (6 << 2)
 #define 	CHV_BIAS_CPU_50_SOC_50 (3 << 2)
 
-#define VLV_CZ_CLOCK_TO_MILLI_SEC		100000
-
 /* vlv2 north clock has */
 #define CCK_FUSE_REG				0x8
 #define  CCK_FUSE_HPLL_FREQ_MASK		0x3
-- 
2.7.4