[Intel-gfx] [PATCH v3] drm/i915: Apply Wa Display #1183 on skl, kbl, and cfl
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Nov 9 13:11:31 UTC 2017
On Thu, Nov 09, 2017 at 02:58:04AM -0800, Lucas De Marchi wrote:
> Wa Display #1183 was recently added to workaround
> "Failures when enabling DPLL0 with eDP link rate 2.16
> or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
> (CDCLK_CTL CD Frequency Select 10b or 11b) used in this
> enabling or in previous enabling."
>
> This Workaround was designed to minimize the impact only
> to save the bad case with that link rates. But HW engineers
> indicated that it should be safe to apply broadly. Although
> they were expecting the DPLL0 link rate to be unchanged on
> runtime.
>
> We need to cover 2 cases: when we are in fact enabling DPLL0
> and when we are just changing the frequency. The workaround
> for those cases are similar but different enough to have them
> done in different places.
>
> This is based on previous patch by Rodrigo Vivi with suggestions
> from Ville Syrjälä.
Still doesn't look like what I suggested.
>
> Cc: Arthur J Runyan <arthur.j.runyan at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> ---
>
> I tried to test this but both on SKL and KBL that I have the bug that requires
> the WA isn't triggered.
>
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_cdclk.c | 51 ++++++++++++++++++++++++++-------
> drivers/gpu/drm/i915/intel_runtime_pm.c | 10 +++++++
> 3 files changed, 53 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 6ef33422f762..a32d8200bb47 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6981,6 +6981,7 @@ enum {
> #define RESET_PCH_HANDSHAKE_ENABLE (1<<4)
>
> #define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430)
> +#define SKL_SELECT_ALTERNATE_DC_EXIT (1<<30)
> #define MASK_WAKEMEM (1<<13)
>
> #define SKL_DFSM _MMIO(0x51000)
> @@ -8535,6 +8536,7 @@ enum skl_power_gate {
> #define BXT_CDCLK_CD2X_DIV_SEL_2 (2<<22)
> #define BXT_CDCLK_CD2X_DIV_SEL_4 (3<<22)
> #define BXT_CDCLK_CD2X_PIPE(pipe) ((pipe)<<20)
> +#define CDCLK_DIVMUX_CD_OVERRIDE (1<<19)
> #define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3)
> #define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1<<16)
> #define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
> diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> index e8884c2ade98..5e6fc2602711 100644
> --- a/drivers/gpu/drm/i915/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> @@ -929,17 +929,18 @@ static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
> intel_update_max_cdclk(dev_priv);
> }
>
> -static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
> +static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco,
> + u32 freq_select, u32 cdclk)
> {
> - int min_cdclk = skl_calc_cdclk(0, vco);
> - u32 val;
> + u32 val, cdctl;
>
> WARN_ON(vco != 8100000 && vco != 8640000);
>
> - /* select the minimum CDCLK before enabling DPLL 0 */
> - val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk);
> - I915_WRITE(CDCLK_CTL, val);
> - POSTING_READ(CDCLK_CTL);
> + /* Wa Display #1183: skl,kbl,cfl */
> + cdctl = I915_READ(CDCLK_CTL);
> + cdctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
> + cdctl |= freq_select | skl_cdclk_decimal(cdclk);
> + I915_WRITE(CDCLK_CTL, cdctl);
>
> /*
> * We always enable DPLL0 with the lowest link rate possible, but still
> @@ -965,6 +966,10 @@ static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
> I915_WRITE(DPLL_CTRL1, val);
> POSTING_READ(DPLL_CTRL1);
>
> + /* Wa Display #1183: skl,kbl,cfl */
> + cdctl |= CDCLK_DIVMUX_CD_OVERRIDE;
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
>
> if (intel_wait_for_register(dev_priv,
> @@ -972,6 +977,17 @@ static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
> 5))
> DRM_ERROR("DPLL0 not locked\n");
>
> + /* Wa Display #1183: skl,kbl,cfl */
> + cdctl &= ~CDCLK_FREQ_SEL_MASK;
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> + cdctl |= freq_select;
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> + cdctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
> + I915_WRITE(CDCLK_CTL, cdctl);
> + POSTING_READ(CDCLK_CTL);
> +
> dev_priv->cdclk.hw.vco = vco;
>
> /* We'll want to keep using the current vco from now on. */
> @@ -1037,10 +1053,25 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
> skl_dpll0_disable(dev_priv);
>
> if (dev_priv->cdclk.hw.vco != vco)
> - skl_dpll0_enable(dev_priv, vco);
> + skl_dpll0_enable(dev_priv, vco, freq_select, cdclk);
> + else {
> + u32 cdctl = I915_READ(CDCLK_CTL);
>
> - I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk));
> - POSTING_READ(CDCLK_CTL);
> + /* Wa Display #1183: skl,kbl,cfl */
> + cdctl |= CDCLK_DIVMUX_CD_OVERRIDE;
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> + cdctl &= ~CDCLK_FREQ_SEL_MASK;
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> + cdctl &= ~CDCLK_FREQ_DECIMAL_MASK;
> + cdctl |= freq_select | skl_cdclk_decimal(cdclk);
> + I915_WRITE(CDCLK_CTL, cdctl);
> +
> + cdctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
> + I915_WRITE(CDCLK_CTL, cdctl);
> + POSTING_READ(CDCLK_CTL);
> + }
>
> /* inform PCU of the change */
> mutex_lock(&dev_priv->pcu_lock);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 8315499452dc..35796fa8e6b4 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -598,6 +598,11 @@ void gen9_enable_dc5(struct drm_i915_private *dev_priv)
>
> DRM_DEBUG_KMS("Enabling DC5\n");
>
> + /* Wa Display #1183: skl,kbl,cfl */
> + if (IS_GEN9_BC(dev_priv))
> + I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
> + SKL_SELECT_ALTERNATE_DC_EXIT);
> +
> gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
> }
>
> @@ -625,6 +630,11 @@ void skl_disable_dc6(struct drm_i915_private *dev_priv)
> {
> DRM_DEBUG_KMS("Disabling DC6\n");
>
> + /* Wa Display #1183: skl,kbl,cfl */
> + if (IS_GEN9_BC(dev_priv))
> + I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
> + SKL_SELECT_ALTERNATE_DC_EXIT);
> +
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> }
>
> --
> 2.14.3
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list