[Intel-gfx] [PATCH] tests/kms_plane_scaling: Enhanced plane scaler test case.
Maiti, Nabendu Bikash
nabendu.bikash.maiti at intel.com
Wed Nov 8 08:31:43 UTC 2017
Regards,
Nabendu
> -----Original Message-----
> From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
> Yadav Jyoti
> Sent: Tuesday, November 7, 2017 9:19 AM
> To: intel-gfx at lists.freedesktop.org
> Cc: daniel.vetter at ffwll.ch; Srinivas, Vidya <vidya.srinivas at intel.com>
> Subject: [Intel-gfx] [PATCH] tests/kms_plane_scaling: Enhanced plane scaler test
> case.
>
> From: Jyoti Yadav <jyoti.r.yadav at intel.com>
>
> Added few subtests to cover below gaps.
> 1. scaler with pixelformat and tiling.
> 2. scaler with rotation
> 3. scaler with multiple planes
> 4. scaler with multi pipe
> 5. scaler with clipping/clamping scenario
>
> Signed-off-by: Jyoti Yadav <jyoti.r.yadav at intel.com>
> ---
> tests/kms_plane_scaling.c | 480
> +++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 476 insertions(+), 4 deletions(-)
>
> diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c index
> 5ed69f3..c1bb7b1 100644
> --- a/tests/kms_plane_scaling.c
> +++ b/tests/kms_plane_scaling.c
> @@ -43,10 +43,11 @@ typedef struct {
> struct igt_fb fb1;
> struct igt_fb fb2;
> struct igt_fb fb3;
> + struct igt_fb fb4;
> int fb_id1;
> int fb_id2;
> int fb_id3;
> -
> + int fb_id4;
> igt_plane_t *plane1;
> igt_plane_t *plane2;
> igt_plane_t *plane3;
> @@ -54,6 +55,51 @@ typedef struct {
> } data_t;
>
> #define FILE_NAME "1080p-left.png"
> +#define MIN_SRC_WIDTH 8
> +#define MAX_SRC_WIDTH 4096
> +static uint32_t check_pixel_format(uint32_t pixel_format) {
> + const uint32_t *igt_formats;
> + int num_igt_formats;
> + int i;
> +
> +
> + igt_get_all_cairo_formats(&igt_formats, &num_igt_formats);
> + for (i = 0; i < num_igt_formats; i++) {
> + if (pixel_format == igt_formats[i])
> + return 0;
> + }
> +
> + return -1;
> +}
> +bool is_igt_output_connected(igt_output_t *output) {
> + /* Something went wrong during probe? */
> + if (!output->config.connector)
> + return false;
> +
> + if (output->config.connector->connection ==
> DRM_MODE_CONNECTED)
> + return true;
> +
> + return false;
> +}
> +
> +static igt_output_t *get_next_valid_output(igt_display_t *data, int i)
> +{
> + int j = 0, valid_output = 0;
> + drmModeModeInfo *mode;
> + for (j = 0; j < data->n_outputs; j++) {
> + if (is_igt_output_connected(&data->outputs[j])) {
> + mode = igt_output_get_mode(&data->outputs[j]);
> + if (mode->hdisplay != 0 && mode->vdisplay != 0) {
> + valid_output++;
> + if (valid_output == i)
> + return &data->outputs[j];
> + }
> + }
> + }
> + return NULL;
> +}
>
> static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
> igt_plane_t *plane, drmModeModeInfo *mode, enum
> igt_commit_style s) @@ -298,7 +344,418 @@ static void
> test_plane_scaling(data_t *d)
> igt_require_f(valid_tests, "no valid crtc/connector combinations
> found\n"); }
>
> -igt_simple_main
> +uint64_t get_tiling(int i)
> +{
> + switch (i) {
> + case 0:
> + return LOCAL_DRM_FORMAT_MOD_NONE;
> + break;
> + case 1:
> + return LOCAL_I915_FORMAT_MOD_X_TILED;
> + break;
> + case 2:
> + return LOCAL_I915_FORMAT_MOD_Y_TILED;
> + break;
> + case 3:
> + return LOCAL_I915_FORMAT_MOD_Yf_TILED;
> + break;
> + default:
> + return -1;
> + }
> +}
> +
> +void loop_plane_scaling(data_t *d, igt_plane_t *plane, uint32_t pixel_format,
> + uint64_t tiling, enum pipe pipe, igt_output_t *output) {
> + igt_display_t *display = &d->display;
> + int width, height;
> + /* create buffer in the range of min and max source side limit.*/
> + for (width = MIN_SRC_WIDTH; width <= MAX_SRC_WIDTH; width =
> width + 500) {
> + igt_output_set_pipe(output, pipe);
> + height = width + 10;
> + d->fb_id1 = igt_create_pattern_fb(display->drm_fd, width,
> height,
> + pixel_format, tiling, &d->fb1);
> + igt_assert(d->fb_id1);
> + igt_plane_set_fb(plane, &d->fb1);
> + /* check upscaling */
> + igt_fb_set_position(&d->fb1, plane, 0, 0);
> + igt_fb_set_size(&d->fb1, plane, d->fb1.width, d->fb1.height);
> + igt_plane_set_position(plane, 10, 10);
> + igt_plane_set_size(plane, width*2, height*2);
> + igt_display_commit2(display, COMMIT_ATOMIC);
> + igt_plane_set_fb(plane, NULL);
> + igt_plane_set_position(plane, 0, 0);
> + if (d->fb_id1) {
> + igt_remove_fb(d->drm_fd, &d->fb1);
> + d->fb_id1 = 0;
> + }
Instead of removing fb itself in this for loop, just change the fb size, create and remove fb once.
> + }
> +}
> +void test_scaler_with_pixel_format(data_t *d) {
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + igt_plane_t *plane;
> + int valid_tests = 0;
> + igt_require(d->num_scalers);
> + for_each_pipe_with_valid_output(display, pipe, output) {
> + drmModeModeInfo *mode;
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> + for_each_plane_on_pipe(display, pipe, plane) {
> + /* check if plane is cursor. */
> + if (plane->type == DRM_PLANE_TYPE_CURSOR)
> + continue;
> + /* run loop for all pixel formats.*/
> + drmModePlanePtr plane_kms;
> + plane_kms = plane->drm_plane;
> + for (int j = 0; j < plane_kms->count_formats; j++) {
> + /* check plane pixel format is supported in
> + * cairo pixel formats.
> + */
> + if (check_pixel_format(plane_kms->formats[j])
> == 0) {
> + /* loop for tiling */
> + igt_require_fb_modifiers(d->drm_fd);
> + for (int i = 0; i < 4; i++) {
> + uint64_t tiling = get_tiling(i);
> + loop_plane_scaling(d, plane,
> plane_kms->formats[j],
> + tiling, pipe,
> output);
> + }
> + }
> + }
> + }
> + }
> +}
> +
> +static igt_rotation_t get_rotation_angle(int i) {
> + switch (i) {
> + case 0:
> + return IGT_ROTATION_0;
> + break;
> + case 1:
> + return IGT_ROTATION_90;
> + break;
> + case 2:
> + return IGT_ROTATION_180;
> + break;
> + case 3:
> + return IGT_ROTATION_270;
> + break;
> + default:
> + return -1;
> + }
> +}
> +
> +void test_scaler_with_rotation(data_t *d) {
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + igt_plane_t *plane;
> + int valid_tests = 0;
> + igt_require(d->num_scalers);
> + for_each_pipe_with_valid_output(display, pipe, output) {
> + drmModeModeInfo *mode;
> + mode = igt_output_get_mode(output);
> + for_each_plane_on_pipe(display, pipe, plane) {
> + if (plane->type == DRM_PLANE_TYPE_CURSOR)
> + continue;
> + /* run loop for all pixel formats.*/
> + drmModePlanePtr plane_kms;
> + plane_kms = plane->drm_plane;
> + for (int j = 0; j < plane_kms->count_formats; j++) {
> + /*
For multiline comments use
/*
* comments
*/
90/270 degree rotation is not supported on
> RGB565 and C8 pixel
> + * formats
> + */
> + if (plane_kms->formats[j] ==
> DRM_FORMAT_RGB565 ||
> + plane_kms->formats[j] ==
> DRM_FORMAT_C8) {
> + continue;
> + }
> + if (check_pixel_format(plane_kms->formats[j])
> == 0) {
> + igt_output_set_pipe(output, pipe);
> + d->fb_id1 =
> igt_create_pattern_fb(display->drm_fd,
> +
> mode->hdisplay, mode->vdisplay,
> +
> plane_kms->formats[j],
> +
> LOCAL_I915_FORMAT_MOD_Y_TILED, &d->fb1);
> + igt_assert(d->fb_id1);
> + /* check all the supported rotation
> format*/
> + for (int i = 0; i < 4; i++) {
> + igt_plane_set_fb(plane, &d-
> >fb1);
> + /* check upscaling */
> + igt_fb_set_position(&d->fb1,
> plane, 0, 0);
> + igt_fb_set_size(&d->fb1,
> plane, 300, 400);
> + igt_plane_set_position(plane,
> 0, 0);
> + igt_plane_set_size(plane,
> mode->hdisplay-200, mode->vdisplay-200);
> + igt_plane_set_rotation(plane,
> get_rotation_angle(i));
> + igt_display_commit2(display,
> COMMIT_ATOMIC);
> + /* check downscaling */
> + igt_fb_set_position(&d->fb1,
> plane, 0, 0);
> + igt_fb_set_size(&d->fb1,
> plane, 300, 400);
> + igt_plane_set_position(plane,
> 0, 0);
> + igt_plane_set_size(plane, 350,
> 250); /* downscale by 50 pixels*/
Above statement is not true for all rotation cases ( I = 0 to 3)
> + igt_plane_set_rotation(plane,
> get_rotation_angle(i));
> + igt_display_commit2(display,
> COMMIT_ATOMIC);
> + /* disable Plane*/
> + igt_plane_set_fb(plane, NULL);
> + igt_plane_set_position(plane,
> 0, 0);
Rotate without disabling the plane.
> + }
Are we missing test cases for linear + X_tiling - 180 rotation with different format?
> + if (d->fb_id1) {
> + igt_remove_fb(d->drm_fd, &d-
> >fb1);
> + d->fb_id1 = 0;
> + }
> + }
> + }
> + }
> + }
> +}
> +
> +void test_scaler_with_multiple_planes(data_t *d) {
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + int valid_tests = 0;
> + igt_require(d->num_scalers);
> + for_each_pipe_with_valid_output(display, pipe, output) {
> + /* For Gen 9, Pipe C supports only 1 scaler*/
> + if (intel_gen(d->devid) == 9 && pipe == PIPE_C)
> + continue;
> + drmModeModeInfo *mode;
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> + /* Create 2 Framebuffers */
> + d->fb_id2 = igt_create_pattern_fb(d->drm_fd, mode->hdisplay,
> mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> +
> LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
> + &d->fb2);
> + igt_assert(d->fb_id2);
> +
> + d->fb_id3 = igt_create_pattern_fb(d->drm_fd,
> + mode->hdisplay, mode-
> >vdisplay,
> + DRM_FORMAT_XRGB8888,
> +
> LOCAL_I915_FORMAT_MOD_Y_TILED, /* tiled */
> + &d->fb3);
> + igt_assert(d->fb_id3);
> +
> + d->plane1 = igt_output_get_plane(output, 0);
> + igt_plane_set_fb(d->plane1, &d->fb2);
> + d->plane2 = igt_output_get_plane(output, 1);
> + igt_plane_set_fb(d->plane2, &d->fb3);
> + /* plane upscaling on 2 planes*/
> + igt_fb_set_position(&d->fb2, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb2, d->plane1, 300, 300);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_size(d->plane1, 400, 400);
> +
> + igt_fb_set_position(&d->fb3, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb3, d->plane2, 400, 400);
> + igt_plane_set_position(d->plane2, 100, 100);
> + igt_plane_set_size(d->plane2, 500, 500);
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
> + /* disbale above 2planes*/
> + igt_plane_set_fb(d->plane1, NULL);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_fb(d->plane2, NULL);
> + igt_plane_set_position(d->plane2, 0, 0);
> +
Instead of disabling planes disable scaler and switch. Also show overlapping case.
e.g 1 and 2 is using, 2 is disabled and 3 is using scaler.
Should fail and capture if no of requested scaler is more than available scaler on platform to platform.
> + /* Switch scaler from above 2 planes to next 2 planes*/
> + d->plane3 = igt_output_get_plane(output, 2);
> + igt_plane_set_fb(d->plane3, &d->fb2);
> + d->plane4 = igt_output_get_plane(output, 3);
> + igt_plane_set_fb(d->plane4, &d->fb3);
> +
> + igt_fb_set_position(&d->fb2, d->plane3, 0, 0);
> + igt_fb_set_size(&d->fb2, d->plane3, 300, 300);
> + igt_plane_set_position(d->plane3, 0, 0);
> + igt_plane_set_size(d->plane3, 600, 600);
> +
> + igt_fb_set_position(&d->fb3, d->plane4, 0, 0);
> + igt_fb_set_size(&d->fb3, d->plane4, 400, 400);
> + igt_plane_set_position(d->plane4, 100, 100);
> + igt_plane_set_size(d->plane4, 700, 700);
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
> + /* disbale above 2planes and remove FB*/
> + igt_plane_set_fb(d->plane3, NULL);
> + igt_plane_set_position(d->plane3, 0, 0);
> + igt_plane_set_fb(d->plane4, NULL);
> + igt_plane_set_position(d->plane4, 0, 0);
> + if (d->fb_id2) {
> + igt_remove_fb(d->drm_fd, &d->fb2);
> + d->fb_id2 = 0;
> + }
> + if (d->fb_id3) {
> + igt_remove_fb(d->drm_fd, &d->fb3);
> + d->fb_id3 = 0;
> + }
> + }
> +}
> +
> +void test_scaler_with_clipping_clamping_scenario(data_t *d) {
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + int valid_tests = 0;
> + igt_require(d->num_scalers);
> +
> + for_each_pipe_with_valid_output(display, pipe, output) {
> +
> + if (intel_gen(d->devid) == 9 && pipe == PIPE_C)
> + continue;
> + drmModeModeInfo *mode;
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> + /* allocate fb2 and fb3 */
> + d->fb_id2 = igt_create_pattern_fb(d->drm_fd, mode->hdisplay,
> mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> +
> LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
> + &d->fb2);
> + igt_assert(d->fb_id2);
> +
> + d->fb_id3 = igt_create_pattern_fb(d->drm_fd,
> + mode->hdisplay, mode-
> >vdisplay,
> + DRM_FORMAT_XRGB8888,
> +
> LOCAL_I915_FORMAT_MOD_Y_TILED, /* tiled */
> + &d->fb3);
> + igt_assert(d->fb_id3);
> +
> + /* Set up display with plane 1 */
> + d->plane1 = igt_output_get_plane(output, 0);
> + igt_plane_set_fb(d->plane1, &d->fb2);
> + d->plane2 = igt_output_get_plane(output, 1);
> + igt_plane_set_fb(d->plane2, &d->fb3);
> +
> + /* plane upscaling on 2 planes*/
> + igt_fb_set_position(&d->fb2, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb2, d->plane1, 300, 300);
> + igt_plane_set_position(d->plane1, 100, 400);
> + /* scaled window size is outside the modeset area.*/
> + igt_plane_set_size(d->plane1, mode->hdisplay + 200, mode-
> >vdisplay +
> +200);
> +
> + igt_fb_set_position(&d->fb3, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb3, d->plane2, 400, 400);
> + igt_plane_set_position(d->plane2, 100, 100);
> + /* scaled window size is outside the modeset area.*/
> + igt_plane_set_size(d->plane2, mode->hdisplay + 100, mode-
> >vdisplay + 100);
> + igt_display_commit2(display, COMMIT_ATOMIC);
Add test case for fb size is bigger than modeset , destination size may be bigger than fb size/ modesetsize.
> + /* disbale above 2planes*/
> + igt_plane_set_fb(d->plane1, NULL);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_fb(d->plane2, NULL);
> + igt_plane_set_position(d->plane2, 0, 0);
> + if (d->fb_id2) {
> + igt_remove_fb(d->drm_fd, &d->fb2);
> + d->fb_id2 = 0;
> + }
> + if (d->fb_id3) {
> + igt_remove_fb(d->drm_fd, &d->fb3);
> + d->fb_id3 = 0;
> + }
> + }
> +}
> +
> +void test_scaler_with_multi_pipe_plane(data_t *d) {
> + igt_display_t *display = &d->display;
> + igt_output_t *output1, *output2;
> + /*check whether 2 connectors are active .*/
> + igt_skip_on(display->n_outputs < 2);
> + output1 = get_next_valid_output(display, 1);
> + output2 = get_next_valid_output(display, 2);
> + igt_output_set_pipe(output1, 0);
> + igt_output_set_pipe(output2, 1);
> + d->plane1 = igt_output_get_plane_type(output1,
> DRM_PLANE_TYPE_PRIMARY);
> + d->plane2 = igt_output_get_plane_type(output1,
> DRM_PLANE_TYPE_OVERLAY);
> + d->plane3 = igt_output_get_plane_type(output2,
> DRM_PLANE_TYPE_PRIMARY);
> + d->plane4 = igt_output_get_plane_type(output2,
> DRM_PLANE_TYPE_OVERLAY);
> + drmModeModeInfo *mode1, *mode2;
> + mode1 = igt_output_get_mode(output1);
> + mode2 = igt_output_get_mode(output2);
> + /* allocate fb with mode size */
> + d->fb_id1 = igt_create_pattern_fb(d->drm_fd, mode1->hdisplay,
> mode1->vdisplay,
> + DRM_FORMAT_XRGB8888,
> LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
> + &d->fb1);
> + igt_assert(d->fb_id1);
> +
> + d->fb_id2 = igt_create_pattern_fb(d->drm_fd,
> + mode1->hdisplay, mode1->vdisplay,
> + DRM_FORMAT_XRGB8888,
> +
> LOCAL_I915_FORMAT_MOD_Y_TILED, /* tiled */
> + &d->fb2);
> + igt_assert(d->fb_id2);
> + d->fb_id3 = igt_create_pattern_fb(d->drm_fd, mode2->hdisplay,
> mode2->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_I915_FORMAT_MOD_Y_TILED,
> /* tiled */
> + &d->fb3);
> + igt_assert(d->fb_id3);
> +
> + d->fb_id4 = igt_create_pattern_fb(d->drm_fd,
> + mode2->hdisplay, mode2->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> /* tiled */
> + &d->fb4);
> + igt_assert(d->fb_id4);
> + /* Set up display with plane 1 */
> + igt_plane_set_fb(d->plane1, &d->fb1);
> + igt_plane_set_fb(d->plane2, &d->fb2);
> + igt_plane_set_fb(d->plane3, &d->fb3);
> + igt_plane_set_fb(d->plane4, &d->fb4);
> +
> + /* plane upscaling on 2 planes*/
> + igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb1, d->plane1, 300, 300);
> + igt_plane_set_position(d->plane1, 100, 100);
> + igt_plane_set_size(d->plane1, mode1->hdisplay - 100, mode1->vdisplay
> -
> +50);
> +
> + igt_fb_set_position(&d->fb2, d->plane2, 100, 100);
> + igt_fb_set_size(&d->fb2, d->plane2, d->fb2.width - 100, d->fb2.height -
> 100);
> + igt_plane_set_position(d->plane2, 100, 100);
> + /* downscale by 50 pixels*/
> + igt_plane_set_size(d->plane2, d->fb2.width - 150, d->fb2.height -
> +150);
> +
> + igt_fb_set_position(&d->fb3, d->plane3, 0, 0);
> + igt_fb_set_size(&d->fb3, d->plane3, 400, 400);
> + igt_plane_set_position(d->plane3, 100, 100);
> + igt_plane_set_size(d->plane3, mode2->hdisplay - 50, mode2->vdisplay -
> +50);
> +
> + igt_fb_set_position(&d->fb4, d->plane4, 100, 100);
> + igt_fb_set_size(&d->fb2, d->plane4, d->fb4.width - 100, d->fb4.height -
> 100);
> + igt_plane_set_position(d->plane4, 100, 100);
> + /* downscale by 50 pixels*/
> + igt_plane_set_size(d->plane4, d->fb4.width - 150, d->fb4.height -
> +150);
> +
> + igt_display_commit2(display, COMMIT_ATOMIC);
If possible change the fbs (new fb and sizes ) and flip few more time
> + /* disbale above 4 planes*/
> + igt_plane_set_fb(d->plane1, NULL);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_fb(d->plane2, NULL);
> + igt_plane_set_position(d->plane2, 0, 0);
> + igt_plane_set_fb(d->plane3, NULL);
> + igt_plane_set_position(d->plane3, 0, 0);
> + igt_plane_set_fb(d->plane4, NULL);
> + igt_plane_set_position(d->plane4, 0, 0);
> + if (d->fb_id1) {
> + igt_remove_fb(d->drm_fd, &d->fb1);
> + d->fb_id1 = 0;
> + }
> + if (d->fb_id2) {
> + igt_remove_fb(d->drm_fd, &d->fb2);
> + d->fb_id2 = 0;
> + }
> + if (d->fb_id3) {
> + igt_remove_fb(d->drm_fd, &d->fb3);
> + d->fb_id3 = 0;
> + }
> + if (d->fb_id4) {
> + igt_remove_fb(d->drm_fd, &d->fb4);
> + d->fb_id4 = 0;
> + }
> +}
> +igt_main
> {
> data_t data = {};
>
> @@ -308,11 +765,26 @@ igt_simple_main
> data.drm_fd = drm_open_driver(DRIVER_INTEL);
> igt_require_pipe_crc(data.drm_fd);
> igt_display_init(&data.display, data.drm_fd);
> + igt_require(data.display.is_atomic);
> data.devid = intel_get_drm_devid(data.drm_fd);
>
> data.num_scalers = intel_gen(data.devid) >= 9 ? 2 : 0;
>
> - test_plane_scaling(&data);
> -
> + //test_plane_scaling(&data);
> + igt_subtest_f("scaler_with_pixel_format") {
> + test_scaler_with_pixel_format(&data);
> + }
> + igt_subtest_f("scaler_with_rotation") {
> + test_scaler_with_rotation(&data);
> + }
> + igt_subtest_f("scaler_with_multiple_planes") {
> + test_scaler_with_multiple_planes(&data);
> + }
> + igt_subtest_f("scaler_with_clipping_clamping") {
> + test_scaler_with_clipping_clamping_scenario(&data);
> + }
> + igt_subtest_f("scaler_with_multi_pipe_plane") {
> + test_scaler_with_multi_pipe_plane(&data);
> + }
> igt_display_fini(&data.display);
> }
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list