[Intel-gfx] [PATCH 1/1] drm/i915/cnl: Extend HDMI 2.0 support to CNL.

Rodrigo Vivi rodrigo.vivi at intel.com
Mon Nov 13 18:47:44 UTC 2017


On Sat, Nov 11, 2017 at 09:43:44AM +0000, Sharma, Shashank wrote:
> Regards
> 
> Shashank
> 
> 
> On 11/11/2017 3:56 AM, Rodrigo Vivi wrote:
> > Starting on GLK we support HDMI 2.0. So this patch only
> > extend the work Shashank has made to GLK to CNL.
> > 
> > Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> > Cc: Shashank Sharma <shashank.sharma at intel.com>
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > ---
> >   drivers/gpu/drm/i915/intel_hdmi.c | 7 ++++---
> >   1 file changed, 4 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> > index 2d95db64cdf2..1b22b587e98c 100644
> > --- a/drivers/gpu/drm/i915/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> > @@ -1235,7 +1235,7 @@ static int intel_hdmi_source_max_tmds_clock(struct intel_encoder *encoder)
> >   		&dev_priv->vbt.ddi_port_info[encoder->port];
> >   	int max_tmds_clock;
> > -	if (IS_GEMINILAKE(dev_priv))
> > +	if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
> Would it be a good idea to create a new macro called IS_HDMI2_SUPPORTED() or
> a function is_hdmi2_supported() where we keep all the GEN check ?

I asked myself the same question.
I believe a IS_HDMI2_SUPPORTED or HAS_HDMI2_SUPPORT is a good idea...

> >   		max_tmds_clock = 594000;
> >   	else if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
> >   		max_tmds_clock = 300000;
> > @@ -1511,7 +1511,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
> >   	pipe_config->lane_count = 4;
> > -	if (scdc->scrambling.supported && IS_GEMINILAKE(dev_priv)) {
> > +	if (scdc->scrambling.supported && (IS_GEMINILAKE(dev_priv) ||
> > +					   INTEL_GEN(dev_priv) >= 10) {
> >   		if (scdc->scrambling.low_rates)
> >   			pipe_config->hdmi_scrambling = true;
> > @@ -2033,7 +2034,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
> >   	connector->doublescan_allowed = 0;
> >   	connector->stereo_allowed = 1;
> > -	if (IS_GEMINILAKE(dev_priv))
> > +	if (IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10)
> >   		connector->ycbcr_420_allowed = true;
> Looks good otherwise.
> - Shashank
> >   	intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port);
> 


More information about the Intel-gfx mailing list