[Intel-gfx] [PATCH 01/13] drm/i915: Let's use more enum intel_dpll_id pll_id.

[Mika Kahola]

On Tue, 2017-10-03 at 00:06 -0700, Rodrigo Vivi wrote:
> No functional change expected. Just let's use this enum
> when possible and also same standard pll_id name
> so we can rework gen9+ port clock later.
> 
> Cc: Mika Kahola <mika.kahola at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Reviewed-by: Mika Kahola <mika.kahola at intel.com>

> ---
>  drivers/gpu/drm/i915/intel_ddi.c | 34 ++++++++++++++++++----------
> ------
>  1 file changed, 18 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 93cbbcbbc193..b5dd82a0e357 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1102,14 +1102,14 @@ static int hsw_ddi_calc_wrpll_link(struct
> drm_i915_private *dev_priv,
>  }
>  
>  static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
> -			       uint32_t dpll)
> +			       enum intel_dpll_id pll_id)
>  {
>  	i915_reg_t cfgcr1_reg, cfgcr2_reg;
>  	uint32_t cfgcr1_val, cfgcr2_val;
>  	uint32_t p0, p1, p2, dco_freq;
>  
> -	cfgcr1_reg = DPLL_CFGCR1(dpll);
> -	cfgcr2_reg = DPLL_CFGCR2(dpll);
> +	cfgcr1_reg = DPLL_CFGCR1(pll_id);
> +	cfgcr2_reg = DPLL_CFGCR2(pll_id);
>  
>  	cfgcr1_val = I915_READ(cfgcr1_reg);
>  	cfgcr2_val = I915_READ(cfgcr2_reg);
> @@ -1162,7 +1162,7 @@ static int skl_calc_wrpll_link(struct
> drm_i915_private *dev_priv,
>  }
>  
>  static int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv,
> -			       uint32_t pll_id)
> +			       enum intel_dpll_id pll_id)
>  {
>  	uint32_t cfgcr0, cfgcr1;
>  	uint32_t p0, p1, p2, dco_freq, ref_clock;
> @@ -1246,7 +1246,8 @@ static void cnl_ddi_clock_get(struct
> intel_encoder *encoder,
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder-
> >base.dev);
>  	int link_clock = 0;
> -	uint32_t cfgcr0, pll_id;
> +	uint32_t cfgcr0;
> +	enum intel_dpll_id pll_id;
>  
>  	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config-
> >shared_dpll);
>  
> @@ -1299,17 +1300,18 @@ static void skl_ddi_clock_get(struct
> intel_encoder *encoder,
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder-
> >base.dev);
>  	int link_clock = 0;
> -	uint32_t dpll_ctl1, dpll;
> +	uint32_t dpll_ctl1;
> +	enum intel_dpll_id pll_id;
>  
> -	dpll = intel_get_shared_dpll_id(dev_priv, pipe_config-
> >shared_dpll);
> +	pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config-
> >shared_dpll);
>  
>  	dpll_ctl1 = I915_READ(DPLL_CTRL1);
>  
> -	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
> -		link_clock = skl_calc_wrpll_link(dev_priv, dpll);
> +	if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
> +		link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
>  	} else {
> -		link_clock = dpll_ctl1 &
> DPLL_CTRL1_LINK_RATE_MASK(dpll);
> -		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll);
> +		link_clock = dpll_ctl1 &
> DPLL_CTRL1_LINK_RATE_MASK(pll_id);
> +		link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
>  
>  		switch (link_clock) {
>  		case DPLL_CTRL1_LINK_RATE_810:
> @@ -1390,17 +1392,17 @@ static void hsw_ddi_clock_get(struct
> intel_encoder *encoder,
>  }
>  
>  static int bxt_calc_pll_link(struct drm_i915_private *dev_priv,
> -				enum intel_dpll_id dpll)
> +			     enum intel_dpll_id pll_id)
>  {
>  	struct intel_shared_dpll *pll;
>  	struct intel_dpll_hw_state *state;
>  	struct dpll clock;
>  
>  	/* For DDI ports we always use a shared PLL. */
> -	if (WARN_ON(dpll == DPLL_ID_PRIVATE))
> +	if (WARN_ON(pll_id == DPLL_ID_PRIVATE))
>  		return 0;
>  
> -	pll = &dev_priv->shared_dplls[dpll];
> +	pll = &dev_priv->shared_dplls[pll_id];
>  	state = &pll->state.hw_state;
>  
>  	clock.m1 = 2;
> @@ -1419,9 +1421,9 @@ static void bxt_ddi_clock_get(struct
> intel_encoder *encoder,
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder-
> >base.dev);
>  	enum port port = intel_ddi_get_encoder_port(encoder);
> -	uint32_t dpll = port;
> +	enum intel_dpll_id pll_id = port;
>  
> -	pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll);
> +	pipe_config->port_clock = bxt_calc_pll_link(dev_priv,
> pll_id);
>  
>  	ddi_dotclock_get(pipe_config);
>  }
-- 
Mika Kahola - Intel OTC