[Intel-gfx] [PATCH v4 2/2] drm: Add HDMI 2.0 VIC support for AVI info-frames

[Sharma, Shashank]

Regards

Shashank


On 3/23/2017 5:52 PM, Jose Abreu wrote:
> Hi Ville,
>
>
> On 23-03-2017 15:36, Ville Syrjälä wrote:
>> On Thu, Mar 23, 2017 at 05:14:19PM +0200, Shashank Sharma wrote:
>>> HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
>>> For any other mode, the VIC filed in AVI infoframes should be 0.
>>> HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
>>> extended to (VIC 1-107).
>>>
>>> This patch adds a bool input variable, which indicates if the connected
>>> sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
>>> HDMI 2.0 VIC to a HDMI 1.4 sink.
>> The spec is unfortunately vague when it comes to the CEA-861-F VIC
>> transmission when there is a corresponding HDMI VIC for the same mode.
>> I'm not sure if it's telling us to set both or just one depending on
>> whether we're transmitting 3D video or not. Or at least I can't parse
>> that information from the spec. Anyone have a better crystal ball
>> in their possession?
>>
> I've been working in HDMI receivers and this is what I've got in
> a comment:
>
> 1282
> /*
>
> 1283          * Update current VIC: When transmitting any
> extended video format
> 1284          * indicated through use of the HDMI_VIC field in
> the HDMI Vendor
> 1285          * Specific InfoFrame or any other format which is
> not described in
> 1286          * the above cases, an HDMI Source shall set the AVI
> InfoFrame VIC
> 1287          * field to
> zero.
>
> 1288          */
>
> This was directly taken from the spec, can't remember exactly
> were though.
>
> So, the VIC in AVIIF must be set to 0 and the HDMI_VIC field in
> VSIF shall be set to the HDMI 4k VIC.
>
> Best regards,
> Jose Miguel Abreu
Even my understanding of the two specs seems similar
If its a HDMI 1.4b monitor, 2D mode
     - VIC field in AVI_IF should be set to appropriate VIC [if VIC is 
not listed in CEA-861-D (VIC 1-64), make VIC=0]
If its a HDMI 1.4b monitor, 3D mode
     - VIC field in AVI_IF should be set to appropriate VIC, in 
conjunction with 3D_structure field in HDMI VSIF
If its a HDMI 2.0 monitor, 2D mode
     - VIC filed in the AVI_IF should be set to appropriate VIC (1-107)
If its a HDMI 2.0 monitor, 3D mode
     - VIC field in AVI_IF should be set to appropriate VIC, in 
conjunction with 3D_structure field in HDMI VSIF

Regards
Shashank