[Intel-gfx] [PATCH] drm/i915: sync dp link status checks against atomic commmits
Daniel Vetter
daniel at ffwll.ch
Wed Nov 8 13:11:46 UTC 2017
On Wed, Nov 08, 2017 at 03:04:58PM +0200, Ville Syrjälä wrote:
> On Wed, Nov 08, 2017 at 01:57:50PM +0100, Daniel Vetter wrote:
> > Two bits:
> > - check actual atomic state, the legacy stuff can only be looked at
> > from within the atomic_commit_tail function, since it's only
> > protected by ordering and not by any locks.
> >
> > - Make sure we don't wreak the work an ongoing nonblocking commit is
> > doing.
>
> I still think we need to move the retraining to the hotplug work.
Why? One of the patch series Maarten mentioned says there's a deadlock
with dp aux, but it seems to be all just fine when CI retrains.
And even if there is a deadlock, it's there already, so not sure why we
need to block this bugfix on a different bugfix. Which seems to be what
you're suggesting here (but it's a bit sparse).
-Daniel
> > v2: We need the crtc lock too, because a plane update might change it
> > without having to acquire the connection_mutex (Maarten). Use
> > Maarten's changes for this locking, while keeping the logic that uses
> > the connection->commit->hw_done signal for syncing with nonblocking
> > commits.
> >
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > References: https://bugs.freedesktop.org/show_bug.cgi?id=103336
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99272
> > Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 56 ++++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 50 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index d27c0145ac91..7cd7ab4fb431 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -4319,6 +4319,8 @@ static void
> > intel_dp_check_link_status(struct intel_dp *intel_dp)
> > {
> > struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> > + struct drm_connector_state *conn_state =
> > + intel_dp->attached_connector->base.state;
> > struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > u8 link_status[DP_LINK_STATUS_SIZE];
> >
> > @@ -4329,10 +4331,15 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
> > return;
> > }
> >
> > - if (!intel_encoder->base.crtc)
> > + if (!conn_state->crtc)
> > return;
> >
> > - if (!to_intel_crtc(intel_encoder->base.crtc)->active)
> > + WARN_ON(!drm_modeset_is_locked(&conn_state->crtc->mutex));
> > +
> > + if (!conn_state->crtc->state->active)
> > + return;
> > +
> > + if (!try_wait_for_completion(&conn_state->commit->hw_done))
> > return;
> >
> > /*
> > @@ -4368,7 +4375,6 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
> > static bool
> > intel_dp_short_pulse(struct intel_dp *intel_dp)
> > {
> > - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> > u8 sink_irq_vector = 0;
> > u8 old_sink_count = intel_dp->sink_count;
> > @@ -4408,9 +4414,8 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
> > DRM_DEBUG_DRIVER("CP or sink specific irq unhandled\n");
> > }
> >
> > - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> > intel_dp_check_link_status(intel_dp);
> > - drm_modeset_unlock(&dev->mode_config.connection_mutex);
> > +
> > if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
> > DRM_DEBUG_KMS("Link Training Compliance Test requested\n");
> > /* Send a Hotplug Uevent to userspace to start modeset */
> > @@ -4860,8 +4865,19 @@ intel_dp_detect(struct drm_connector *connector,
> > connector->base.id, connector->name);
> >
> > /* If full detect is not performed yet, do a full detect */
> > - if (!intel_dp->detect_done)
> > + if (!intel_dp->detect_done) {
> > + struct drm_crtc *crtc;
> > + int ret;
> > +
> > + crtc = connector->state->crtc;
> > + if (crtc) {
> > + ret = drm_modeset_lock(&crtc->mutex, ctx);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > status = intel_dp_long_pulse(intel_dp->attached_connector);
> > + }
> >
> > intel_dp->detect_done = false;
> >
> > @@ -5146,10 +5162,38 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> > }
> >
> > if (!intel_dp->is_mst) {
> > + struct drm_modeset_acquire_ctx ctx;
> > + struct drm_connector *connector = &intel_dp->attached_connector->base;
> > + struct drm_crtc *crtc;
> > + int iret;
> > +
> > + drm_modeset_acquire_init(&ctx, 0);
> > +retry:
> > + iret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
> > + if (iret)
> > + goto err;
> > +
> > + crtc = connector->state->crtc;
> > + if (crtc) {
> > + iret = drm_modeset_lock(&crtc->mutex, &ctx);
> > + if (iret)
> > + goto err;
> > + }
> > +
> > if (!intel_dp_short_pulse(intel_dp)) {
> > intel_dp->detect_done = false;
> > goto put_power;
> > }
> > +
> > +err:
> > + if (iret == -EDEADLK) {
> > + drm_modeset_backoff(&ctx);
> > + goto retry;
> > + }
> > +
> > + drm_modeset_drop_locks(&ctx);
> > + drm_modeset_acquire_fini(&ctx);
> > + WARN(iret, "Acquiring modeset locks failed with %i\n", iret);
> > }
> >
> > ret = IRQ_HANDLED;
> > --
> > 2.15.0
>
> --
> Ville Syrjälä
> Intel OTC
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list