[Intel-gfx] [PATCH 37/67] drm/i915/cnl: Add registers related to voltage swing sequences.
Vivi, Rodrigo
rodrigo.vivi at intel.com
Tue May 23 19:18:45 UTC 2017
On Wed, 2017-05-17 at 17:59 -0700, Manasi Navare wrote:
> On Thu, Apr 06, 2017 at 12:15:33PM -0700, Rodrigo Vivi wrote:
> > This are the registers and bits needed for the voltage swing
> > sequence on Cannonlake.
> >
> > v2: Remove CL_DW5 that was wrongly defined.
> > v3: Use (1 << 1) instead of (1<<1) as Paulo suggested
> > Change DW2 swing sel upper and lower macros to do the
> > bit selection instead of definint a table that doesn't
> > match the spec. It is based on a Manasi version of it.
> > Credits-to: Manasi.
> >
> > Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 140 ++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 140 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 5777925..d4f7460 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1688,6 +1688,146 @@ enum skl_disp_power_wells {
> > #define OCL2_LDOFUSE_PWR_DIS (1 << 6)
> > #define BXT_PORT_CL1CM_DW30(phy) _BXT_PHY((phy), _PORT_CL1CM_DW30_BC)
> >
> > +#define _CNL_PORT_PCS_DW1_GRP_AE 0x162304
> > +#define _CNL_PORT_PCS_DW1_GRP_B 0x162384
> > +#define _CNL_PORT_PCS_DW1_GRP_C 0x162B04
> > +#define _CNL_PORT_PCS_DW1_GRP_D 0x162B84
> > +#define _CNL_PORT_PCS_DW1_GRP_F 0x162A04
> > +#define _CNL_PORT_PCS_DW1_LN0_AE 0x162404
> > +#define _CNL_PORT_PCS_DW1_LN0_B 0x162604
> > +#define _CNL_PORT_PCS_DW1_LN0_C 0x162C04
> > +#define _CNL_PORT_PCS_DW1_LN0_D 0x162E04
> > +#define _CNL_PORT_PCS_DW1_LN0_F 0x162804
> > +#define CNL_PORT_PCS_DW1_GRP(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_PCS_DW1_GRP_AE, \
> > + _CNL_PORT_PCS_DW1_GRP_B, \
> > + _CNL_PORT_PCS_DW1_GRP_C, \
> > + _CNL_PORT_PCS_DW1_GRP_D, \
> > + _CNL_PORT_PCS_DW1_GRP_AE, \
> > + _CNL_PORT_PCS_DW1_GRP_F)
> > +#define CNL_PORT_PCS_DW1_LN0(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_PCS_DW1_LN0_AE, \
> > + _CNL_PORT_PCS_DW1_LN0_B, \
> > + _CNL_PORT_PCS_DW1_LN0_C, \
> > + _CNL_PORT_PCS_DW1_LN0_D, \
> > + _CNL_PORT_PCS_DW1_LN0_AE, \
> > + _CNL_PORT_PCS_DW1_LN0_F)
> > +#define COMMON_KEEPER_EN (1 << 26)
> > +
> > +#define _CNL_PORT_TX_DW2_GRP_AE 0x162348
> > +#define _CNL_PORT_TX_DW2_GRP_B 0x1623C8
> > +#define _CNL_PORT_TX_DW2_GRP_C 0x162B48
> > +#define _CNL_PORT_TX_DW2_GRP_D 0x162BC8
> > +#define _CNL_PORT_TX_DW2_GRP_F 0x162A48
> > +#define _CNL_PORT_TX_DW2_LN0_AE 0x162448
> > +#define _CNL_PORT_TX_DW2_LN0_B 0x162648
> > +#define _CNL_PORT_TX_DW2_LN0_C 0x162C48
> > +#define _CNL_PORT_TX_DW2_LN0_D 0x162E48
> > +#define _CNL_PORT_TX_DW2_LN0_F 0x162A48
> > +#define CNL_PORT_TX_DW2_GRP(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW2_GRP_AE, \
> > + _CNL_PORT_TX_DW2_GRP_B, \
> > + _CNL_PORT_TX_DW2_GRP_C, \
> > + _CNL_PORT_TX_DW2_GRP_D, \
> > + _CNL_PORT_TX_DW2_GRP_AE, \
> > + _CNL_PORT_TX_DW2_GRP_F)
> > +#define CNL_PORT_TX_DW2_LN0(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW2_LN0_AE, \
> > + _CNL_PORT_TX_DW2_LN0_B, \
> > + _CNL_PORT_TX_DW2_LN0_C, \
> > + _CNL_PORT_TX_DW2_LN0_D, \
> > + _CNL_PORT_TX_DW2_LN0_AE, \
> > + _CNL_PORT_TX_DW2_LN0_F)
> > +#define SWING_SEL_UPPER(x) ((x >> 3) << 15)
> > +#define SWING_SEL_LOWER(x) ((x & 0x7) << 11)
> > +#define RCOMP_SCALAR(x) ((x) << 0)
> > +
> > +#define _CNL_PORT_TX_DW4_GRP_AE 0x162350
> > +#define _CNL_PORT_TX_DW4_GRP_B 0x1623D0
> > +#define _CNL_PORT_TX_DW4_GRP_C 0x162B50
> > +#define _CNL_PORT_TX_DW4_GRP_D 0x162BD0
> > +#define _CNL_PORT_TX_DW4_GRP_F 0x162A50
> > +#define _CNL_PORT_TX_DW4_LN0_AE 0x162450
> > +#define _CNL_PORT_TX_DW4_LN1_AE 0x1624D0
> > +#define _CNL_PORT_TX_DW4_LN0_B 0x162650
> > +#define _CNL_PORT_TX_DW4_LN0_C 0x162C50
> > +#define _CNL_PORT_TX_DW4_LN0_D 0x162E50
> > +#define _CNL_PORT_TX_DW4_LN0_F 0x162850
> > +#define CNL_PORT_TX_DW4_GRP(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW4_GRP_AE, \
> > + _CNL_PORT_TX_DW4_GRP_B, \
> > + _CNL_PORT_TX_DW4_GRP_C, \
> > + _CNL_PORT_TX_DW4_GRP_D, \
> > + _CNL_PORT_TX_DW4_GRP_AE, \
> > + _CNL_PORT_TX_DW4_GRP_F)
> > +#define CNL_PORT_TX_DW4_LN(port, ln) _MMIO_PORT6_LN(port, ln, \
> > + _CNL_PORT_TX_DW4_LN0_AE, \
> > + _CNL_PORT_TX_DW4_LN1_AE, \
> > + _CNL_PORT_TX_DW4_LN0_B, \
> > + _CNL_PORT_TX_DW4_LN0_C, \
> > + _CNL_PORT_TX_DW4_LN0_D, \
> > + _CNL_PORT_TX_DW4_LN0_AE, \
> > + _CNL_PORT_TX_DW4_LN0_F)
> > +#define LOADGEN_SELECT (1 << 31)
> > +#define POST_CURSOR_1(x) ((x) << 12)
> > +#define POST_CURSOR_2(x) ((x) << 6)
> > +#define CURSOR_COEFF(x) ((x) << 0)
> > +
> > +#define _CNL_PORT_TX_DW5_GRP_AE 0x162354
> > +#define _CNL_PORT_TX_DW5_GRP_B 0x1623D4
> > +#define _CNL_PORT_TX_DW5_GRP_C 0x162B54
> > +#define _CNL_PORT_TX_DW5_GRP_D 0x162BD4
> > +#define _CNL_PORT_TX_DW5_GRP_F 0x162A54
> > +#define _CNL_PORT_TX_DW5_LN0_AE 0x162454
> > +#define _CNL_PORT_TX_DW5_LN0_B 0x162654
> > +#define _CNL_PORT_TX_DW5_LN0_C 0x162C54
> > +#define _CNL_PORT_TX_DW5_LN0_D 0x162ED4
> > +#define _CNL_PORT_TX_DW5_LN0_F 0x162854
> > +#define CNL_PORT_TX_DW5_GRP(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW5_GRP_AE, \
> > + _CNL_PORT_TX_DW5_GRP_B, \
> > + _CNL_PORT_TX_DW5_GRP_C, \
> > + _CNL_PORT_TX_DW5_GRP_D, \
> > + _CNL_PORT_TX_DW5_GRP_AE, \
> > + _CNL_PORT_TX_DW5_GRP_F)
> > +#define CNL_PORT_TX_DW5_LN0(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW5_LN0_AE, \
> > + _CNL_PORT_TX_DW5_LN0_B, \
> > + _CNL_PORT_TX_DW5_LN0_C, \
> > + _CNL_PORT_TX_DW5_LN0_D, \
> > + _CNL_PORT_TX_DW5_LN0_AE, \
> > + _CNL_PORT_TX_DW5_LN0_F)
> > +#define TX_TRAINING_EN (1 << 31)
> > +#define TAP3_DISABLE (1 << 29)
> > +#define SCALING_MODE_SEL (2<<18)
>
> Even Scaling mode can be different for different platforms using the
> same set of registers. So instead of using a direct value,
> use SCALING_MODE_SEL(x) ((x) << 18)
agreed. I will change in the next version...
>
> Reviewed-by for everything else.
>
> Manasi
>
> > +#define RTERM_SELECT(x) ((x) << 3)
> > +
> > +#define _CNL_PORT_TX_DW7_GRP_AE 0x16235C
> > +#define _CNL_PORT_TX_DW7_GRP_B 0x1623DC
> > +#define _CNL_PORT_TX_DW7_GRP_C 0x162B5C
> > +#define _CNL_PORT_TX_DW7_GRP_D 0x162BDC
> > +#define _CNL_PORT_TX_DW7_GRP_F 0x162A5C
> > +#define _CNL_PORT_TX_DW7_LN0_AE 0x16245C
> > +#define _CNL_PORT_TX_DW7_LN0_B 0x16265C
> > +#define _CNL_PORT_TX_DW7_LN0_C 0x162C5C
> > +#define _CNL_PORT_TX_DW7_LN0_D 0x162EDC
> > +#define _CNL_PORT_TX_DW7_LN0_F 0x16285C
> > +#define CNL_PORT_TX_DW7_GRP(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW7_GRP_AE, \
> > + _CNL_PORT_TX_DW7_GRP_B, \
> > + _CNL_PORT_TX_DW7_GRP_C, \
> > + _CNL_PORT_TX_DW7_GRP_D, \
> > + _CNL_PORT_TX_DW7_GRP_AE, \
> > + _CNL_PORT_TX_DW7_GRP_F)
> > +#define CNL_PORT_TX_DW7_LN0(port) _MMIO_PORT6(port, \
> > + _CNL_PORT_TX_DW7_LN0_AE, \
> > + _CNL_PORT_TX_DW7_LN0_B, \
> > + _CNL_PORT_TX_DW7_LN0_C, \
> > + _CNL_PORT_TX_DW7_LN0_D, \
> > + _CNL_PORT_TX_DW7_LN0_AE, \
> > + _CNL_PORT_TX_DW7_LN0_F)
> > +#define N_SCALAR(x) ((x) << 24)
> > +
> > /* The spec defines this only for BXT PHY0, but lets assume that this
> > * would exist for PHY1 too if it had a second channel.
> > */
> > --
> > 1.9.1
> >
More information about the Intel-gfx
mailing list