[Intel-gfx] [PATCH v5 3/7] drm: Add support for a panel-orientation connector property
Hans de Goede
j.w.r.degoede at gmail.com
Sat Nov 4 14:08:24 UTC 2017
On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).
This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.
Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
Changes in v2:
-Rebased on 4.14-rc1
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
create and attach functions. The caller is expected to set
drm_display_info.panel_orientation before calling this, then this will
check for platform specific quirks overriding the panel_orientation and if
the panel_orientation is set after this then it will attach the property.
---
drivers/gpu/drm/Kconfig | 1 +
drivers/gpu/drm/drm_connector.c | 73 +++++++++++++++++++++++++++++++++++++++++
include/drm/drm_connector.h | 11 +++++++
include/drm/drm_mode_config.h | 7 ++++
include/uapi/drm/drm_mode.h | 7 ++++
5 files changed, 99 insertions(+)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 9d005ac98c2b..0b166e626eb6 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -7,6 +7,7 @@
menuconfig DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
+ select DRM_PANEL_ORIENTATION_QUIRKS
select HDMI
select FB_CMDLINE
select I2C
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 704fc8934616..129c83a84320 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -24,6 +24,7 @@
#include <drm/drm_connector.h>
#include <drm/drm_edid.h>
#include <drm/drm_encoder.h>
+#include <drm/drm_utils.h>
#include "drm_crtc_internal.h"
#include "drm_internal.h"
@@ -212,6 +213,8 @@ int drm_connector_init(struct drm_device *dev,
mutex_init(&connector->mutex);
connector->edid_blob_ptr = NULL;
connector->status = connector_status_unknown;
+ connector->display_info.panel_orientation =
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
drm_connector_get_cmdline_mode(connector);
@@ -664,6 +667,13 @@ static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
{ DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
};
+static const struct drm_prop_enum_list drm_panel_orientation_enum_list[] = {
+ { DRM_MODE_PANEL_ORIENTATION_NORMAL, "Normal" },
+ { DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP, "Upside Down" },
+ { DRM_MODE_PANEL_ORIENTATION_LEFT_UP, "Left Side Up" },
+ { DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, "Right Side Up" },
+};
+
static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
@@ -768,6 +778,18 @@ DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
*
* CRTC_ID:
* Mode object ID of the &drm_crtc this connector should be connected to.
+ *
+ * Connectors for LCD panels may also have one standardized property:
+ *
+ * panel orientation:
+ * On some devices the LCD panel is mounted in the casing in such a way
+ * that the up/top side of the panel does not match with the top side of
+ * the device. Userspace can use this property to check for this.
+ * Note that input coordinates from touchscreens (input devices with
+ * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
+ * coordinates, so if userspace rotates the picture to adjust for
+ * the orientation it must also apply the same transformation to the
+ * touchscreen input coordinates.
*/
int drm_connector_create_standard_properties(struct drm_device *dev)
@@ -1234,6 +1256,57 @@ void drm_mode_connector_set_link_status_property(struct drm_connector *connector
}
EXPORT_SYMBOL(drm_mode_connector_set_link_status_property);
+/**
+ * drm_connector_init_panel_orientation_property -
+ * initialize the connecters panel_orientation property
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function should only be called for built-in panels, after setting
+ * connector->display_info.panel_orientation first (if known).
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector, int width, int height)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_display_info *info = &connector->display_info;
+ struct drm_property *prop;
+ int orientation_quirk;
+
+ orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+ if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ info->panel_orientation = orientation_quirk;
+
+ if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ return 0;
+
+ prop = dev->mode_config.panel_orientation_property;
+ if (!prop) {
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+ "panel orientation",
+ drm_panel_orientation_enum_list,
+ ARRAY_SIZE(drm_panel_orientation_enum_list));
+ if (!prop)
+ return -ENOMEM;
+
+ dev->mode_config.panel_orientation_property = prop;
+ }
+
+ drm_object_attach_property(&connector->base, prop,
+ info->panel_orientation);
+ return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index b4285c40e1e4..e6883065a461 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -222,6 +222,15 @@ struct drm_display_info {
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
#define DRM_COLOR_FORMAT_YCRCB420 (1<<3)
+ /**
+ * @panel_orientation: Read only connector property for built-in panels,
+ * indicating the orientation of the panel vs the device's casing.
+ * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
+ * fb to compensate and gets exported as prop to userspace.
+ */
+ int panel_orientation;
+
/**
* @color_formats: HDMI Color formats, selects between RGB and YCrCb
* modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
@@ -1019,6 +1028,8 @@ int drm_mode_connector_update_edid_property(struct drm_connector *connector,
const struct edid *edid);
void drm_mode_connector_set_link_status_property(struct drm_connector *connector,
uint64_t link_status);
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector, int width, int height);
/**
* struct drm_tile_group - Tile group metadata
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 0b4ac2ebc610..7d4ee1726e0a 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -728,6 +728,13 @@ struct drm_mode_config {
*/
struct drm_property *suggested_y_property;
+ /**
+ * @panel_orientation_property: Optional connector property indicating
+ * how the lcd-panel is mounted inside the casing (e.g. normal or
+ * upside-down).
+ */
+ struct drm_property *panel_orientation_property;
+
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 34b6bb34b002..f60fae67bc1f 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -127,6 +127,13 @@ extern "C" {
#define DRM_MODE_LINK_STATUS_GOOD 0
#define DRM_MODE_LINK_STATUS_BAD 1
+/* Panel Orientation options */
+#define DRM_MODE_PANEL_ORIENTATION_UNKNOWN -1
+#define DRM_MODE_PANEL_ORIENTATION_NORMAL 0
+#define DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP 1
+#define DRM_MODE_PANEL_ORIENTATION_LEFT_UP 2
+#define DRM_MODE_PANEL_ORIENTATION_RIGHT_UP 3
+
/*
* DRM_MODE_ROTATE_<degrees>
*
--
2.14.3
More information about the Intel-gfx
mailing list