[Intel-gfx] [PATCH 2/9] drm/i915: Redo plane sanitation during readout
Ville Syrjala
ville.syrjala at linux.intel.com
Wed Oct 11 16:04:48 UTC 2017
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Unify the plane disabling during state readout by pulling the code into
a new helper intel_plane_disable_noatomic(). We'll also read out the
state of all planes, so that we know which planes really need to be
diabled.
Additonally we change the plane<->pipe mapping sanitation to work by
simply disabling the offending planes instead of entire pipes. And
we do it before we otherwise sanitize the crtcs, which means we don't
have to worry about misassigned planes during crtc sanitation anymore.
v2: Reoder patches to not depend on enum old_plane_id
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Alex Villacís Lasso <alexvillacislasso at hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103223
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 116 ++++++++++++++++++++---------------
1 file changed, 67 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 825ab00b6639..a9fd3b8fa922 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2729,6 +2729,23 @@ intel_set_plane_visible(struct intel_crtc_state *crtc_state,
crtc_state->active_planes);
}
+static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
+ struct intel_plane *plane)
+{
+ struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+
+ intel_set_plane_visible(crtc_state, plane_state, false);
+
+ if (plane->id == PLANE_PRIMARY)
+ intel_pre_disable_primary_noatomic(&crtc->base);
+
+ trace_intel_disable_plane(&plane->base, crtc);
+ plane->disable_plane(plane, crtc);
+}
+
static void
intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
struct intel_initial_plane_config *plane_config)
@@ -2786,12 +2803,7 @@ intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
* simplest solution is to just disable the primary plane now and
* pretend the BIOS never had it enabled.
*/
- intel_set_plane_visible(to_intel_crtc_state(crtc_state),
- to_intel_plane_state(plane_state),
- false);
- intel_pre_disable_primary_noatomic(&intel_crtc->base);
- trace_intel_disable_plane(primary, intel_crtc);
- intel_plane->disable_plane(intel_plane, intel_crtc);
+ intel_plane_disable_noatomic(intel_crtc, intel_plane);
return;
@@ -5923,6 +5935,7 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
enum intel_display_power_domain domain;
+ struct intel_plane *plane;
u64 domains;
struct drm_atomic_state *state;
struct intel_crtc_state *crtc_state;
@@ -5931,11 +5944,12 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,
if (!intel_crtc->active)
return;
- if (crtc->primary->state->visible) {
- intel_pre_disable_primary_noatomic(crtc);
+ for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
- intel_crtc_disable_planes(crtc, 1 << drm_plane_index(crtc->primary));
- crtc->primary->state->visible = false;
+ if (plane_state->base.visible)
+ intel_plane_disable_noatomic(intel_crtc, plane);
}
state = drm_atomic_state_alloc(crtc->dev);
@@ -14678,22 +14692,38 @@ void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
POSTING_READ(DPLL(pipe));
}
-static bool
-intel_check_plane_mapping(struct intel_crtc *crtc)
+static bool intel_plane_mapping_ok(struct intel_crtc *crtc,
+ struct intel_plane *primary)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- u32 val;
+ enum plane plane = primary->plane;
+ u32 val = I915_READ(DSPCNTR(plane));
- if (INTEL_INFO(dev_priv)->num_pipes == 1)
- return true;
+ return (val & DISPLAY_PLANE_ENABLE) == 0 ||
+ (val & DISPPLANE_SEL_PIPE_MASK) == DISPPLANE_SEL_PIPE(crtc->pipe);
+}
- val = I915_READ(DSPCNTR(!crtc->plane));
+static void
+intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
+{
+ enum pipe pipe;
- if ((val & DISPLAY_PLANE_ENABLE) &&
- (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe))
- return false;
+ if (INTEL_GEN(dev_priv) >= 4)
+ return;
- return true;
+ for_each_pipe(dev_priv, pipe) {
+ struct intel_crtc *crtc =
+ intel_get_crtc_for_pipe(dev_priv, pipe);
+ struct intel_plane *plane =
+ to_intel_plane(crtc->base.primary);
+
+ if (intel_plane_mapping_ok(crtc, plane))
+ continue;
+
+ DRM_DEBUG_KMS("%s attached to the wrong pipe, disabling plane\n",
+ plane->base.name);
+ intel_plane_disable_noatomic(crtc, plane);
+ }
}
static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
@@ -14749,33 +14779,15 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,
/* Disable everything but the primary plane */
for_each_intel_plane_on_crtc(dev, crtc, plane) {
- if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
- continue;
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
- trace_intel_disable_plane(&plane->base, crtc);
- plane->disable_plane(plane, crtc);
+ if (plane_state->base.visible &&
+ plane->base.type != DRM_PLANE_TYPE_PRIMARY)
+ intel_plane_disable_noatomic(crtc, plane);
}
}
- /* We need to sanitize the plane -> pipe mapping first because this will
- * disable the crtc (and hence change the state) if it is wrong. Note
- * that gen4+ has a fixed plane -> pipe mapping. */
- if (INTEL_GEN(dev_priv) < 4 && !intel_check_plane_mapping(crtc)) {
- bool plane;
-
- DRM_DEBUG_KMS("[CRTC:%d:%s] wrong plane connection detected!\n",
- crtc->base.base.id, crtc->base.name);
-
- /* Pipe has the wrong plane attached and the plane is active.
- * Temporarily change the plane mapping and disable everything
- * ... */
- plane = crtc->plane;
- crtc->base.primary->state->visible = true;
- crtc->plane = !plane;
- intel_crtc_disable_noatomic(&crtc->base, ctx);
- crtc->plane = plane;
- }
-
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
if (crtc->active && !intel_crtc_has_encoders(crtc))
@@ -14883,14 +14895,18 @@ void i915_redisable_vga(struct drm_i915_private *dev_priv)
/* FIXME read out full plane state for all planes */
static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *primary = to_intel_plane(crtc->base.primary);
- bool visible;
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+ struct intel_plane *plane;
- visible = crtc->active && primary->get_hw_state(primary);
+ for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+ bool visible = plane->get_hw_state(plane);
- intel_set_plane_visible(to_intel_crtc_state(crtc->base.state),
- to_intel_plane_state(primary->base.state),
- visible);
+ intel_set_plane_visible(crtc_state, plane_state, visible);
+ }
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
@@ -15079,6 +15095,8 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
/* HW state is read out, now we need to sanitize this mess. */
get_encoder_power_domains(dev_priv);
+ intel_sanitize_plane_mapping(dev_priv);
+
for_each_intel_encoder(dev, encoder) {
intel_sanitize_encoder(encoder);
}
--
2.13.6
More information about the Intel-gfx
mailing list