[Intel-gfx] [PATCH 1/3] drm/i915: Make ips_enabled a property depending on whether IPS is enabled.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon Nov 20 10:48:22 UTC 2017
Op 17-11-17 om 16:52 schreef Ville Syrjälä:
> On Fri, Nov 17, 2017 at 04:37:54PM +0100, Maarten Lankhorst wrote:
>> ips_enabled was used as a variable of whether IPS can be enabled or not,
>> but should be used to test whether IPS is actually enabled.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_display.c | 75 ++++++++++++++++-------------------
>> drivers/gpu/drm/i915/intel_pipe_crc.c | 2 -
>> 2 files changed, 35 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 3b3dec1e6640..8283e80597bd 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4870,7 +4870,7 @@ void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
>> struct drm_device *dev = crtc->base.dev;
>> struct drm_i915_private *dev_priv = to_i915(dev);
>>
>> - if (!crtc->config->ips_enabled)
>> + if (!crtc_state->ips_enabled)
>> return;
>>
>> /*
>> @@ -4966,14 +4966,6 @@ intel_post_enable_primary(struct drm_crtc *crtc,
>> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> int pipe = intel_crtc->pipe;
>>
>> - /*
>> - * FIXME IPS should be fine as long as one plane is
>> - * enabled, but in practice it seems to have problems
>> - * when going from primary only to sprite only and vice
>> - * versa.
>> - */
>> - hsw_enable_ips(new_crtc_state);
>> -
>> /*
>> * Gen2 reports pipe underruns whenever all planes are disabled.
>> * So don't enable underrun reporting before at least some planes
>> @@ -4989,10 +4981,9 @@ intel_post_enable_primary(struct drm_crtc *crtc,
>> intel_check_pch_fifo_underruns(dev_priv);
>> }
>>
>> -/* FIXME move all this to pre_plane_update() with proper state tracking */
>> +/* FIXME get rid of this and use pre_plane_update */
>> static void
>> -intel_pre_disable_primary(struct drm_crtc *crtc,
>> - const struct intel_crtc_state *old_crtc_state)
>> +intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
>> {
>> struct drm_device *dev = crtc->dev;
>> struct drm_i915_private *dev_priv = to_i915(dev);
>> @@ -5001,32 +4992,12 @@ intel_pre_disable_primary(struct drm_crtc *crtc,
>>
>> /*
>> * Gen2 reports pipe underruns whenever all planes are disabled.
>> - * So diasble underrun reporting before all the planes get disabled.
>> - * FIXME: Need to fix the logic to work when we turn off all planes
>> - * but leave the pipe running.
>> + * So disable underrun reporting before all the planes get disabled.
>> */
>> if (IS_GEN2(dev_priv))
>> intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
>>
>> - /*
>> - * FIXME IPS should be fine as long as one plane is
>> - * enabled, but in practice it seems to have problems
>> - * when going from primary only to sprite only and vice
>> - * versa.
>> - */
>> - hsw_disable_ips(old_crtc_state);
>> -}
>> -
>> -/* FIXME get rid of this and use pre_plane_update */
>> -static void
>> -intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
>> -{
>> - struct drm_device *dev = crtc->dev;
>> - struct drm_i915_private *dev_priv = to_i915(dev);
>> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>> - int pipe = intel_crtc->pipe;
>> -
>> - intel_pre_disable_primary(crtc, to_intel_crtc_state(crtc->state));
>> + hsw_disable_ips(to_intel_crtc_state(crtc->state));
> BTW thinking about the lack of readout on BDW. In case the BIOS ever
> enables IPS, I think we should sanitize ips_enabled to true on BDW.
> Or maybe just have the redaout code always set ips_enabled=true on BDW?
> That way the first modeset will try to turn it off regardless of whether it
> was enabled or not.
Yes, good idea. :)
>>
>> /*
>> * Vblank time updates from the shadow to live plane control register
>> @@ -5058,6 +5029,11 @@ static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
>> if (pipe_config->update_wm_post && pipe_config->base.active)
>> intel_update_watermarks(crtc);
>>
>> + if (!old_crtc_state->ips_enabled ||
>> + needs_modeset(&old_crtc_state->base) ||
> Shoudldn't that be needs_modeset(new_crtc_state)?
Yes, oops..
>> + pipe_config->update_pipe)
> Why do we have to check that?
In case we take over the hw state from bios..
If we default ips_enabled to true on BDW and read out on HSW again, then this
check will make IPS work, regardless of bios setting..
>> + hsw_enable_ips(pipe_config);
>> +
>> if (old_pri_state) {
>> struct intel_plane_state *primary_state =
>> intel_atomic_get_new_plane_state(to_intel_atomic_state(old_state),
>> @@ -5088,6 +5064,9 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
>> struct intel_atomic_state *old_intel_state =
>> to_intel_atomic_state(old_state);
>>
>> + if (needs_modeset(&pipe_config->base) || !pipe_config->ips_enabled)
>> + hsw_disable_ips(old_crtc_state);
>> +
>> if (old_pri_state) {
>> struct intel_plane_state *primary_state =
>> intel_atomic_get_new_plane_state(old_intel_state,
>> @@ -5096,10 +5075,13 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
>> to_intel_plane_state(old_pri_state);
>>
>> intel_fbc_pre_update(crtc, pipe_config, primary_state);
>> -
>> - if (old_primary_state->base.visible &&
>> + /*
>> + * Gen2 reports pipe underruns whenever all planes are disabled.
>> + * So disable underrun reporting before all the planes get disabled.
>> + */
>> + if (IS_GEN2(dev_priv) && old_primary_state->base.visible &&
>> (modeset || !primary_state->base.visible))
>> - intel_pre_disable_primary(&crtc->base, old_crtc_state);
>> + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
>> }
>>
>> /*
>> @@ -6231,12 +6213,25 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
>> static bool pipe_config_supports_ips(struct drm_i915_private *dev_priv,
>> struct intel_crtc_state *pipe_config)
>> {
>> + u8 visible_planes;
>> +
>> if (pipe_config->ips_force_disable)
>> return false;
>>
>> if (pipe_config->pipe_bpp > 24)
>> return false;
>>
>> + visible_planes = pipe_config->active_planes & ~BIT(PLANE_CURSOR);
>> +
>> + /*
>> + * FIXME IPS should be fine as long as one plane is
>> + * enabled, but in practice it seems to have problems
>> + * when going from primary only to sprite only and vice
>> + * versa.
>> + */
>> + if (visible_planes != BIT(PLANE_PRIMARY))
>> + return false;
> I think that should be '(active_planes & PRIMARY) == 0'. As in we don't
> care what the other planes are doing, IPS just tracks the primary state
> (for the time being).
Oops, faultily assumed from the comment that IPS only worked with the primary plane
or sprite plane, not both. I'll correct it.
> What's missing from this patch is changing the cdclk vs. ips workaround
> to not assume that cdclk can be increased to accomodate ips.
Hm true, I missed that..
Will send a new version in a bit.
>> +
>> /* HSW can handle pixel rate up to cdclk? */
>> if (IS_HASWELL(dev_priv))
>> return true;
>> @@ -6378,9 +6373,6 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
>>
>> intel_crtc_compute_pixel_rate(pipe_config);
>>
>> - if (HAS_IPS(dev_priv))
>> - hsw_compute_ips_config(crtc, pipe_config);
>> -
>> if (pipe_config->has_pch_encoder)
>> return ironlake_fdi_compute_config(crtc, pipe_config);
>>
>> @@ -10488,6 +10480,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
>> pipe_config);
>> }
>>
>> + if (HAS_IPS(dev_priv))
>> + hsw_compute_ips_config(intel_crtc, pipe_config);
>> +
>> return ret;
>> }
>>
>> diff --git a/drivers/gpu/drm/i915/intel_pipe_crc.c b/drivers/gpu/drm/i915/intel_pipe_crc.c
>> index 61641d479b93..1f5cd572a7ff 100644
>> --- a/drivers/gpu/drm/i915/intel_pipe_crc.c
>> +++ b/drivers/gpu/drm/i915/intel_pipe_crc.c
>> @@ -541,8 +541,6 @@ static void hsw_pipe_A_crc_wa(struct drm_i915_private *dev_priv,
>> * completely disable it.
>> */
>> pipe_config->ips_force_disable = enable;
>> - if (pipe_config->ips_enabled == enable)
>> - pipe_config->base.connectors_changed = true;
>> }
>>
>> if (IS_HASWELL(dev_priv)) {
>> --
>> 2.15.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list