[Intel-gfx] [PATCH v6 0/7] drm/fbdev: Panel orientation connector property support

Daniel Vetter daniel at ffwll.ch
Wed Nov 29 09:59:14 UTC 2017


On Tue, Nov 28, 2017 at 02:36:09PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 28-11-17 11:27, Daniel Vetter wrote:
> > On Sat, Nov 25, 2017 at 06:33:34PM +0100, Hans de Goede wrote:
> > > Hi All,
> > > 
> > > Here is v6 of my series to add a "panel orientation" property to
> > > the drm-connector for the LCD panel to let userspace know about LCD
> > > panels which are not mounted upright, as well as detecting upside-down
> > > panels without needing quirks (like we do for 90 degree rotated screens).
> > > 
> > > Bartlomiej, can we please have your Acked-by for merging patches 1,
> > > 6 and 7 through the drm tree?
> > > 
> > > New in v6:
> > > -Fix / reference kernel-doc comments
> > > -Don't export the DRM_MODE_PANEL_ORIENTATION_* defines in the UAPI
> > > -Move i915 dsi hardware rotation state read-out to intel_dsi_init()
> > > 
> > > New in v5:
> > > -Add kernel-doc comment documenting drm_get_panel_orientation_quirk()
> > > -drm_fb_helper: Only use hardware (crtc primary plane) rotation for
> > >   180 degrees for now as 9-/270 degrees rotation requires special handling
> > > 
> > > New in v4:
> > > -Fix drm_fb_helper code setting an invalid rotation value on the primary
> > >   plane of disabled/unused crtcs (caught by Fi.CI)
> > > 
> > > New in v3:
> > > -As requested by Daniel v3 moves the quirks over from the fbdev
> > >   subsys to the drm subsys. I've done this by simpy starting with a copy of
> > >   the quirk table and eventually removing the fbdev version.
> > > 
> > > The 1st patch in this series is a small fbdev/fbcon patch, patches 2-5
> > > are all drm patches and patches 6-7 are fbdev/fbcon patches again. As
> > > discussed previously the plan is to merge all 7 patches through the
> > > drm tree.
> > 
> > I think from the drm and i915 side of things this all looks ready (well
> > pls double-check that CI also approves before merging).
> 
> The CI says state is warning, see:
> https://patchwork.freedesktop.org/series/32447/
> and specifically:
> https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_7290/shards.html
> 
> Which I find hard to read as I see no tests going to orange, only
> 3 tests moving to red, which AFAICT is failed. Clicking on the tests
> link to get history all 3 tests seem to fail in the same way quite
> often (2 out of 3) or somewhat often (the last one). Also the failures
> seem unrelated to my changes
> 
> So how do I deal with this, resend v7 to get CI to run again and hope
> I get a success result for all tests this time ?

-rc1 set CI on fire, we had to entirely disable reporting shard results.

Note that in the mail report you get annotations of known bugs, and the
skip<->pass flip-floppers are fallout from CI being on fire.

So looks all good to go.
-Daniel


> 
> > Just needs an ack/review from Bart, and then it's probably simplest if you
> > merge it all through drm-misc - the i915 side is tiny.
> 
> Ok, I will wait for an Ack from Bart and then merge this through drm-misc,
> thank you for the review.
> 
> Regards,
> 
> Hans
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the Intel-gfx mailing list