[Intel-gfx] [PATCH v3] drm/i915: Apply Wa Display #1183 on skl, kbl, and cfl
Lucas De Marchi
lucas.demarchi at intel.com
Thu Nov 9 10:58:04 UTC 2017
Wa Display #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
enabling or in previous enabling."
This Workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly. Although
they were expecting the DPLL0 link rate to be unchanged on
runtime.
We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency. The workaround
for those cases are similar but different enough to have them
done in different places.
This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.
Cc: Arthur J Runyan <arthur.j.runyan at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
---
I tried to test this but both on SKL and KBL that I have the bug that requires
the WA isn't triggered.
drivers/gpu/drm/i915/i915_reg.h | 2 ++
drivers/gpu/drm/i915/intel_cdclk.c | 51 ++++++++++++++++++++++++++-------
drivers/gpu/drm/i915/intel_runtime_pm.c | 10 +++++++
3 files changed, 53 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6ef33422f762..a32d8200bb47 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6981,6 +6981,7 @@ enum {
#define RESET_PCH_HANDSHAKE_ENABLE (1<<4)
#define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430)
+#define SKL_SELECT_ALTERNATE_DC_EXIT (1<<30)
#define MASK_WAKEMEM (1<<13)
#define SKL_DFSM _MMIO(0x51000)
@@ -8535,6 +8536,7 @@ enum skl_power_gate {
#define BXT_CDCLK_CD2X_DIV_SEL_2 (2<<22)
#define BXT_CDCLK_CD2X_DIV_SEL_4 (3<<22)
#define BXT_CDCLK_CD2X_PIPE(pipe) ((pipe)<<20)
+#define CDCLK_DIVMUX_CD_OVERRIDE (1<<19)
#define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3)
#define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1<<16)
#define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index e8884c2ade98..5e6fc2602711 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -929,17 +929,18 @@ static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
intel_update_max_cdclk(dev_priv);
}
-static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
+static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco,
+ u32 freq_select, u32 cdclk)
{
- int min_cdclk = skl_calc_cdclk(0, vco);
- u32 val;
+ u32 val, cdctl;
WARN_ON(vco != 8100000 && vco != 8640000);
- /* select the minimum CDCLK before enabling DPLL 0 */
- val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk);
- I915_WRITE(CDCLK_CTL, val);
- POSTING_READ(CDCLK_CTL);
+ /* Wa Display #1183: skl,kbl,cfl */
+ cdctl = I915_READ(CDCLK_CTL);
+ cdctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
+ cdctl |= freq_select | skl_cdclk_decimal(cdclk);
+ I915_WRITE(CDCLK_CTL, cdctl);
/*
* We always enable DPLL0 with the lowest link rate possible, but still
@@ -965,6 +966,10 @@ static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
I915_WRITE(DPLL_CTRL1, val);
POSTING_READ(DPLL_CTRL1);
+ /* Wa Display #1183: skl,kbl,cfl */
+ cdctl |= CDCLK_DIVMUX_CD_OVERRIDE;
+ I915_WRITE(CDCLK_CTL, cdctl);
+
I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
if (intel_wait_for_register(dev_priv,
@@ -972,6 +977,17 @@ static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
5))
DRM_ERROR("DPLL0 not locked\n");
+ /* Wa Display #1183: skl,kbl,cfl */
+ cdctl &= ~CDCLK_FREQ_SEL_MASK;
+ I915_WRITE(CDCLK_CTL, cdctl);
+
+ cdctl |= freq_select;
+ I915_WRITE(CDCLK_CTL, cdctl);
+
+ cdctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
+ I915_WRITE(CDCLK_CTL, cdctl);
+ POSTING_READ(CDCLK_CTL);
+
dev_priv->cdclk.hw.vco = vco;
/* We'll want to keep using the current vco from now on. */
@@ -1037,10 +1053,25 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
skl_dpll0_disable(dev_priv);
if (dev_priv->cdclk.hw.vco != vco)
- skl_dpll0_enable(dev_priv, vco);
+ skl_dpll0_enable(dev_priv, vco, freq_select, cdclk);
+ else {
+ u32 cdctl = I915_READ(CDCLK_CTL);
- I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk));
- POSTING_READ(CDCLK_CTL);
+ /* Wa Display #1183: skl,kbl,cfl */
+ cdctl |= CDCLK_DIVMUX_CD_OVERRIDE;
+ I915_WRITE(CDCLK_CTL, cdctl);
+
+ cdctl &= ~CDCLK_FREQ_SEL_MASK;
+ I915_WRITE(CDCLK_CTL, cdctl);
+
+ cdctl &= ~CDCLK_FREQ_DECIMAL_MASK;
+ cdctl |= freq_select | skl_cdclk_decimal(cdclk);
+ I915_WRITE(CDCLK_CTL, cdctl);
+
+ cdctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
+ I915_WRITE(CDCLK_CTL, cdctl);
+ POSTING_READ(CDCLK_CTL);
+ }
/* inform PCU of the change */
mutex_lock(&dev_priv->pcu_lock);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 8315499452dc..35796fa8e6b4 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -598,6 +598,11 @@ void gen9_enable_dc5(struct drm_i915_private *dev_priv)
DRM_DEBUG_KMS("Enabling DC5\n");
+ /* Wa Display #1183: skl,kbl,cfl */
+ if (IS_GEN9_BC(dev_priv))
+ I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+ SKL_SELECT_ALTERNATE_DC_EXIT);
+
gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
}
@@ -625,6 +630,11 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
{
DRM_DEBUG_KMS("Disabling DC6\n");
+ /* Wa Display #1183: skl,kbl,cfl */
+ if (IS_GEN9_BC(dev_priv))
+ I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+ SKL_SELECT_ALTERNATE_DC_EXIT);
+
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
}
--
2.14.3
More information about the Intel-gfx
mailing list