[Intel-gfx] [PATCH v2 2/3] drm/i915: Wait for pipe to start on i830 as well
Ville Syrjala
ville.syrjala at linux.intel.com
Wed Nov 29 15:37:31 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
We should make sure the pipe has fully started when we enable it from
the i830 "power well". Otherwise theoretically i830 could also hit
problems with vblank timestamps jumping around (since we skip the
wait during modeset on i830). Additionally moving planes between the
pipes etc. might not work correctly until both pipes are actually up and
running.
v2: Less pointless duplication in the code (Chris)
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7280dd699316..e7309d4d4992 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14679,6 +14679,7 @@ int intel_modeset_init(struct drm_device *dev)
void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
{
+ struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
/* 640x480 at 60Hz, ~25175 kHz */
struct dpll clock = {
.m1 = 18,
@@ -14742,6 +14743,8 @@ void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
I915_WRITE(PIPECONF(pipe), PIPECONF_ENABLE | PIPECONF_PROGRESSIVE);
POSTING_READ(PIPECONF(pipe));
+
+ intel_wait_for_pipe_scanline_moving(crtc);
}
void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
--
2.13.6
More information about the Intel-gfx
mailing list