[Intel-gfx] [PATCH] drm/doc: Polish irq helper documentation
Daniel Vetter
daniel.vetter at ffwll.ch
Wed May 31 09:22:53 UTC 2017
Pull a (much shorter) overview into drm_irq.c, and instead put the
callback documentation into in-line comments in drm_drv.h.
v2: Move the include stanzas back to the split-up patch (Stefan).
Cc: Stefan Agner <stefan at agner.ch>
Reviewed-by: Stefan Agner <stefan at agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
---
Documentation/gpu/drm-internals.rst | 54 -------------------------------------
drivers/gpu/drm/drm_irq.c | 30 +++++++++++++++++----
drivers/gpu/drm/drm_vblank.c | 3 +++
include/drm/drmP.h | 9 +++++--
include/drm/drm_drv.h | 33 +++++++++++++++++++++--
5 files changed, 66 insertions(+), 63 deletions(-)
diff --git a/Documentation/gpu/drm-internals.rst b/Documentation/gpu/drm-internals.rst
index dd28e39cf966..bece92258647 100644
--- a/Documentation/gpu/drm-internals.rst
+++ b/Documentation/gpu/drm-internals.rst
@@ -149,60 +149,6 @@ Device Instance and Driver Handling
Driver Load
-----------
-IRQ Registration
-~~~~~~~~~~~~~~~~
-
-The DRM core tries to facilitate IRQ handler registration and
-unregistration by providing :c:func:`drm_irq_install()` and
-:c:func:`drm_irq_uninstall()` functions. Those functions only
-support a single interrupt per device, devices that use more than one
-IRQs need to be handled manually.
-
-Managed IRQ Registration
-''''''''''''''''''''''''
-
-:c:func:`drm_irq_install()` starts by calling the irq_preinstall
-driver operation. The operation is optional and must make sure that the
-interrupt will not get fired by clearing all pending interrupt flags or
-disabling the interrupt.
-
-The passed-in IRQ will then be requested by a call to
-:c:func:`request_irq()`. If the DRIVER_IRQ_SHARED driver feature
-flag is set, a shared (IRQF_SHARED) IRQ handler will be requested.
-
-The IRQ handler function must be provided as the mandatory irq_handler
-driver operation. It will get passed directly to
-:c:func:`request_irq()` and thus has the same prototype as all IRQ
-handlers. It will get called with a pointer to the DRM device as the
-second argument.
-
-Finally the function calls the optional irq_postinstall driver
-operation. The operation usually enables interrupts (excluding the
-vblank interrupt, which is enabled separately), but drivers may choose
-to enable/disable interrupts at a different time.
-
-:c:func:`drm_irq_uninstall()` is similarly used to uninstall an
-IRQ handler. It starts by waking up all processes waiting on a vblank
-interrupt to make sure they don't hang, and then calls the optional
-irq_uninstall driver operation. The operation must disable all hardware
-interrupts. Finally the function frees the IRQ by calling
-:c:func:`free_irq()`.
-
-Manual IRQ Registration
-'''''''''''''''''''''''
-
-Drivers that require multiple interrupt handlers can't use the managed
-IRQ registration functions. In that case IRQs must be registered and
-unregistered manually (usually with the :c:func:`request_irq()` and
-:c:func:`free_irq()` functions, or their :c:func:`devm_request_irq()` and
-:c:func:`devm_free_irq()` equivalents).
-
-When manually registering IRQs, drivers must not set the
-DRIVER_HAVE_IRQ driver feature flag, and must not provide the
-irq_handler driver operation. They must set the :c:type:`struct
-drm_device <drm_device>` irq_enabled field to 1 upon
-registration of the IRQs, and clear it to 0 after unregistering the
-IRQs.
IRQ Helper Library
~~~~~~~~~~~~~~~~~~
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 28d736c3fcb4..3b04c25100ae 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -62,19 +62,39 @@
#include "drm_internal.h"
/**
+ * DOC: irq helpers
+ *
+ * The DRM core provides very simple support helpers to enable IRQ handling on a
+ * device through the drm_irq_install() and drm_irq_uninstall() functions. This
+ * only supports devices with a single interrupt on the main device stored in
+ * &drm_device.dev and set as the device paramter in drm_dev_alloc().
+ *
+ * These IRQ helpers are strictly optional. Drivers which roll their own only
+ * need to set &drm_device.irq_enabled to signal the DRM core that vblank
+ * interrupts are working. Since these helpers don't automatically clean up the
+ * requested interrupt like e.g. devm_request_irq() they're not really
+ * recommended.
+ */
+
+/**
* drm_irq_install - install IRQ handler
* @dev: DRM device
* @irq: IRQ number to install the handler for
*
* Initializes the IRQ related data. Installs the handler, calling the driver
- * irq_preinstall() and irq_postinstall() functions before and after the
- * installation.
+ * &drm_driver.irq_preinstall and &drm_driver.irq_postinstall functions before
+ * and after the installation.
*
* This is the simplified helper interface provided for drivers with no special
* needs. Drivers which need to install interrupt handlers for multiple
* interrupts must instead set &drm_device.irq_enabled to signal the DRM core
* that vblank interrupts are available.
*
+ * @irq must match the interrupt number that would be passed to request_irq(),
+ * if called directly instead of using this helper function.
+ *
+ * &drm_driver.irq_handler is called to handle the registered interrupt.
+ *
* Returns:
* Zero on success or a negative error code on failure.
*/
@@ -136,9 +156,9 @@ EXPORT_SYMBOL(drm_irq_install);
* drm_irq_uninstall - uninstall the IRQ handler
* @dev: DRM device
*
- * Calls the driver's irq_uninstall() function and unregisters the IRQ handler.
- * This should only be called by drivers which used drm_irq_install() to set up
- * their interrupt handler. Other drivers must only reset
+ * Calls the driver's &drm_driver.irq_uninstall function and unregisters the IRQ
+ * handler. This should only be called by drivers which used drm_irq_install()
+ * to set up their interrupt handler. Other drivers must only reset
* &drm_device.irq_enabled to false.
*
* Note that for kernel modesetting drivers it is a bug if this function fails.
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index 630dc26379b7..463e4d81fb0d 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -363,6 +363,9 @@ static void vblank_disable_fn(unsigned long arg)
* @dev: DRM device
*
* This function cleans up any resources allocated in drm_vblank_init.
+ *
+ * Drivers which don't use drm_irq_install() need to set &drm_device.irq_enabled
+ * themselves, to signal to the DRM core that vblank interrupts are enabled.
*/
void drm_vblank_cleanup(struct drm_device *dev)
{
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 2e0b76cceb97..39df16af7a4a 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -377,8 +377,13 @@ struct drm_device {
int last_context; /**< Last current context */
/*@} */
- /** \name VBLANK IRQ support */
- /*@{ */
+ /**
+ * @irq_enabled:
+ *
+ * Indicates that interrupt handling is enabled, specifically vblank
+ * handling. Drivers which don't use drm_irq_install() need to set this
+ * to true manually.
+ */
bool irq_enabled;
int irq;
diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
index ebb41688581b..f495eee01302 100644
--- a/include/drm/drm_drv.h
+++ b/include/drm/drm_drv.h
@@ -325,11 +325,40 @@ struct drm_driver {
struct timeval *vblank_time,
bool in_vblank_irq);
- /* these have to be filled in */
-
+ /**
+ * @irq_handler:
+ *
+ * Interrupt handler called when using drm_irq_install(). Not used by
+ * drivers which implement their own interrupt handling.
+ */
irqreturn_t(*irq_handler) (int irq, void *arg);
+
+ /**
+ * @irq_preinstall:
+ *
+ * Optional callback used by drm_irq_install() which is called before
+ * the interrupt handler is registered. This should be used to clear out
+ * any pending interrupts (from e.g. firmware based drives) and reset
+ * the interrupt handling registers.
+ */
void (*irq_preinstall) (struct drm_device *dev);
+
+ /**
+ * @irq_postinstall:
+ *
+ * Optional callback used by drm_irq_install() which is called after
+ * the interrupt handler is registered. This should be used to enable
+ * interrupt generation in the hardware.
+ */
int (*irq_postinstall) (struct drm_device *dev);
+
+ /**
+ * @irq_uninstall:
+ *
+ * Optional callback used by drm_irq_uninstall() which is called before
+ * the interrupt handler is unregistered. This should be used to disable
+ * interrupt generation in the hardware.
+ */
void (*irq_uninstall) (struct drm_device *dev);
/**
--
2.11.0
More information about the Intel-gfx
mailing list